Need help finding 119 Sat

[DrOz]

I got the 110 sat but I can't seem to find the 119 sat.. I have a Dish Pro 500 and a 310:10 receiver.. I've tryed almost everything I can think of so any help would be much appreciated.

I'm in London Ontario Canada so thats why I'm not using Mills sat finder.

[DrOz]

Come on someone help me out this thing is driving me crazy..

[rykrishell]

I had a quick look at my dish, Im from cambridge ont about one hour east of you anyways my elevation is around 30 and you will need to skell (turn it on a angle so one lnb is higher then the other ) the the dish to some wear around 120 because 119 sat is heighter then 110 hope this helps you out make sure you do a check switch as well :D

[Dave411]

It might be that you are picking up 110 on the 119 lnb meaning the 110 lnb is then looking at 101 which would not show up. Try moving the dish a bit farther to the West so that the dish is picking up 119 & 110 instead of 110 & 101.

[BirdieMod]

That happens. Look an your "Y" Bracket and find the 110 lnb mark, Cover it with something temp, Now you know you are using the 119 lnb and aim the dish. Use transponders above 10 as lower are spotbeams that may not have signal.

[DrOz]

thx for the info guys I'll try that..:)