Help Receiver Wont Take Bin

[Daniel27]

My receiver wont take a bin i have a ace 2500 (smartwave 2500a N2) (panset)
and it wont let me take a bin i want to add BEV

PLS HELP

[Crow 492]

What loader are you yousing.

[Daniel27]

tried bl loader and fta loader it communicates with my reciever then says write fail

[Crow 492]

are you running a null modem cable or strait thru

You need a stait thru cable for that unit that eror means eather the com port is not com 1 on your computer or not the right cable ? what bin are you using

[Daniel27]

straight thru, i loaded a bunch of other bins and they worked fine, now it just wont take

[Daniel27]

right now im using 257pb, trying to load 257v4b or other

[Daniel27]

maby the receiver is too hot?

[Daniel27]

do ik need jtags?

[Daniel27]

you still there?

[Crow 492]

X-85CS_060318_273T_G
C_DN_BEV_RTN_TVE_4se
c_api(N).zip

This is the file for that unit that is a pansat 2500a clone right ? its clone safe I dont know what bin that is that you posted

[Crow 492]

Its in the public downlaods here

[Crow 492]

I think its the bin that you are using

[Daniel27]

still same error

[Crow 492]

Did you try a diferent com port setting?

[Daniel27]

i tried all com ports and i dont have the option of baud rates on my loader and GT_loader doesent work on mine (wont take the model)

[Crow 492]

Ok I uploaded the latest uploader for the Pansat and Clone 2500A BL Updater v 1.4.0.0

--------------------------------------------------------------------------------

BL Updater v 1.4.0.0

--------------------------------------------------------------------------------

Latest BL Updater


Try this loader with the bin I tolled you and try it if it does not work whait and see if a other member has that unit and could help you. I just uploaded the file and it takes a few to go thrue.

Hope this helps.

[Daniel27]

tried a couple of loaders and the baud rate is set to 1150 or whaterver it is, only
tried all com ports 1 is the only one that communicates with my receiver

[Crow 492]

is your receiver on when you upload it?

[Daniel27]

ok i have to wait till 1 to download anyway

[Daniel27]

ya its on, i even tried to load it when it boots on the third light and it got to 1% then failed

[Crow 492]

Ok Try and when you press download then turn the receiver on see if that works your getting some were.

[Daniel27]

tried it, doesent work :(

[Crow 492]

You PMed me and ask me if you needed a J tag if the receiver turns on and you see the starting page on the TV screen then no. You will need a newbie here that has that unit so they could help you, and hope fully you can get your aswer.

Crow 492