winexplore ?

[willham]

ok I got into a couple rom 102's but cant get into rom10 a23 . my ? is do you have to change the script in winexplore to get in a rom 10 I have a blue nexus

[Pyotr]

ok I got into a couple rom 102's but cant get into rom10 a23 . my ? is do you have to change the script in winexplore to get in a rom 10 I have a blue nexus
Yup.You might need a different flash for your loader.Newd8 maybe and an A23 unlocker script.

[willham]

thankyou for your answer but . the ? was if I need to change anything in the winexplore script not the flash

[mopar611]

Type in Glitching Rom10@23 in the search button on top..

You will get alot of threads with members discussing what flash they used
and what VCC settings that popped there cards..

Mopar

[hackkil]

the loader settings in winexplorer will remain the same,powersinc unlocker is the best for rom10's.

[willham]

that's what i'm get at the VCC setting's . so how do you go about setting them

[Pyotr]

that's what i'm get at the VCC setting's . so how do you go about setting them
I did manage to answer your question.You asked if you needed to change the script,not edit it.I said you'd need an A23 unlocker. So,if you have that,then to change the VCC settings,you start your script in winex, go over to the right field,scroll down 'til you see something like this:


VCC range variables should only be set here if VCC Analyzer is not chosen from menu -or- VCC Analyzer set incorrect values.
VCCStart = &h2b 'High
VCCEnd = &h29 'Low
'Delay range
DelayStart = &h0285
DelayEnd = &h0287
'Tries
Const TriesPerLine = 12
This is from the 101 script so don't use these numbers. Most scripts are very similar, edit your VCC #'s ,start and end settings, then either run the script or close it and save it.
Sorry,can't help with what settings are good for ROM 10.

[willham]

how can I get the setting's for a rom 10 .and thankyou for your help