301 013 single tsop , red crc

[niknare]

I have been playing with a single tsop 301 013, I have been looking for a tsop for gophers, whenwver I down load a file then open it in flashedit, it has a red crc, thse file are supposed to be ready to flash, they have a red crc and box keys are ffffffffff, is this normal, I put my saved original dump in flash edit and it also has a red crc. It is a llitltle confusing, I am using flash edit and choosing single flash 103, when I use jkeys 301 and 508, I also pick the single flash 013. any ideas, I dont know if I should try to load these tsops

[Grizz49]

Yes they are OK. When you mod the tsop of the 301.13 it moves the boxkeys and ird to another location thus the ffffffff. Don't worry about the red crc.

[niknare]

if I add my ird info and box keys to a 301 single tsop, should I check the crc button? The post that had the file said you caould add you own ird info in flash edit? I am using a rom 102 with gopers

[ThunderCloud]

If you are downloading a TSop bin that means it is a public bin and will have no BK's and IRD info you must put you on BK's and IRD info in and when the red box comes up put a check mark in it and it will turn green that will put all info were it needs to be BK's and IRD info will be at the right spot

[Grizz49]

You have to use ird and boxkeys that are on the card(cam) that u are using

[ThunderCloud]

If you are useing a 102 you must use the BK's and IRD info on the card for your Tsop mod or card will not work

[ThunderCloud]

Yes that is right

[Grizz49]

If you are downloading a TSop bin that means it is a public bin and will have no BK's and IRD info you must put you on BK's and IRD info in and when the red box comes up put a check mark in it and it will turn green that will put all info were it needs to be BK's and IRD info will be at the right spot

Not so on the 301.13

[Grizz49]

In simple terms if you download a tsop that is already modded, do NOTHING to it. Just write to ird. Make sure your build is the same. Make sure it is for the type of card u are using.

[Twostep]

Here's some even simpler terms:)

Download and flash ANY DA-build TSOP modified for your particular application, as long as it's not DACA or DAJA (for dual tsop models). Doesn't matter with a 301.013 receiver. I use a DACA TSOP and EEprom in my DALA receiver (NoRSA modded) right now.

That should make your search a bit easier.

[niknare]

what it appers is that I cant use my gopherx teirs, I must program the 013 tsop to the keys and ird numberof an existing 102 card ? I wanted to use gopherx ird numbers so that all my 501 woud be the same and jsut use dthe same card.

[Twostep]

Just put the Gopher data on the 102, bro...:)