011c746c 8ca6a88cfde2e263

[udntcme]

Are these not the ird # and boxkey #'s to use with Sativa's no-rsa ...?Then why in the hell does this not work for a reg_13 single .And yes I have al the .fs file's in flashedit........?A little help here ...for someone who has helped so many over the year's....I thought I was preety good but this is just really stupid...! Unmodded/ modded tsop's..this is BS they are all modded.what the hell is going on with this site...!

[Twostep]

Go to File Downloads/Modded TSOP files. Try #1 or #4, the ones for 301.013 single/NoRSA mod. Pay no attention to the build configuration. As long as it's not DACA or DAJA, it will work with ANY DA build.

Program your Atmega with the TandqV4 program; does a better job with mapping locals.

I just redid the keys and timezone on my 301.013 single - using the Tandq program and a DACA flash/eeprom on a DALA build receiver. Works perfect.

[vicron]

What I did was

1. Program the atmega with the Satvia no rsa mod pfg.
2. Get an unmodified tsop for single chip 301.13
3. Get the additional script for the 301.13 and save it as a .fs file
4. Put the follwing script in notepad and save it as no_rsa.fs in the same directory as flashedit beta 9.

[301.013 No_RSA_Mod SK Bypass]
set(0x3fff40, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fff50, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fff60, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fff70, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fff80, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fff90, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
set(0x3fffc0, 0x011C746C)
set(0x3fffc4, 0x8CA6A88CFDE2E263)
set(0x3fffcc, 0x91FB)
set(0x003FFFA0, get_ascii("Please Enter Your Build Config In CAPS!!!!", "Question", ????, 4))

5. Get an unmodified TSOP for your reciever and open up in flashedit beta 9
6. Apply the no_rsa.fs file in step 4 and save it. Dont interfere with ird or box keys. These will be replaced when you apply no_rsa.fs file
7. Load the TSOP that you just saved, with jkeys.
8. watch TV.

I hope this helps.

[anna]

is the same thing weth 301.13 twin?:)

[udntcme]

Thank's ,I thought this is what I was doing.But I'll follow exactly ...thanx again.

[udntcme]

Success...! Appaently I came up with the correct combination of vid-mod erase prog and unmodded tsop apply no-rsa sk bypass and created EEp SSshhheeeezzzzz...........reg 13 single.........SSSShhheeezzzzz....!!! and Flashedit beta 4 not 9...4 had only the no-rsa sk bypass in it.GGGeeeeezzzzz...! This reg 13 was the beast from hell.Maybe I made it harder than it was supposed to be.Damm FTA...! 2800 is a walk in the park compaired .

[vicron]

Great. Congrats

I have no idea if its the same with a 2 tsop 301.13. I only had experience with the single tsop.

[anna]

OK one, ? , #3 and #4 its the same script?

[vicron]

I am assuming you mean steps 3 and 4. Yes its the same script I am talking about.

[udntcme]

I believe from from my old testing day's you'll only need to modd one of the two tsop's on the reg 13 two tsop model ...I used to be preety good at both but I found the double tsop to be more problimatic..." problimatic"...? spelling. I'm sorry i could not be more help with this. I'm sure your answer is here somewhere.All the best.