311 shows not authorized. need help

[tyfon]

IRD not authorized

I have programmed a 311 ird rev281
with P316 when I got done programming it
all channels were red, so I check experation dates
using GEnt08... SO I change them to 1566
this was done at IRD info, I have used the tier list
that mili posted and they expier in 2007.
so I kept checking and cloud not find any other infomation
where to change dates of expiration.

keys are the lates
tiers are for 12/2006

I also notice that the provider is unkown
I do not know what that means.

does anybody had this problem and how they solved it.

thanks agian

tyfon

[pcpartsrus2001]

Yep, had this problem. You will need to get that thing open again. Try to unlock and read onboard card. If it will not open you will need touse rebelsurf to reglitch it. After you reglitch it, apply the original bin back to it without mods. That should get your provider back. After that, you need to remake a new bin to put back on it and hope it does not go provider unkown. What I had to do was use the original bin, change all exp. dates on it, and used dt tierworks 18 to add only the channels that were not on the original bin. After I did that, I reprogrammed it and all was good. If you will try to read the 311 after you program it, and it comes up provider unknown, you are in bad shape. If you read it and it says the correct provider, youare ok. But you must make sure the provider is correct, no need to even stream it till you can get the provider correct.

[goo_off]

I have 311 and I am new with dish net and need help with loader and the program to load

[goo_off]

O I forgot to say that i did not have a card with the 311 box does the card need to be marred to the box or what

[pcpartsrus2001]

The 311 has an on board card, if you are new to this, I would stay away from trying this one, stay far away. This mod is not for the faint of heart, and you can and most likely will KILL the receiver with a blink of an eye. Do yourself a favor, and go find you a 2700, 2800, or a 3800 something like that and get yourself a yellow card. Or even a blue ROM10 card. It is alot easier to mod these than it is to do a 311.

[tyfon]

Pacpart.....
Thanks for the info.. I have checked the original bin
and it does say DISH.... Having the unknown provider will give me
CAM Not authorized or this is different problem?
all channels are in red.
CA you add to this problem

thanks


Goo- Off on the 311 IRD the CAM in buil tin the IRD.
you must open the CAM with MOD loader.
find the files on how to do it. I will add a image for you to see how is done.

look at post # 18
http://www.dssftp.com/forum/showthread.php?t=58566

tyfon

[tyfon]

Update on the unauthorized 311

Thanks pcpartsrus2001


I took the original image from internal cam.
and look at it in gendt0 and it had dishnetwork,
I change the expiration dates
programmed card and added blocker.

Why I added blocler?
because the cam was at 281 when I program
the cam the first time. then I got the red channels
and the unauthorized screen , then it went to rev 283
and still no tv.

So I was affraid if I did not add the blocker this time it may go
to rev 284.. and we know that rev 284 can not be open.

check all connections
everythingwent well
all channels good to go...

Now I have another 311 rev 283 never been on the stream
open it look at the bin in Gendt08/ and all
RSA are in 0000000000000000000000000000000000000000000
I will need help on this other one
See image for details
second picture shows where to short it to ground
so you can get to reset and update and the it will be
good to be program. I do not know how true this is
I need to read more on this subject. I do not want to burn it.

thank you again

tyfon

[pcpartsrus2001]

I think I would hold off on that one, as I understand it right now, if it has not been subbed before, never being in the stream, you can not do anything with it as of now. We must wait till we can jtag these to get the boxkeys and ird numbers off of them. I have one that I am waiting to do because of that reason. I will let many others fry their receivers first and learn the hard way not to do the ground thing for nothing. Glad I could help ya get the other one going. Good luck.