latest Penga

[LPGAS4U]

Were Can I Find The Latest Penga Blocker

AND WHAT IS IT CALLED

[mopar611]

What is it for ?

[LPGAS4U]

I bought a DP311 from Mili about 3 months ago and I still cant get it up

[fubr]

http://dssftp.com/files/
and in my sig is the how to pages maybe they got something on them too

[fubr]

http://www.bellexpress.vu/311.html

and there is a file on the files page called
311howto.rar and a 311jtag file

[skinerd]

I bought a DP311 from Mili about 3 months ago and I still cant get it up

Tried Viagra???.....................j/k......

Why not, what seems to be the problem?? If you will get a read of the chip, send it to me, I'l send you a modded, blockered, 3m bn102 for it.

[bobsmith161]

I use v22 on my 311 just as you would on any other 102 card but it's a chip same inside as a 102....also add A4 to let the EMM by that rolls key's:cool:

[GallDurnit]

[Tried Viagra???.....................j/k......

Why not, what seems to be the problem?? If you will get a read of the chip, send it to me, I'l send you a modded, blockered, 3m bn102 for it.


Good info!!.......If you buy from Milli your going to to get it up with or without Viagra!!!...lmao

[Hyperion]

My problem is more tasking! I have the 811 from Mili, together with Milikobu. Went through all latest instruction provided by Mili but I made a mistake. I was loading the Penga blocker and I replaced BADBEEF etc with my code ACCESSDENIEDHERE. After I copied the file in I realised my mistake, I had entered 6 non-hex characters, invalid for the password. Now the system has a bad password and I cannot get in to change it. I am reluctant to erase vereything without serious help - once I blow in cardless CAM - I am dead. I need all the help I can get from all you experienced testers...............

[skinerd]

Open the file that you wrote in a hex editor, see if it shows what was actually written, if it does you will have the password.

If not sure how to do that, send it to me at skinerd@dssftp.com and I'll look at it.

[GallDurnit]

I am no pro at this but have done a couple of 311's and still learning. You will need a unlooper and Nagra Master ver2.0 for this to work. Open up your original bin in Nagra Master go to line 8210 and double click that line, go to address 821E and highlight 06 and change that to 03, Press enter, you just turned the blocker off. Now force write the bin, open bin(duh, it's open), write to bin (it won't write but now you will be asked if you want to force write the bin) force write the bin. You should now be able to read your bin!!:)

[Bow]

My problem is more tasking! I have the 811 from Mili, together with Milikobu. Went through all latest instruction provided by Mili but I made a mistake. I was loading the Penga blocker and I replaced BADBEEF etc with my code ACCESSDENIEDHERE. After I copied the file in I realised my mistake, I had entered 6 non-hex characters, invalid for the password. Now the system has a bad password and I cannot get in to change it. I am reluctant to erase vereything without serious help - once I blow in cardless CAM - I am dead. I need all the help I can get from all you experienced testers...............

Just maybe........AC CE DE ED EE AD F0 0D

[moneyfarmer0]

Do Rom 102 Cards Work? If So, Do They Get Hit Or Have Alot Of Down Time? Where Is Best Place To Get Them?
Thanks
Cya

[OverEasy]

I am no pro at this but have done a couple of 311's and still learning. You will need a unlooper and Nagra Master ver2.0 for this to work. Open up your original bin in Nagra Master go to line 8210 and double click that line, go to address 821E and highlight 06 and change that to 03, Press enter, you just turned the blocker off. Now force write the bin, open bin(duh, it's open), write to bin (it won't write but now you will be asked if you want to force write the bin) force write the bin. You should now be able to read your bin!!:)


Gall Which switches on the unlooper need to be on? or can I use an ISO to do this?

[GallDurnit]

Unlooper only!! I have a modded red board t911 clone with dip #3 down. You may have to reset ATR before write and have the pot turned up as there is no glitching to this proceedure. This works, I just tested before this post.

[larryking123]

convert acess to binary and reverse to ebic

[Hyperion]

Thanks for all the suggestions, I have managed to overcome the problem. I used the original saved bin and was able to load the cam once more, even though I was unable to read the cam due to the p/w problem. Once I had entered this info, I continued to load the fresh bin and CORRECT blocker code. Did not know that I still had access without the correct p/w - surely that's not normal.

[cocomunk]

It's probably when you try to patch it with the blocker it didnt write.So no blocker or password was writen to it.That why you could write to it with out problem.

cocomunk