rom 101 rev 007

[pluto]

ok im unlocking 101 007 and im getting this:
212FFFF 00:00:32
0299 121212FF1212FF121212FFFF1212FFFFFF1212FF12FF12FF12 12FFFF12FFFFFF12FFFFFFFFFF12FFFF12FF12FF12FFFF 00:00:38
029A 12XX12FF12FFFFFFFFFFFFFF1212FFFFFF12FFFF12FF12FFFF FFFFFFFF1212FF121212FF12FF121212FFFF12FFFF12FF 00:00:43
029B 12FFFFFF1212FFFF1212FFFFFF12FFFFFF1212FF12FFFF1212 FFFFFFFF12FFFF1212FFFF12FFFFFFXXFFFFFFFF12FFFF 00:00:49
029C 12
i want to know if im going in the right direction is this good respond?
thank you

[Pyotr]

ok im unlocking 101 007 and im getting this:
212FFFF 00:00:32
0299 121212FF1212FF121212FFFF1212FFFFFF1212FF12FF12FF12 12FFFF12FFFFFF12FFFFFFFFFF12FFFF12FF12FF12FFFF 00:00:38
029A 12XX12FF12FFFFFFFFFFFFFF1212FFFFFF12FFFF12FF12FFFF FFFFFFFF1212FF121212FF12FF121212FFFF12FFFF12FF 00:00:43
029B 12FFFFFF1212FFFF1212FFFFFF12FFFFFF1212FF12FFFF1212 FFFFFFFF12FFFF1212FFFF12FFFFFFXXFFFFFFFF12FFFF 00:00:49
029C 12
i want to know if im going in the right direction is this good respond?
thank you

Looks about perfect.You want a few XX's in there.It should pop soon. What glitcher are you using and have you tried different dips setting(if you have dips).Have Fun

[pluto]

im using mikobu III with this settings
rom 101 reader
delay start=0294
delay limit=02b8
vcc start=39 high
vcc end=36 low

the settings in rom 101 reader are as follow:
data baud=115200
reset baud=115200
parity=none
rectimeout=1000
byte delay=100
reset delay=100
stop bits=1
byte convertion=direct
flush receive buffer before wrrite =check mark
dtr=low
rts=high
toggle this line for a reset=rts
im using 5k pot so now im going to try to get more xxx like you said im using newd11 so please tell me if my settings are ok my power supplly is set to 9v.
thank you

[Pyotr]

OK,so no dips. Have to do it the hard way.Editing the 101 script and playing with pot settings. Can't tell you exact pot settings.I used trial and error turn the pot down 'til the program errors out. Then just raise it a tiny bit 'til the program will run again.You'ss see alot of XX's at first.You don't want too many XX's. %Then you can try different VCC's and delays by efiting rom101reader.xvb. Her's the one that worked on mine. If you edit the program you run "install interceptor" otherwise it'll change the settings.

VCCStart = &h2b 'High
VCCEnd = &h29 'Low

Delay Start : 285
Delay Limit : 287
2 and 5 on

[pluto]

i unlock my card my friend i just play with the vcc and that is it
thank you for your help

[ghost1412]

hi guys

This is my first time I try to unlock my ROM 101 Rev 007
I am using Nexus 4619 can you tell me what file should I use to unlock my card ? or do u have a link on How to unlock Rom 101 Rev 007

This is what i am getting when I try to read the card
ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 30 31 20 52 65 76 30 30 37 3D
CAM Type: ROM101 Rev007
Setting IFS
Provider: Unknown
Reading Card image...
Failed to read card. (Retries: 15)

[Pyotr]

hi guys
This is my first time I try to unlock my ROM 101 Rev 007
I am using Nexus 4619 can you tell me what file should I use to unlock my card ? or do u have a link on How to unlock Rom 101 Rev 007
This is what i am getting when I try to read the card
ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 30 31 20 52 65 76 30 30 37 3D
CAM Type: ROM101 Rev007
Setting IFS
Provider: Unknown
Reading Card image...
Failed to read card. (Retries: 15)


Read the ROM 101 forum.It's all there