Bev Current Black Channel Discussions

[Crazy1_79]

I though I would start a thread so we all could put our heads together on this one.

[Crazy1_79]

this is what I have acomplished. I removed blocker, stream a rev 240 card, got it to update to 244, got all channels back, I then glitched back into the card and am currently testing a blocker with a 244 spoof revision I added manually. I am waiting to see if I can get picture working off of a 244 image base with the 83 opcodes

[Crazy1_79]

the otp marking of the cards is because of glitching and landing a glitch on the 83 opcodes which then sends some sort of response to mark the otp. at least that is the way I understand it.

[Hopey007]

Wonder if blocker can be put on that 244 bin and still be opened/read in nagra edit.


Hopey007

[Crazy1_79]

possibly hopey, not really sure what all the 244 update did, I seem to be stuck on acquiring sattelite signal now. maybe remove intercept?

[Hopey007]

I am sure update 243 wrote code over the intercept code and locked people out. So it may be in the way.

Hopey007

[1one]

Just now finding the thread. Crazy compare before and after 244.

[1one]

If a mod will delete the thread iI started please.

[Crazy1_79]

removed all tiers from image, and it booted right up. gonna try again with tiers instead of one huge 3m tier, could be overloading my 2700?

[Crazy1_79]

booted up, ppv movies are still missing? that is right back to square one, but I have a 244 image and blocker and it is working with marked otp. so we have everything except ppv movies 350-400

[1one]

Code change should start at E030. Can you compare bins crazy?

[1one]

How bad is the mark? I.E. FF ?

[Crazy1_79]

let me look hopey, I know the blocker I was using moved the intercept but I will open up orignal image and compare where it was and where it is now.

[Crazy1_79]

I have a 0f at 3061 I have a 07 at 308d and a 07 at 308e

[Crazy1_79]

Code change should start at E030. Can you compare bins crazy?
I don't have a 243 bin I started at 240 virgin.

[Crazy1_79]

intercept is still valid at this point, I have reread the card several times since original glitch. I now need to see if it locked properly since negotiating its first emm, I am using autolock blocker.

[Crazy1_79]

I wish I could upload the orignal 244 image so you guys could get in on this

[1one]

Both 07 look normal. of should be 3f?

[Crazy1_79]

card is locked, it seems to be working guys. but 350-400 is gone, not even in the guide, i have channel 340 saying that if I am missing channels. to call this number.

[1one]

Can we get a mod in here to OK this?

[Crazy1_79]

Both 07 look normal. of should be 3f?
not sure 1one, don't tinker with bev to much, but I am having a ball. pm me a email address, I am sending you my raw 244 image

[1one]

Still no answer to otp ? Dont mark it up so bad we cant get a blocker on it.

[Crazy1_79]

me, do something like that? I don't think so! lol,

[1one]

I'd rather everyone to see this and help if possible. 10 mem. and 23 quest watching. I know someone has a cam they can sacrifice.

[Crazy1_79]

t160hq, I see you are viewing this thread can you permit me to upload a 244 bin I glitched back into? or can I give it to you to post in this thread so we can work on it? I have tv back we need the movies and to tweak a blocker. and that is probally going beyone my skill level. I think we are good to go though.

[Hopey007]

Try letting emm 40 pass. I don't want to be responsable for screwing your card so do it if you want to. Read it has to do with 07 command.


hopey

[Crazy1_79]

Wonder if blocker can be put on that 244 bin and still be opened/read in nagra edit.
Hopey007
Yes hopey, that is exactly what I just did.

[Crazy1_79]

If we can get it upoaded I have the 244 bin with intercept installed. you guys won't have to worry about marking otp since I have the base bin to start with.

[1one]

Hopey007'
His 07 command is normal.

[1one]

Lets calm down here. I have been wanting to do some coding my ownself. i think if we paste v27 blocker we only need to do minor updates for this rev.

[Crazy1_79]

I just emailed mili the bin and asked him to upload it here, it is up to him if he wants to do it.

[Crazy1_79]

I agree with the 27 blocker idea. I am using codespaces autolock bev version, I looked for v27 today but only found the second part of the patch, the first part looked like it was delted because of errors. but rom10x is so overloaded with people right now, I got impatient and didn't check the entire thread.

[mili]

http://dssftp.com/files/index.php?m=category&CATID=46

The file is there, wait until after 1am to get it without a VIP membership.

mili

[1one]

Thread is growing and not a mod in site? I know it takes a few to get something done here but let us have our fun. Its Friday mods and mili.

[Crazy1_79]

well that is what we were trying to get around Mili, but thanks. 1one, pm me your email. I will send you the bin.

[1one]

Its Ok. It will take me a few to rejoin you guys. Guess you gotta pay to play. I'm on dial-up so I'll be a few. Dont have vip yet but paying up now. Sorry to be so impatient mili. i didnt mean to jump the gun. Just a little excited.

[ruciz]

Hmm - after this rain passes I will grab the file and see what I can get going on emu.

But folling this thread only rev 244 comes in now correct?

[Crazy1_79]

I don't know if the ppv movie problem is my tiers? or if it lies somewhere else? once we get that figured, I have patched a blocker to it, seems to be working. I'm saying we about got this licked. the image is in the downloads. It's been awhile since I pulled one out of my ass guys so don't expect it again for another 6 months! the image in the downloads should have intercept installed and tiers. but ppv movies are missing. you guys can play with it, here is the modified blocker I put on it, I just changed the rev to match 244 like the bin.

[Crazy1_79]

HERE IS THE BLOCKER , change your password, I put it back to default!

; ------------------------------------
; ------------------------------------
; ------------------------------------
; c0d3sP4c3 - ROM 102 Blocker v4.1
; Public Release Date: 03-11-2006
; Works with, BEV - Rev 240/241
; Clean the codespace back to Rev 240
; before applying this blocker.
; Works with 301.013 ird's also.
; Spoofs revision level to Rev 242.
; Don't worry about forgetting to lock
; the blocker! It will lock itself for
; you when you stick it in the IRD.
; ------------------------------------
; ------------------------------------
; ------------------------------------
; Spoof Revision Level 242.
; ------------------------------------
$30D26526576323434
; ------------------------------------
; Spoof USW 402A.
; ------------------------------------
$30E82402A
; ------------------------------------
; Patch the Bugcatcher Table.
; ------------------------------------
$3170=40038800301001141900801A80000060
$3180=DB900000885980750095999038008AB3
$3190=80C80000000000000000000000000000
; ------------------------------------
; Auto Locking Blocker Code and New
; A0 FF Intercept.
; ------------------------------------
$9000=1763A1CA270D71804FC1906F26087100
$9010=CC7D99CC60ECAE07D60DFAD190702615
$9020=5A2AF53F90A64BB76B1864CD7C16906F
$9030=9001CC7A95CC7A998971804FC1906F26
$9040=11A601B790A64BB76B1864CD7C16906F
$9050=9001B692CE90785AD19079270C5A2AF8
$9060=7100853F924FCC55D3710085B6928700
$9070=FFFFFFFFFFFFFFFF0442A3A4A6000000
; ------------------------------------
; Remove Original A0 FF Intercept.
; ------------------------------------
$8210=00000000000000000000000000000000
$8220=00000000000000000000000000000000
; ------------------------------------
; Replace DEADBEEFBAADF00D below to
; your personal password of choice.
; ------------------------------------
$9070:DEADBEEFBAADF00D
; ------------------------------------
; If you want to lock it manually
; change the 00 below to 01 otherwise
; the blocker will lock itself
; automatically when inserted in the
; receiver.
; 00 = Unlocked - Autolock active.
: 01 = Locked - Manually Locked.
; ------------------------------------
$906F100

[1one]

Same thing I was thinking crazy. See if you can get back in after streaming.

[Crazy1_79]

i have to be up for work in a few hours guys, I have to duck out, sorry, I ain't had this much fun testing in some time!! thanks for the ride b*v, but I don't like to lose and it looks like I didn't this time!

[fubr]

Thread is growing and not a mod in site? I know it takes a few to get something done here but let us have our fun. Its Friday mods and mili.You never know

[1one]

I have faith fubr. I just hope his blocker is good. Trying to get his bin to see otp.

[Crazy1_79]

Same thing I was thinking crazy. See if you can get back in after streaming.
yes, I just unlocked and read it!! hope you guys can get ppv back before i wake up! porn is back, just need movies. in case someone wants to watch the ol' brokeback mountain! LMAO, sick bastards.

[Crazy1_79]

blocker may need tweeked for otp mask 1one. I'm not a coder by any means, I just usally know what needs to be done and wait for it. I only see the one 0F for the mark if the two 07's are legit.

[1one]

Before you go to bed crazy, can u upload blocker? i wanna play.

[ruciz]

Maybe its as simple as new PPV stings.. I donno - the blocker is above, post 39 to be exact, copy and paste it.

[Crazy1_79]

look up 1one, post number 39, I pasted the blocker, it very well could be a ppv tier problem as to why the movies are gone guys, I'm off to bed peeps. good luck

[1one]

Thanks ruciz. Did not see that post. Been fast and furious.

[1one]

Thanks and have a good one crazy. Now if I can get this damn echeck paid....

[Crazy1_79]

here is the change I made to the rom10x reader to get the rev 244 past and make it gltich, it is near the bottom of the script and here is what I changed for anyone wanting to modify their scripts.

same script for 243, I only took out the 244 rev so it wouldn't think it was a rev it couldn't pop. I gambled and I won. Way down near the bottom of the winex script it has a section of script that says

If T4 = 108 or T4 = 244 or T4 = 285 Then
Sc.MsgBox("This Script does not support REV: " & T4 & "!")
CheckCard = 0
Exit Function
End If

I just took one 4 out of 244 and made it look like this
If T4 = 108 or T4 = 24 or T4 = 285 Then
Sc.MsgBox("This Script does not support REV: " & T4 & "!")
CheckCard = 0
Exit Function
End If
and the script ran it and popped it.

[Crazy1_79]

I won't be responsible for looped cams guys, I am just posting what I did, maybe it was a fluke, but it worked. god I love this blue nexus!!

[fubr]

Crazy1_79 on fire tonight, and he thinks he can sleep.

reminds me of poping rom 10's

[ruciz]

lol.. so true.. I am just reading what he did and I can't sleep :D

[Crazy1_79]

i'm back, guess what, can't sleep, I think you guys jinxed me!

[Crazy1_79]

I thought you guys would have ppv back by now.

[citrus13]

Crazy... i didn't think you could sleep...
what you did so far is amazing...

now what about the PPV??

[Ohms]

HA! Nice work Crazy. Call in sick tomorrow.

[Crazy1_79]

that's why I have to work tomorrow, called in on monday! lol

[1one]

Paid for vip and still cant figure this out. Must be to many beers. how do I find username and pass for christ sake????????

[Ohms]

If di$h dosent step up and start playing, I'll have to point a dish at bev tomorrow and start some logging of my own. Things are getting interesting arn't they. I wonder what will be the next move.

Ohms astroprojects Crazy1_79 a virtual BevMo Gift Certificate. :) Drink up! :) :) :)

[Crazy1_79]

mili will email it to you

[fubr]

1one Mili will email it to you

Crazy here is why you cant sleep.

===========================================
Glitch Success!! DE CA FE C0 FF EE
Card is Unlocked!!!
VCC = 08 (~0.147058823529412 vdc)
Glitch Delay = 3A13
Glitch type 07
===========================================

you thought it was decaf but it is full of caffiene

[1one]

I feel so violated. Must be the brockback mtn. we are watching thanks to crazy.

[Crazy1_79]

man I must of messed up somewhere along the line, is anyone else getting tv with the bin I uploaded? did I upload the wrong one or did I miss somoething, I don't have porn anymore. did they change something since I was away, cuz I had it.

[Ohms]

Did you guys see this from Mili's other thread.

"It has been confirmed. They are using Map functions within the Cam as the second layer of encryption on the control words. Unfortunately, without knowledge of those MAP functions, we will have a problem."

NOT good news at all my friends.

[1one]

If it is so bad???? State you guys point. I'm missing something big. Logged and asked last night about how this was going to cam. Almost looks like old hu bin setup for blacklisting. Ohms or someone show me.

[Ohms]

Sorry man, but like mili, I am nothing more than a parrot. I'll see what I can find out tomorrow.

[1one]

ohms,
Will sending you map functions as I know them help?

[skynet]

Gretly APPRECIATE the bin and blocker.
Have managed to lock & unlock card ok ...
Play B & numerous channels are back....F..k..yea!!
Unfortunatly no Porn, PPV or some of my locals .... Oh Well !!
But I must say (AWSOME 1ONE, Crazy1_79 & Milli) Honestly you F,ING ROCK DUDES!!!
To have this so qiuck Iam in AWWWWWWWWWWW........

Thanks dudes, Look forward to the final product...
SKY...

[mekanix]

Just a little testing,

5900 @ E548 public bin patched with the spoofed 244 blocker that was posted in this thread. Can still read and write to card... some channels movies channels some have sound but no picture, no ppv, when tring to check the system info the ird reboots tring to go to the second page....

[Crazy1_79]

after installing intercept, you lose channels. if you glitch into it, then put it back in the stream w/o a blocker you lose channels. what does everyone think is causing this?

[StreetStock]

after installing intercept, you lose channels. if you glitch into it, then put it back in the stream w/o a blocker you lose channels. what does everyone think is causing this?

The cmd 04 has changed. Spoofing rev.s will not fix your cards. We are in the same position as we were back in August!

[1one]

Okay, How about making everything look legit. no ppv strings. Then what falls?

[1one]

I have a few questions if anyone wants to think out loud.

[Crazy1_79]

let em go 1one

[Crazy1_79]

I posted a fresh vev 244 image in the downloads guys, I am back to 244, all channels working, still missing 350-400. if I glitch this card, I will lose channels. interecept must be causing this. does anyone else have a idea as to what is could cause this? I know cam specific commands are being sent to the card but I am up and running wide open at 244, no blocker, not intercept installed. If I attempt to glitch this one, I am afraid if I do, I will lose channels. I need to know why.

[bobcat2001]

There is a public fix here and over at ROM10X.

FYI,

Bobcat

[Crazy1_79]

what's the fun in that bobcat?

[Ohms]

Crazy, did that card finally update from 240 or is it another one?

[Crazy1_79]

but thanks, I was unaware of that.

[fubr]

least you guys ain't looking for a fix, your actually testing....

[Crazy1_79]

well thankx fubr, first time in awhile I've done that, I did get the fix put it on my card and now I am trying to figure out what he did, that I was missing. I ahve a feeling our work helped attributute to it though. and that makes me feel like I'm important and shit! LOL

[fubr]

It helped me I know.
I got more out of this thread than I did those "honey I shrunk the kids" ones :)

[Crazy1_79]

by the way ohms, the card finally updated, just seemed to take longer than usual.

[Crazy1_79]

no all public hack info on it ohms. no ex sub, just a dish receiver and card I converted over with the public info that was released.

[Ohms]

Interesting that it even updated.
I don't know what is going on. Too much for my little brain.

Did you see this? http://www.dssftp.com/forum/showthread.php?p=368958#post368958

[OverEasy]

Crazy with the public hack that is working is the intercept and blocker on your card? and do you have all channels eg. PPV/Porn......?

P.S CRAZY right now your the :cool: est cat I know keep up the GOOD work!!!


:D :D :D :D :D

[Crazy1_79]

yes interecept and porn and movie channels and blocker, all working now.