How to manually change new keys on the card?

[hybridge]

Hello.
I have ROM 102 Rev 105 and like everybody else... DOWN! So to change the keys first I unlock the card, read image, and save then open card image in Romexplorer and then where should I change it?
Thanks for any help.

[1one]

If your still there and want some help speak up.

[hybridge]

Yes I am still here. So can you help?

[foxx1600]

i think in "06 idea keys emm +" ull see there are 2 of them one for each set keys, split the keys between to 8 bytes lines last 2 lines in that tier

[OverEasy]

Im assuming you are useing v22 blocker w/autoroll. Open the image you wrote to the card with Romexplorer go to this line of the eeprom/Hex Edit

$9040=42A40000000000000000000000000000
................^

and change it to this

$9040=42A4E000000000000000000000000000
................^

then click save and useing N2Edit unlock your card then open the image and write it to the card put the card back in the IRD and give it time and it will roll the keys. :D

[1one]

I'm gonna try Hybridge.

[1one]

Overeasy,
Do u got this?

[foxx1600]

oh also there is a working v22 blocker in downloads apply it and it will auto roll :)

[1one]

Hybridge,
overeasy bugged out. U still need help?

[OverEasy]

sorry I took so long to post one1 but I think that should work.
thats the only difference I seen in the old and new v22 blocker.

[1one]

It will. Make sure he understands and thanks for your help.

[hybridge]

Thanks OverEasy. I been reading in the last 3 hours and some post says add E0 is not save, is it true?
And thanks foxx1600 on your earlier post I have 2 (06) IDEA keys ecm emm+ and each one of them has Key Firsy 8 Bytes and Key Second 8 bytes and both 06 IDEA keys has different keys. Which one do I need to change(First one start with E870........ and the other one start with 15FD........)
Sorry for such a stupid questions.

[hybridge]

One more thing. I have 301 013 and 510 receiver I am using V22 blocker and see lately has new version of blocker came out. Should I upgrade to new blocker?
Thanks.

[OverEasy]

Glad I could help the only difference is the E
replace 0 with the E and you have upgraded the blocker.:D

[1one]

OverEasy take the time and outline it for him step by step. Others are watching also. Make it simple for those folks also. Your help is appreciated.

[studmonkey76]

; BLOCKER V22 and BACKDOOR LOCK to 102
; USE N2EDIT BETA 7 OR HIGHER on cams
; USE N2EDIT BETA 7 ON 0801 CAMS, NOT BETA 5
; OR YOU WILL LOOP YOUR CAM!!
;
; THIS PATCH IS For
; 0001 rev 103 and/or 281 283
; 0801 rev 240
; Apply this blocker last
; Penga
; BUG TABLE
$3170=40038800301001141E00801A80000095
$3180=999000008859807500812B80A0008AB3
$3190=80C80060DB8219000000000000000000
; Backdoor lock
$81B0=00004C4F434B20495320534554000000
$81C0=00425920383231452A2042454C4F5700
$81D0=00005448452041412042595445000000
$81E0=4F4E203D203036204F4646203D203033
$81F0=00000000000000000000000000000000
$8200=0000000000000000000000000000AA00
$8210=0000000000000000001763A1CA2606CC
$8220=60ECCC7D997180CD5AC08260017008AE
$8230=07D60DFAD1017026065A2AF59D2003CC
$8240=7A99A603B790A64BB76B1864CD7C1682
$8250=1E9001CC7A952050454E47412D4E3220
; YOUR password XXXXXXXXXXXXXXXX
$8260:BAADFEEDDEADBEEF
; V22 blocker - ROLLS KEYS
$9000=718089AE0FB692D1904027145A2AF69D
$9010=7100853F92A600CC55D39D9D9D9D9D9D
$9020=7100B692A1B1260220E8858700000000
$9030=00000000000000000000000000000000
; EMM TYPE to PASS area 9040-904F
; can be made to pass what ever Emms you want
; just add them below-
; 6000 IRD EMMS 42A1A2A3A4A5A6A7A8A9
;
$9040=42A4E000000000000000000000000000
; END



$9040=42A40000000000000000000000000000
^
to
$9040=42A4E000000000000000000000000000

will allow key roll...that what u wanted to know??? or do u want step by step how to change manually?


Unlock card with password Read it Save bin.
Open with Nagra master. 2.0 Shows both keys at the bottom. Double click the addy of the key and a edit box will open. Change em there. Then relock your blocker Depending on what blocker Relock mabe at diff addys.
Save Bin write back to card with n2edit.
or
romexplorer says the keys are located at $A956 and $A916
$A916 is key 0 and $A956 is key 1 in rom explorer

[1one]

Still nine guest. Let them all gain knowledge.

[1one]

Did you get tv hybridge?

[OverEasy]

I edited my first post follow it and you will be good to go:D :D

THANKS for the push one1 I love to help but I hate to type:eek:

[1one]

Good heads up Overeasy. Keys on the keyboard seem to run together this late.