2700 working bev bin and working v28 blocker in downloads!

[Crazy1_79]

I have a bin that is confirmed working with autoroll and ppv and porn for the 2700 receivers in the download section and I also tweaked pengas blocker to work with N2edit, it was erroring out, I added the emm for new autoroll. and it is for rev 240 bins, I like that about it. I've tested both and confirm autoroll at this time and all channels open.

[Hawkeye203]

You the MAN Crazy!! Don't you sleep? Don't but don't burn yourselfe out DUDE!!

HAwk

[Satan]

Didn't get a chanch to look at this....sure hope this isn't a *E0* bypass....as that will mark the card...and there's no need for it as of now

[Crazy1_79]

i was asked to get autoroll satan, So yes it is a EO command that makes it work, I will see what is available when I get home and try to update it, as of last night when I was working, I didn't see any other option. Peeps what autroroll so I gave it to them. I don't see how adding the D0 will mark the cam but maybe you seen something I didn't. I willl check into it later.

[echobunny]

Hello,

Can anyone tell me if this bin for 2700 can be made to work with a 5800 Ird?

thanks
echobunny

[Crazy1_79]

I don't think it will echo, but there has been massive updates since this thread and a bin for you receiver can be obtained by using a blocker called ROM102-REV244for0801-V28B-BLOCKER if you do not have it, I will past it here, just add it to your existing bin for your receiver after you clean it and reapply tiers to it. then patch this to it and you are back on track. I don't reccomend patching over existing blocker on card cuz it might cause problems, this one is quite a bit different than older ones.

[echobunny]

Thanks Crazy...sorry about the PM....

yeah i have this blocker. I wrote the 3m to the bin....added the blocker. then did the Gent08 generate SK using the TSOP U7 and the bin with blocker on it...save new bin and tsop wrote the tsop to the ird. Not sure how to apply the relocker part of the blocker? Will it let me back in the card if i apply the relocker to the bin?

Also is there a way to allow rewriting keys to the card directly or is this supposed to autoroll?

Can you tell me if this sounds like i did everything correctly?


thanks so much Crazy

echobunny

[Crazy1_79]

the relocker patch is only for after you unlock your card and want to lock it again. you only use the relock patch and apply then write, card is once again locked. YOU are a little vague on the whole gendt08 part but it sounds like you got it. when patching the blocker did you cut the second part of the patch out? if you did't your box keys and ird number will change becaue of the last part of blocker the nbc dataspace part. Also, if the image of the card you are using was virgin, gendt08 will not allow you to put boxkeys on card, this is also a problem you maybe having. to see if the card patched right in gendt08 open up the program and then open JUST the card image, then click on the tsop information tab and see if it has correct box keys and ird number and what not. Do not worry about the pm. you have been a member a long time with few posts. that tells me you are a reader and a doer, not a question poster unless you are really stuck.

[echobunny]

Hello,
Well i applied this to a "cleaned bev-bin with 3m" REV240 that i got off 10X. Not sure if it was virgin. And about the blocker....it says to apply in two parts...i did this but I did apply both parts. Do i just not patch the entire second half the the patch and only apply PART1=3080-9BFF?

I opened up the 102bin in GenDT08 and it does show correct bk's and camid.

another problem i had was when i got the clean 102 from mili....it kept showing up as unknow provider. So i read somewhere to apply cleaned BEV 102 REV 240 bin to the card. So i wrote that bin to the card using n2edit 2.0 beta to it. Now the card will not unlocked and shows up as stream locked. I don't have a glitcher or unlocker at the moment so i can't try this new bin with the penga blocker. Do you think the card can be unglitched?


Thanks for your help.

echobunny

[Crazy1_79]

do not patch part 2 only what you patched. if you patch part 2 it will change cam id and boxkeys. write that to card and giver it a try. to answer your other question, this will autroll keys. no need to edit them if u don't want to

[echobunny]

another problem i had was when i got the clean 102 from mili....it kept showing up as unknow provider. So i read somewhere to apply cleaned BEV 102 REV 240 bin to the card. So i wrote that bin to the card using n2edit 2.0 beta to it. Now the card will not unlocked and shows up as stream locked. I don't have a glitcher or unlocker at the moment so i can't try this new bin with the penga blocker. Do you think the card can be unglitched?

thanks crazy

echobunny

[Crazy1_79]

do you have a copy of the bin you wrote to it? maybe it had a password in it. if you open the bin and look at the eeprom you may find it, different blockers use different places, 9070 is on addres 8260 is another place you may find it and also 9878 some common default passwords are DEADBEEFBAADF00D and AABBCCDDAABBCCDD but I have seen others too.

[Crazy1_79]

Open the bin in n2edit and click on the eeprom tab and scroll to the above address I mentioned and see if you see something like I mentioned above for passwords