ex sub 510 pvr and rom 102

[319]

please help me with directions with an unlocked ex sub rom 102 card
what is my next step ,im using a nexus unlocker
thank u
ps i have tried and messed up a 501 and 301.13 from j tagging i get ird dcu error. i hope i dont have to j tag a ex sub reciever and card

[cablecowboy]

No jtaging involved just follow these steps and your good to go.

All channels open on sub bev 102 rev 240

--------------------------------------------------------------------------------

This will open all channels on sub Bev rom102 rev240 with no ird mods.
You do not need your box keys or ird # to open channels because they are alredy on the card. Not sure if this will work with ex subs but you can test and see.


After rom102 rev 240 is glitched and intercept open. Read cam in N2edit b7 and save read. Make a copy of that cam and call it test. Do not play with original sub cam in case you need to write original eeprom back cam if needed.

Before patch

$B000=0C0100FBFB0000000000000000000000
$B010=00000000000000000000000000000000
$B020=00000000000000000000000000000000
$B030=00000000000000000000000000000000
$B040=00000000000000000000000000000000
$B050=00000000000000000000000000000000
$B060=00000000000000000000000000000000
$B070=00000000000000000000000000000000
$B080=00000000000000000000000000000000
$B090=00000000000000000000000000000000
$B0A0=00000000000000000000000000000000
$B0B0=00000000000000000000000000000000
$B0C0=00000000000000000000000000000000
$B0D0=00000000000000000000000000000000
$B0E0=00000000000000000000000000000000
$B0F0=00000000000000000000000000000000
$B100=0C0100FBFB0000000000000000000000

Write this patch for ppv should look like this when done

$B000=0000000000000C00075656070F739B96
$B010=09013000B83B3637000000010011FFFF
$B020=FF650F8C06CC70000363006236370000
$B030=0A0750180000000119007FFFFF640F8C
$B040=0701881D5061792D7065722076696577
$B050=2070726F6772616D01505056020F8C00
$B060=010C00061B1B0613D9A3160100000000
$B070=00000000000000000000000000000000
$B080=000C01007A7A00000000000000000000
$B090=00000000000000000000000000000000
$B0A0=00000000000000000000000000000000
$B0B0=00000000000000000000000000000000
$B0C0=00000000000000000000000000000000
$B0D0=00000000000000000000000000000000
$B0E0=00000000000000000000000000000000
$B0F0=00000000000000000000000000000000
$B100=0C0100FBFB0000000000000000000000

Done with ppv’s

Now we want to patch all other channels so they are open.

Should look like this before all channels patch

$A5F0=0C000728280713C55CF8090111001776
$A600=1401A8BE01EA006613DE2FCE6113C500
$A610=00623638A8BE0A021C90FF00FF0C0007

write this patch below for all other channels. Should look like this when done

$A5F0=0C 00 07 28 28 07 13 07 8D 5C 09 01 11 00 1F 76
$A600=14 11 A8 BE 00 01 00 66 13 6C 34 7E 61 13 07 00
$A610=00 62 36 38 A8 BE 0A 7F FF 90 FF 00 FF

run blocker Version8

You may have to unplug receiver and plug back in.

Test at own risk. Has been tested and working on ROM102 Rev 240 Bev.

[mrscig]

1) Read the virgin image of the Ex-subed card & save it to your hard drive.

2) Make a tier patch using DT Works or program of your choice.

3) Open virgin card image using n2Edit beta 7 or 9.

4) Patch tiers & blocker Patches to this virgin image & write it to your card.

5) Save a copy of this image for future reference.

I hope this helps!

[319]

does it matter what blocker i use after unlocking my card is at rev 103
this is for sat 119,and 110
can i use nagramaster ?