loader//unlocker HELP

[dank]

when trying to flash loader and unlocker it says trying to flash loader with nd13

hex files loaded
initializing
initialized
syncing
failed:could not find active atmel!
complete


then when I try to unlock card it says need to run nd13
Dank

[studmonkey76]

well it would help if we knew what unlocker your trying to flash. im gonna assume its a nexus white....

use dips 1 and 6 on

start up xp atmel programer
right click anywhere on the gray part in xp atmel programer
set timing to 60 5 1
then try programming with newd13

[dank]

ya nexus white....and nexus white....
iso programmer

[dakazman]

You may also know this but place switch to U,
Then put it back to P for glitching.

Have the same problem sometimes,use XPAtmel for loading.
sometimes it just needs to cam reseated.

DaKaZman

[boobookitty]

I had one I did not see switch u and p?

[dakazman]

Modded Nexus - Clear not white, but close.
See pix

dakazman

[dank]

Why cant I flash my nexus loader and unlocker it says can not open dynamic driver (when anilyze)
when try tp (flash) unhown comm running windows xp tried on pc and laptop tried on another computer same whats up with this i even tried the password one xp amtel

[dakazman]

I read you have a white nexus I was going to sugest a non null cable, but you did get it to be recognized once that I know of.
Have you tried UFP16 to try to load flash?
Dakazman

[dank]

What is UFP16 and were do I get it
Dank

[studmonkey76]

are u using a usb to serial connector? if so thats probally your problem...i tried and tried using a usb to serial connector and kept getting the dynamic driver error....bought a pci card with both serial and parellel connections and no longer have that problem

[dank]

I also bought a pci card with both serial and parellel connections
Do i have to set up the new pci card

[dank]

After installing new pci card and loading drivers Computer says ready to use
Still the same (unknown com) when trying to flash and (dynamic driver error)when trying to anilyze

[woods]

if you added a card its com port is probally 3=4 or 2 and 3. make sure you are using the proper com port in xpatmel or it will never work

woods

[dank]

Ya, I looked in propertys and saw which number was on each com
I clicked on those coms when I tried to flash and still says cannot open dynamic driver (when anilyze)
when try to (flash) unhown comm

[studmonkey76]

somewhere there are settings for the ports....i dont remember where....but i had to go in and change my port settings in i believe it was device manager....i will see if i can find it

[dakazman]

What is UFP16 and were do I get it
Dank
UFP - Unlooper Flash Programmer 1.6 for Win9x/ME/2000/NT/XP

Public dnlds - Misc Files #15 - Just checked.

Dakazman

[sojoemperador]

are u using a usb to serial connector? if so thats probally your problem...i tried and tried using a usb to serial connector and kept getting the dynamic driver error....bought a pci card with both serial and parellel connections and no longer have that problem

I just got the "dynamic driver" error with my onboard COM1: mobo port. Downloaded something called "Atmel Driver" and now it seems to work fine.

[Videodope]

any idea where i could find that file???

[mohammadi]

i tried to download file onmy view sat extreme, but it is not downloading , wat should i do?

[tv2k]

i tried to download file onmy view sat extreme, but it is not downloading , wat should i do?

this is consider you hijacked the thread, start your quesition on your own thread next time. Turn off your viewsat, then click on download, turn it back on once the software starts to run, it will flash it for you.