102rev103 not unlocking

[kellie]

102 rev 103
using script nwd
set pot at 2.2k
still no go

[yordan40]

102 rev 103
using script nwd
set pot at 2.2k
still no go


That is too much ohms.. You need to set you pot to read close to 21 ohms.

[mopar611]

That is too much ohms.. You need to set you pot to read close to 21 ohms.


2.2k...

Looks right to me..

[dickched]

C'mon Mopar... 200ohms is more like it. 2.2k will probably loop it. It's not a Rom10! Kellie , you need to use the search button and look for a white nexus howto guide.

DH

[skinerd]

102 rev 103 opens easily with a Modded T911, NEVER looped one with it, can't say the same for a Mik N2 or Orange nexus tho.
I use the AOFF auto vcc script for rev 103 and 105, has always worked.

[iknownothing]

Skinerd,

I need help with unlocking a couple of rev 103s. You mentioned using a modded T911... could you please tell me what exactly I need. I was looking at Mikobu or Nexus but I guess I can buy a modded T911 for much cheaper?

-iknownothing



(http://www.dssftp.com/forum/member.php?u=1911)

[bartman0916]

Iknownothing please dont hijack the thread start your own in the appropriate area.
I use a T-911 for mine. newd 13 flash and 3 down only with pot at around 60 ohms pops them in under 5 min usually. everybodys is a bit different though.

[Hippie Hackers]

102 rev 103 opens easily with a Modded T911, NEVER looped one with it, can't say the same for a Mik N2 or Orange nexus tho.
I use the AOFF auto vcc script for rev 103 and 105, has always worked.


I keep reading about the AOFF auto vcc script. where can I find it. I've checked the downloads and did not find it. I even used the search and no luck. can you post a link please