Rev 244 Unknown Provider

[Me777]

I have a bell rom 102 that i effed up in n2edit it still has vaild atr but it is at rev 244 and has unknown provider does anyone have a script that can fix this or mili can u fix it ?

[toyman200028]

Unlock it with your password & write a clean image back to it.

[bigbronco]

Not trying to jack this thread but I have the same problem. I have rom 102 rev 106 unlockedbut can't write to it because of Unknown provider. Where do I get a clean image? the one I have saved Says Unknown provider. Thanks :)

[toyman200028]

Not trying to jack this thread but I have the same problem. I have rom 102 rev 106 unlockedbut can't write to it because of Unknown provider. Where do I get a clean image? the one I have saved Says Unknown provider. Thanks :)
Download any all in one image, open it & clean code space.

[Texas Trophy]

Not trying to jack this thread but I have the same problem. I have rom 102 rev 106 unlockedbut can't write to it because of Unknown provider. Where do I get a clean image? the one I have saved Says Unknown provider. Thanks :)

If it is unlocked and you can read it then clean the codespace 3 times and write it back to the card. Also save the clean image.

[bigbronco]

This is what I get when I clean codespace (replaced ATR with XXX's)

ATR: XX XX XX XX XX XX etc...
CAM Type: ROM102 Rev106
Setting IFS
Temporary Backdoor Patch is installed.
Provider: Unknown
Reading Card image...
Card Image Read Successfully. (Retries: 7)
Total Read Time: 00:00:15.4062500
No clean image found for this Card Image!
No clean image found for this Card Image!
:rolleyes:

[Me777]

hummm so much for not jacking my thread i didnt even get an anwser..... :mad:

[bigbronco]

Really sorry, I thought toyman200028 (http://www.dssftp.com/forum/member.php?u=28580)
answered your question. Just a little frustrated. No I didn't. Sorry Again.
(http://www.dssftp.com/forum/member.php?u=28580)

[bigbronco]

Me777 maybe this will help.
Mili posted this in someone eleses thread but I don't know what to do with it. Unlocker? ISO?

BenDover
Write the original BIN that you have saved for this card. Do a Live Update
and try again.
This error is caused by an unknown provider card.
Alternatively the attached will (may?) unlock cards that have the "Unknown Provider" problem. So far, I've unlocked 2 of those and 1 that had some different problem. For that one I had to use the BugResetter program first, which fixed one problem, then the softloop glitcher was able to unlock it. Rename the 101_102_Softloop_Glitcher.txt file to 101_102_Softloop_Glitcher.zip after you get the
attachement.

[spanga]

ME777, at what stage are you getting unknown provider.....after glitching or after applying blocker?.....if after applying blocker and you can't get back in using the password, it may be your iso... if it is an older one, some don't seem to work 100% gettiing back in with the new blockers, even though they read and wrote to the cam before the blocker....hope this helps

[Crazy1_79]

I am going to say this one more time, Ater you unlock a rev 106,107,208 or rev 244 you will have unkown provider. the unlocking script causes this and is completely normal. However, if you cannot read the card, I suggest you get n2edit 2.3 sometimtes something happens during unlocking and older n2edits won't read after unlocking, but you can still read them. the new n2edit address' this problem and usually you can read them with that program. NOw if you have unknown provider because of a bad write. there are unknown provider fixes out there. goto downloads and look for them. depending on the rev of the card is how you determine which script you need. If tht don't fix it. you card is fubared. and put it aside.

[Crazy1_79]

Big bronco. open a image and write it to the card. you problem will be solved. forget about trying to clean it.

[spanga]

respectfully, crazy.1....i 've only opened one 244 and it never went unknown provider until i applied the blocker......changing iso got me password back in......not to dispute your info at all....just mentioning what may help if all else fails (which did in my case)......

[Crazy1_79]

Ok Spanga, it is early. no disrespect taken. sometimes I am wrong. (mark it in your calender) LOL. I know I have seen 244 go unknown provider. and the other revs. maybe you got lucky.

[Me777]

this is after i wrote an a..i.o image and ive been told i messed it up and no one can fix it but is there any way to glitch back in this cam so i can write an image ? ?

[bigbronco]

Ok guys, I found this on another site and it worked like a charm fast and easy.

Fix Unknown Provider Rom102 and camless Open bin in N2E

At address 30C0 change first two bytes from BF BF to as follows, to reset datapointers:

D*sh is A7 BF
B*v is 9C BF

You will then have provider back and still have sub dump info.




Camless for D*ish is A5BF......

Thanks for all the help, BB
P.S. I hope you get yours up Me777

[Me777]

i cant write an image or read. . . i need to glitch it somehow

[spanga]

ME777.....just to make sure you've covered all the preliminary bases before you start glitching and possibly looping that cam.....the all in one you used has a password to get back into the cam....did you change it.?...if not try the default one described in the all in one script or read me.......i use ne2beta 9, so its click on tools, click on unlock cam, enter password into the space there and click on unlock cam....when you try that what do you see?.....sorry if you've already done all that but we need somewhere to start from to try and help....

[Me777]

thanks i appericate the help and yes i have tried all of that and i have been told elsewhere that the card needs to be glitched to restore provider... so i can write the aio agian ...

[spanga]

what are you using for an iso?

[spanga]

actually now that i think of it the new n2e allows reading/writing with a loader now....you might try passwording in that way before glitching....flash loader with nds i believe......and no, i will not recommend any script to try glitching back into that cam....i'll leave that to those that have been successful at it that way....i couldn't stand hearing back that something that i mention looped a cam....i'd have to send you one of mine (and that ain't gonna happen...lol)....i hate to keep harping on it but i had almost exactly the same symptoms after a botched blocker write and it turned out to be my iso that wasn't letting me back in.....took me three weeks to figure that out start to finish......hate to see you shelf a pefectly good cam if that's all it is........then again like crazy1 said, maybe i just got lucky.....

[Me777]

i cant get inside the cam in n2edit at all it jus says it couldnt read it and i cant unlock it so .... any ideas .... and lol dont worry i wouldnt ask for a card just help would be great

[bjay]

I had a simular problem, reading a previously "opened" 102 . In short ,my iso had a 5 v power supply. I got the idea to use an adjustable power supply set to 9v, and with the 1st try I was able to read the card and save the image-- amen --Bjay