cant read rom 102 rev103 after i glitched it

[altinem]

i cant read rom 102 rev 103 with iso after i glitched it.here is the result screen..

Let the 102 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 033C
VCC = 28

-+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+--+-+-
TX Data : A1
===========================================
Glitch Success!! A0FF-INTERCEPT IS ON
BootLoader 6F 00 RSP Received!!
VCC = 0A (~0.186274509803922 vdc)
Glitch Delay = 033C
Glitch type 06
===========================================

Script D:\20gbHDD\nagra2\rom102\newRom102Unlocker\new.xvb Transmission Completed

nedit2 beta 9 says its still locked.

[altinem]

ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 39 6E
CAM Type: ROM102 Rev103
Provider: Dish Network
Reading Card Image...
Failed to read card.
Unlocking Card...
Unlock Failed!
Unlocking Card...
Unlock Failed!

[Bubba Lewey]

This sometimes happens! Glitch again until it says it has popped it again and try to read it until you do get a good read. It might help to adjust your voltage once it glitches in so you can get that good read. I have run into trouble leaving it on glitch setting while trying to read it. This might not be the case with your unlooper / glitcher though!

[snappy69]

I have the same type problem. I have unlocked 2 cards in NagraMaster 2.0 and have read the bin off them.(so they should be unlocked if I got the bin off of them, right?) Then I go to N2edit2.5 and put card in my ISO, I try to read card and it gives me a good ATR, but It wont let me read the card???????????? Why can I read the card in nagramaster with my glitcher and not in N2edit with my ISO.

I am out of ideas, PLEASE ANY SUGGESTIONS

[mopar611]

I have the same type problem. I have unlocked 2 cards in NagraMaster 2.0 and have read the bin off them.(so they should be unlocked if I got the bin off of them, right?) Then I go to N2edit2.5 and put card in my ISO, I try to read card and it gives me a good ATR, but It wont let me read the card???????????? Why can I read the card in nagramaster with my glitcher and not in N2edit with my ISO.

I am out of ideas, PLEASE ANY SUGGESTIONS

Looks like you marked your card...

Mopar

[mopar611]

ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 39 6E
CAM Type: ROM102 Rev103
Provider: Dish Network
Reading Card Image...
Failed to read card.
Unlocking Card...
Unlock Failed!
Unlocking Card...
Unlock Failed! You either got a false hit or marked your card...

Try writing to the card.. If it writes, it marked.. If not, its a false hit..

Mopar

[snappy69]

how did I mark my cards?

ANd I am sorry, what do you mean by false hits

[mopar611]

how did I mark my cards?

ANd I am sorry, what do you mean by false hits


Your card gets marked by glitching it.. Just the way it is..

The false hit thing is when a script hooks a bug but not the right one..
Then it gives you open cam but its not open..

I am not a coder so dont know all the technical terms but this should give
you a good idea..

Mopar

[mopar611]

Try writing to the card..

[snappy69]

THis is waht I get in n2edit:
ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 52 65 76 31 30 33 64
CAM Type: ROM102 Rev103
Provider: Dish Network
Reading Card Image...
Failed to read card
Failed to write card.

[snappy69]

Also if my card is marked, WHy can I read it in NagraMAster2.0 ??

[snappy69]

anyone??

[altinem]

instead of reading after glitch .i wrote a new bin with n2edit beta 7.now i can read and write the card.

[gourmetboy]

use 3.57 crystal of your iso to read and write , ,post your results, worked for me

[snappy69]

altinem,
I will give that a shot!

grourmetboy,
I am using a 3.6864, I thought 3.57 did not work well with Charles. But hey! it is called testing.Right what hte heck!

thanks for the replies

[r&s]

so if a card is marked, a 102 ,what can be written to it so you car read it and program it

[udntcme]

try the "newest" Nagraedit.

[udntcme]

Here is i "tip" I found that work's switch between nagrmaster or the rom utility (Loader) and nagraedit...(iso) ...if I don't get atr or response from nagra master I switch to nagraedit..(The new one) and I get a reset atr back again....