301-13 flash problem

[1iwilly]

hello to all
just as i was making progress i'm back to square one
i was trying to modified my tso on my 301-13 single tso erase flash
when i try to write mod tso ird has no power i've been trying using wall to reflash original tso wall shows it did unplug ird then plug back in still no light not even a blink does anybody has a good tso i can try?? running out of ideas
thanks

[smilingjack]

IT has power, it just Say's it don't. Bad flashes will sometime do the. Feel the transform, the will be warm (power)

You relay need a power strip to do the, pulling is plug-un and too long.

[1iwilly]

yes it is warm i'm using wall erase flash multiple times then try to reflash with wall
once it is done i unplug power for 5 seconds the re-plug it but still no blink light
to confirm ??

[skinerd]

yes it is warm i'm using wall erase flash multiple times then try to reflash with wall
once it is done i unplug power for 5 seconds the re-plug it but still no blink light
to confirm ??

Using Wall for a -013?? Unles you really know how to use Wall for that you will not have much luck, just use Jkeys you'll have better luck.
You modded you flash, how?? I mean what did you do to it.

[1iwilly]

i erase the flash so i could write the new one i made with the ird#and boxkeys for the 3m i want to use but jkeys shows errors becase ird is not powering up

[smilingjack]

Use J-Keys and fleash the original back in it will state working again

[skinerd]

i erase the flash so i could write the new one i made with the ird#and boxkeys for the 3m i want to use but jkeys shows errors becase ird is not powering up


If flashed properly, the receiver weill not show signs of power, if R79 is grounded, then it is in link mode and appears dead, except it wil jtag fine.

I believe we have here another case of "I don't have a clue as to what I'm doing, but that ain't gonna stop me".

Know what all that means?? Know what R79 does? know what link mode is?.......Sure don't sound like it.
Read, search, get stuck and ask, don't just assume and jump right in.

[1iwilly]

If flashed properly, the receiver weill not show signs of power, if R79 is grounded, then it is in link mode and appears dead, except it wil jtag fine.
I believe we have here another case of "I don't have a clue as to what I'm doing, but that ain't gonna stop me".
Know what all that means?? Know what R79 does? know what link mode is?.......Sure don't sound like it.
Read, search, get stuck and ask, don't just assume and jump right in.


no it is not in link mode i was able to jkey it save the tso read all the info fine
then i erase the flash once it erase i couldn't get back into the ird with jkeys
it would not detect the ird no matter what i did thats when i started using wall
but no luck r79 is not grounded.i'll put it to the side for when i have more time to play with it thanks for the imput