PDA

View Full Version : Dish 300 & sat 129?


stinkfist
07-23-2006, 03:22 AM
Hello , can you use a dish 300 to get sat 129? I called Dishnetwork & they say no. But I have read different answers everywhere getting confused. I know for sure you can get 61.5 with dish 300 & I have read that 129 is a mirror of 61.5 what ever that means. Thanks:D

DL410
07-23-2006, 05:42 AM
Yes you can.

stinkfist
07-23-2006, 05:50 AM
Does it have to be a Dish pro LNB with my dish 300? I have got 61.5 with it. Thanks:D :)

Raddude
07-23-2006, 07:19 AM
Either DP or Legacy will work. You have to match them, can't mix the two.

stinkfist
07-23-2006, 07:22 AM
Thanks, having a hard time finding the azimuth & elevation for zip code 98908 sat 129. All of my ird's don't have the 129 option just 61.5 ,148,110,119,121. Is the a guide for 129 somewhere? Thanks:D :)

DL410
07-23-2006, 06:04 PM
If your IRD's dont have the 129 on the list you may have another problem. You may need a newer IRD or a software upgrade. What IRD's do you have?

Receivers NOT compatible with DISH 500+ or DISH 1000+: (*no 129/118.7 support) 1000, 2000, 3000, 4000, 5000, JVC-IRR, DISHPlayer 7100/7200

DL410
07-23-2006, 06:23 PM
98909
AZ 160
EL 36
SK 89
this should get you close and tweak from there.

stinkfist
07-23-2006, 09:20 PM
Great thanks. I have three 301.013's one 301.010 a 510 , 501( Bev) ,721, and 625 and soon a 811. :D :)

old school
07-23-2006, 09:51 PM
Great thanks. I have three 301.013's one 301.010 a 510 , 501( Bev) ,721, and 625 and soon a 811. :D :)

9 receivers? Damn! A receiver in the bathroom too? :D

stinkfist
07-23-2006, 10:04 PM
I have a five bedroom house. Plus I have my 501(bev) 510(dish) & 625 hooked to my plasma in the living room. I got most at flee markets and yard sales so I don't have to much invested just alot of time. I am just getting into the HD thing since I got my plasma's.:D :)

DL410
07-24-2006, 12:37 AM
Every IRD you listed should have the 129 in the menu, on the next screen CHECK SWITCH if you have a check box for SUPERDISH and ALTERNATE put a check in each of those and see if it shows up in the sat menu.
What are you using for LNB's and switches?

stinkfist
07-24-2006, 12:45 AM
I have two DP quad lnb dish 500's for dish and one legacy quad for Bev. I have DP21 switch I am going to try with my dish 300 when I find 129. I will look again on the 301 to see if I can get the 129 info. thanks:D :)

OTTER
07-28-2006, 03:08 AM
Can someone help me find the angle and azimuth using a Dish 300 for the 129 bird from Toronto, Canda??

Thanks guys

DL410
07-28-2006, 06:42 AM
Dont mix the DP and Legacy LNB's