Does anyone have cardsharing up with Mili's programmers?

[zag1958]

Like the title says does anyone have cardsharing working and is using one of Milis' ISO programmers? I have spent the last two days trying to get it working but cannot get past the Checksum WRONG error that I get from the server. The card is programmed fine and it works with no issues in my IRD. All channels are open inculding PPV and Porn but I just cannot get the card to work with cardsharing.

[roadrunnericu]

i have the iso program in the pic above also. I hope it makes you feel a little better to know your farther than I am. I cant seem to get my dishbox to spit out its jtag information. If I am not missing something it sure sux needing a IRD to get the card set up when your not going to use a IRD with the card anyway. I tried putting in the current keys with nagramaster but when I look at the open plugin when it is in use i get error "reason No Keys".

There were not as many dvbers' as ftaers' and very few of the dvbers' are even attempting this cardsharing in this manner so help in not real abundant, We need to start a forum thread with the proper title to bring us that are going down this road to the table together as these sites are intended to do. These kind of sites are being loaded recently with dvbers' and ftaers' now needing to learn the plastic side of the craft to salvage there cardless systems and what an invasion of newbies we must seem to be. Lets just hope that we find help from those who found the free advice that they once needed.

Good Job on being able to watch TV again on your IRD .

[GeordieCA]

Yes. Running on FC4.

Here's the top of config:
<readers name="Card Readers">
<device>
<name>phoenix</name>
<type>Phoenix</type>
<node>/dev/ttyS0</node>
<mhz>357</mhz> <!-- or 357 -->
<parity>odd</parity>
<export>yes</export>
<enabled>yes</enabled>

Here's some stdout:
[ 19:25:09 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 19:25:09 ] [ Phoenix ] Opening device /dev/ttyS0
[ 19:25:09 ] [ Phoenix ] Setting Parity to: ODD
[ 19:25:09 ] [ Phoenix ] Setting Baud to standard 9600
[ 19:25:09 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 19:25:10 ] [ Loader ] Init Nagra card
[ 19:25:10 ] [ Phoenix ] Setting Parity to: ODD
[ 19:25:10 ] [ Phoenix ] Setting Baud to custom 111600
[ 19:25:10 ] [ Nagra ] -> card
[ 19:25:10 ] [ Nagra ] <- card
[ 19:25:10 ] [ Nagra ] Nagra 2 Card detected
[ 19:25:10 ] [ Nagra ] -> card
.
.
.
[ 19:25:11 ] [ Nagra ] SESSION key =
[ 19:25:11 ] [ DEBUG ] F6 F1 52 00 DF 3B D3 3C 00 4E 3A EA 5A 58 9A ED
[ 19:25:11 ] [ Nagra ] -> card
[ 19:25:11 ] [ Nagra ] <- card
[ 19:25:11 ] [ Loader ] Card 1801 on port /dev/ttyS0 ready
[ 19:25:11 ] [ Loader ] Starting Newcamd Server on port 15050
[ 19:25:11 ] [ Loader ] Starting Radegast Server on port 10002
[ 19:25:11 ] [ SockSrv ] Server thread started
[ 19:25:11 ] [ ECM queue /dev/ttyS0 ] Starting...

[GeordieCA]

I cant seem to get my dishbox to spit out its jtag information. If I am not missing something

Is your card open?
If so just write a public image to it.
The card sharing servers seem to have the public RSA & box keys hardcoded. You need to put an image on the card that WOULD work with an IRD with those box keys. There is no reason why you actually have to ever put it in an IRD.

[Starfury]

I also have milli's ISO reader
I have a ROM 102 with the HackKids 3M w/ codespace blocker
it works fine in a 301.010 that I have and has the updated keys.

I am using Mytheatre
I have the NewCS 1.17 Release candidate 10 and WinCSC 1.20 Build 2483.

I am getting video from the cardsharing, but not for to long. It works for about 10 minutes to a half hour and then I get checksum errors. If I close out Mytheatre, and NewCS, I can get it working again until the next time I get checksum errors. I have tried WinCSC and also the CSC.dll that was meant to fix the Nexus DVB card errors, and both of those do the same things. I have changed the com port speed(s) and some other settings but I do not get video for more than about a half an hour.

If anyone has any thoughts please let me know.... as I am very frustrated. Thank you!

[roadrunnericu]

what version of mytheatre are you running and is it registered or patched?

for starters increase the size of your bufferr in MT

to properly trouble shoot you should set up progdvb or another similar to see if it is your MT

[BigSwifty]

I too saw similar results with cardsharing and auxserver/EmuNation. I have gone back to plastic in an IRD, but have recently read that those issues may be solved by bringing up Task Mangler (Ctrl+Shift+Esc) right clicking on myTheatre, selecting Set Affinity and then selecting only one CPU on dual core CPU's.

Sorry only have 1 card so can't confirm this, but worth giving it a shot. Good Luck!