Autoroll Keychange

[SURFGUY]

I was in the middle of making some changes to my yellow rom 102 card, and can't get past the 005 Nag "NOT AUTHORIZED TO VIEW OR PURCHASE THIS CHANNEL, KEY UP OR DOWN OR WAIT".
What can I do now?
First off, I programmed the card with a working flash , with tiers, blocker & autoroll.
This flash was not using my locals, so I used DT TIERWORKS to rewrite the BIN with my timezone & locals.
The things that it changed for me gave me my locals and my timezone o.k. but now I couldn't get the PPV or Porn channels, as before.
Next I again used tierworks and tried to add back the missing PPV.
Now the Nag 005 comes on screen and will not go away, and I left it on for hours!
I then went back and reflashed the card with the earlier BIN with my first change that at least got me everything except the PPV's. Same NAG 005.
Next, I reflashed my card with the original BIN that worked, even if it didn't have my locals or timezone. Same result --- NAG 005!!!

WTF!!!

What am I doing wrong??? I originally flashed the card with N2 EDIT BETA 9 and the the BIN onto a dealer unlocked card, and everything worked out fine. Next, I unlocked the card with the same progy, cleaned the codespace, and made my first change(with locals & timezone which worked fine). Then unlocked again, and rewrote the PPV strings (got nag 005). Next rewrote the card with the first change after cleaning the codespace(got nag 005). Next wrote the original cardflash after cleaning the codespace(got the nag 005).

Is it possible that cleaning the codespace is leaving some of the earlier programming on the card, and that this is iterfering with the reflash?

Should I be using a different program altogether, for writing to the card? or a different one for cleaning the card???

Any help is desparately needed!!!

Thanks,
SURFGUY:confused:

[helpless5]

There is most likly someone else more knowledgable but you might try taking original bin then use tierworks to set all tiers, clean code space two or three times and rewrite to card. in other works kind of start from scratch in case somewhere along yopur process gotr corrupted.
only my two cents worth.

[maxheadroom]

it's not your programming. Today is Wednsday channels are disappearing. the blocker needs to be changed. you need to look for a fix. I doing that right now.

[ArmiTaPoot]

There is nothing wrong with your steps. It is just that there is a new key, and the autokey feature won't roll. So, you need to enter the key manually and write to the card.

There a new key posted by Dog Breath somewhere in the forum.

[SURFGUY]

Thanks to all who helped!
Sure enough their was nothing wrong with my programming steps!
I was doing all of this in the middle of a key change, and my autoroll didn't work.
I put in the new keys and everything is working great!!!

Here's the new keys for anyone whoo needs them:
KEY 86 --- 0F C5 21 D1 B6 04 8E 9E 90 CC D3 12 58 E4 B6 9B
KEY 96 --- 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC

Good luck to all,

SURFGUY:D

[ruciz]

now the real fun begins :)

[CYCO]

Thanks to all who helped!
Sure enough their was nothing wrong with my programming steps!
I was doing all of this in the middle of a key change, and my autoroll didn't work.
I put in the new keys and everything is working great!!!

Here's the new keys for anyone whoo needs them:
KEY 86 --- 0F C5 21 D1 B6 04 8E 9E 90 CC D3 12 58 E4 B6 9B
KEY 96 --- 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC

Good luck to all,

SURFGUY:D




What address are keys located at on rom102 bin. Thanks

[Trapofmind]

I had that happen to me as well: you're programing "something", you get a nag, you know you're doing it right but still nag, then you realize that in the time it took you to set "something" up to be programed the keys were changed.

Very frustrating, and down right rude! Charlie ought to inform us before he does these things.

[SURFGUY]

What address are keys located at on rom102 bin. Thanks

I didn't worry about what the address was. Just used DT-TIERWORKS. Clicked on the picture of the key at the top, and on the pop-up window - typed in the latest keys - then clcked on "MODIFY BIN" - then selected my BIN flash where I had saved it, and that progy automatically edits the file and saves a backup file next to it. From there, just clean your card and rewrite with the new edited BIN. And you have still got your old BIN file just in case yoiu should want it!
Brilliant guy - the one who wrote that Program!!!

LOL

SURFGUY:D