Which blocker, and how to apply it? (Rom102)

[Fro66er]

Ok, I have locked my self out of 2 cards so far using codespace blocker V9. What the heck am I doing wrong?

Here is what I'm doing:
Take a virgin cleaned codespace image at rev 103 (cleaned codespace 3 times)
Use GenDT08 to get the IRD and card married (no blocker yet!)
Open DT tier works, select my tiers/date/etc, then open the virgin cleaned DT08 image and let DT tierworks add the tiers.
Open N2Edit 2.5 and open the image with tiers, and DT08. Click on patch, and add c0d3sP4c3 Rom102 Blocker AutoLock
Write the card.

I changed the default password, but N2Edit or NagraMaster or MR Untimate will not unlock the card, and it will not read/write now.

I do not understand the "Auto Lock" feature in c0d3sP4c3 Rom102 Blocker and how to disable it. Here is where I get confused on how do disable autolock (c/p from c0d3sP4c3 Rom102 Blocker) :
; ------------------------------------
; If you want to lock it manually
; change the 00 below to 01 otherwise
; the blocker will lock itself
; automatically when inserted in the
; receiver.
; 00 = Unlocked - Autolock active.
: 01 = Locked - Manually Locked. <---Why does this have a ":", not a ";"
; ------------------------------------
$9489100 <------------------------------Do I change this 00 to 01????
; ------------------------------------
; Replace DEADBEEFBAADF00D below to
; your personal password of choice.
; ------------------------------------
$948A:ACDC9876ACDC5432
; ------------------------------------

End of c/p

Can anyone recommend a blocker, or how the heck do I apply codespace blocker correctly so I can unlock the card with my own password? Should I use a different program to load the card other than N2Edit?

Any help would be greatly appreciated. I've gotten pretty good at unlocking, so I'm going to answer some rev103 problems other peeps are having, while I wait for some advise from you all.

TV would be nice to have again:cool:

[Grizz49]

When you changed the password did you use true "hex" numbers 0--9 A--F

[Fro66er]

Yep, used ACDC9876ACDC5432

[Fro66er]

Got it working.

I took the cleaned image, and added Penga blocker V28 in MR Ultimate. Then ran the image through DT Tierworks to add the tiers. Wrote the image with MR ultimate.

I guess the trick was to add the blocker first to the cleaned image, then add tiers.

Ahhh TV

[Grizz49]

I dunno. I have been using c0d3sP4c3 blockers since they first came out, and have always put it on last.

[t160hq]

The reason your having trouble is you can only unlock
after applying with the c0d3sP4c3 Backdoor Utility included
with the c0d3sP4c3 blocker v11.0p which is the one you
should be using for Di$h. The B3v version is v11.1p. And it
must be applied with either N2edit or Nagra Edit v5.0. No
other N2 read write software is supported.

The new utility included gives you the ability to relock the card
without rewriting it and it also allows you to get current keys
without even unlocking the card!

All this is in the readme. But, as it usually goes this stuff
gets chopped out by some as the information is passed
along.

Yours has been modified. By who I don't know. The orginal
has the line in question written as:
; 00 = Unlocked - Autolock active.
; 01 = Locked - Manually Locked.
; ------------------------------------
$961F100

So I'm guessing the support files were not included either. Did
you get that from the download area here?

t160hq

[Fro66er]

t160HQ, thanks for the clafifiaction. Starting to think my download was corrupt somehow. Why it had a : rather and a ; might be screwing things up as well. I double checked the original Rar, and it contains the ":"

Got the darn thing programmed now. Thanks for all your help guys!! really appreciated it!!