Ecm Fix

[gordonc]

Well I was using cemu on a 2700 and a 3100 ird with no problems for over a year and what ya no the pricks hit me :asshole2:
I flashed my ird and put a valid cam# in cemu and have been up and running for almost a day now with no nags :p
I think the ecm is hitting all ird not using a valid cam# becuse everyone I no using a valid cam# was not hit.
so to all out there running a emmu try a valid cam and you should be fine.
And thankyou Bell for giving me something to do I was getting board :moon:

[rebeccajean]

can anyone tell me where to get j keys 2.9.9 or the one with 3100 software i cant get into mine wit versin 2

[deafdarkman]

Well I was using cemu on a 2700 and a 3100 ird with no problems for over a year and what ya no the pricks hit me :asshole2:
I flashed my ird and put a valid cam# in cemu and have been up and running for almost a day now with no nags :p
I think the ecm is hitting all ird not using a valid cam# becuse everyone I no using a valid cam# was not hit.
so to all out there running a emmu try a valid cam and you should be fine.
And thankyou Bell for giving me something to do I was getting board :moon:


valid cam ,like white card with number , copy S0-xxxxxxx-xx then paste in camid line from cemu.ini , right? let me know

[Chapster99]

Yes. Just use any CAM # that you know is subbed. If you are not subbed, ask your buddy for his CAM # (it's gotta be a subbed CAM).

[deafdarkman]

just type together without (-) like S0000000000000 ????

[Chapster99]

S + all thos zero's is not a valid CAM ID.

rckhrd510, I don't know what you mean...??

[deafdarkman]

I mean S0-00000000-00 or S000000000000 , I know that all zero but just show you example, , I have sub number , I just want to make sure , because I had been hit 3 times while I was trying to test for my valid card , that why ,

[Chapster99]

Type in the same # as shown on card...except the last 2 (-XX). Those will be actually shown as -XX.

I'm not testing EMU, so I don't know if you need to enter CAM # in hex or not...

[deafdarkman]

like that in cemu.ini

CamId=S0746534278-XX ?

or change from 746534278 to hex

CamId=2C7F3586 ?

right?

[Canuk]

hey.... is that a valid subbed cam id HE HE ;-)

BTW you are correct in your hex conversion. After that you can enter in the HEX number into your cemu.ini file under Camid={hex number}

[deafdarkman]

this is not vaild number I just play with number for example , I am not stupid , I know never show them my real valid ok Thank Canuk, you sure it will not get hit by ecm ,

hey.... is that a valid subbed cam id HE HE ;-)

BTW you are correct in your hex conversion. After that you can enter in the HEX number into your cemu.ini file under Camid={hex number}

[Darnat]

Ok guys ...just to clarify things here...first off makw sure if your using CEMU that the legit cam id you will use will be off a Rom3,not Rom 10...all you need to do is open the cemu-ini and edit a valid card # in the cam id space...but only the middle 8 #'s....SXX-1234 5678-XX.
Convert these Numbers to hex...ie 0BC614E.....THIS WILL WORK!

[deafdarkman]

like that

camid=xxxx xxxx in cemu.ini

you sure , because I am complain if again hit by ecm

[Darnat]

I'm sure.....Haven't been hit yet(touch wood)....been running cemu for over 2 yrs now.....

[Darnat]

like that

camid=xxxx xxxx in cemu.ini

you sure , because I am complain if again hit by ecm
Make sure they are converted to Hex........

[deafdarkman]

Sxx Xxxx Xxxx Xx
SX* **** **** XX
9 Number To Hex?

[Chapster99]

Im using atmega with 18x2 never subscribed rom10 cam id and 3100 with e337 firmware for 14 hours and no ecm get ecmed when I use my unsubscribed rom 3 cam id though?

E337? You must have lost a bunch of channels. FYI...seems E431 & E432 are safe from the current ECM activities. No loss of channels either...

[Chapster99]

Sxx Xxxx Xxxx Xx
SX* **** **** XX
9 Number To Hex?

Correct!

[deafdarkman]

Thanks guy I will try that and I hope no ecm hehe , Is Chinamancemu v3 good ? I know no need hdd, just boot floppydisk. or CemuDos72c2 in windows dos , which one best emulation?