Problem unlocking ROM 102 REV 106 (Help Please)

[kanwar1]

When I try to unlock ROM 102 REV 106 in winexplorer 5.0 using the right script for REV 106, it gives me a message box with the button to unlock the card, when i click on the button , it continually gives me the following messages:

RX DATA: FF FF FF FF FF FF +-


can anyone tell me if I should run like it overnight to get it unlocked or is my card looped. When I use MR ultimate toi read the ATR, the ATR comes fine along with ROM 102 REV 106. Any help will be greatly appreciated.

By the way I have opened 2 ROM 102 rev 106 already before by using mikl n2. I am having problem with this one

thanka

[gooding]

Well if you unlocked a rev 106 before I would think that same settings On mik 2 unlocker ( pot settings )and same script should Glitch it .. :) BTW how long been Running .

[kanwar1]

When I unlocked the previous 2 rev 106 cards, i believe it gave me different responses with hex numbers i believe than what i am getting with this one which is

RX DATA: FF FF FF FF FF FF +-

by the way i am currently running it right now and i will keep it running till ther script stops by itself, i am still getting the above responses. its been running since 10 minutes now. I dont know if the above response is the right response i should expect. Can anyone tell me what RX DATA: responses should i see to make sure its working properly.

thanks

[kanwar1]

can anyone knowledgable please please help me?

thanks

[gooding]

HEHE I dont know how much I know but here you go.. Sure some guys here can help more .. --hehe--mik 2......
Working great here guys,you need to toy with the settings and the pot,here are my results from 2 .....Set my delay start to h3800

et the 102 Glitching continue....
AVR delay = 0D
Glitch Delay = 3804
VCC = 1A

RX Data : D8 00 02 6F 00 B5
--
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : D8 00 02 6F 00 B5 --
RX Data : -
RX Data : FF FF FF FF FF FF +-
RX Data : D8 00 02 6F 00 B5 --
RX Data : DE CA FE C0 FF EE
===========================================
Glitch Success!! DE CA FE C0 FF EE
Card is Unlocked!!!
VCC = 19 (~0.492156862745096 vdc)
Glitch Delay = 3804
Glitch type 07
===========================================
User Aborted!

[lightning0009]

I think the mikobu needs a higher pot setting. If you are getting a lot of the FFFF's and ++++++, turn up your pot.

[fubr]

can anyone knowledgable please please help me?

thanks
Even the good Lord himself wont help those who cant help themselves.
maybe square one would be learn how to search and read a few post before you go any further.

see what you come up with and then post back then we will find some knowledgeable testers to help.

[kanwar1]

I have even tried rebelsurf unlocker for ROM 102 rev 106 and higher. it is infact still running for more than 5 hours now. the responses are like +-+-+++---+-+-+----+++rst80++---+-
something like that.

can anyone tell me if my card is looped or not. When I open up MrUltimate and read my ATR, it reads my card's atr fine along with ROM and rev info. Please let me know how to check wether my card is looped or not. I need to get this card unlocked somehow please.

thanks

[Texas Trophy]

IF you are getting an ATR then the card is not looped.

It shouldn't take more than 10 mins to unlock. If it doesn't unlock in that time then you need to change something i.e. setting, script, etc...

[gooding]

OK Try this in settup unlocker settings>> -------------------------------------------------------------------------------rec timout=3000
byte delay=100
reset delay=100---- and start this delays ------------------------------------------------------------------------------DelayStart = &h3806 'h385 is standard, try 375, 350 has been known to hit too.
DelayLimit = &h3A50 'h385 is standard, try 395
GlitchMax = 7 '7 is standard - 7, 8, or 9
GlitchMin = 7 '7 is standard - 6, or 7
trys = 40 '100 is standard
mix = 0.5 '0.5 is standard - try 0.1 to 1.2 use for --- see if that helps --hehe--:D

[kanwar1]

after chganging some settings i am getting the following response from the RON102 REV 106 unlocker

Let the 102 Glitching continue....
AVR delay = 05
Glitch Delay = 3818
VCC = 1A

RX Data : FF FF FF FF FF FF
+-
RX Data : FF FF FF FF FF FF +-
RX Data : D8 00 02 6F 00 B5 --
RX Data : FF FF FF FF FF FF +-
RX Data : FF FF FF FF FF FF +-
RX Data : FF FF FF FF FF FF +-
RX Data : D8 00 02 6F 00 B5 --
RX Data : FF FF FF FF FF FF +-
RX Data : FF FF FF FF FF FF +-
RX Data : FF FF FF FF FF FF +-

let me know what to do next I am using thje following settings:

VCCStart = &H25 'h25 is standard, script is auto vcc dont change 90
VCCLimit = &H05 'h
DelayStart = &h3806 'Change this to whatever you want
DelayLimit = &H3A50 'This is the limit. it will go back to DelayStart when it
reaches here.
GlitchMax = 9 '7 is standard - 7, 8, or 9
GlitchMin = 6 '7 is standard - 6, or 7
trys = 40 '100 is standard
mix = 1.2 '0.5 is standard - try 0.1 to 1.2 use for +-+-+-+- mix
AVRDelay = 3

[skydeur]

HI GAINS IT There A YOU WHO SPEAK FRENCH ABOUT QUEBEC HERE Because, ME I AI OF ENGLISH MISERY:rolleyes:

[kanwar1]

Please let me know if anyone has any comment on my last post.

thanks

[kanwar1]

I also tried to use the freezer trick to put my card in the freezer. I am trying to unlock ROM 102 rev 106 card using rebelsurf unlocker and recieving the following response. it has been running right now for more than 18 hours. Do you guys think should i run it more and till how many hours?

response:


Ram Intercept Installed. Trying to Open the 102.... Delay:3635 VCC:8D Glitch Type:07
Elapsed = 18:15:27
07Rst8D+++-+07Rst8F++-+---+--++-07Rst8F+--07Rst8F-++--++07Rst90++---+--+++-+-+-+---+----++07Rst8F-+-+--+++++-+----07Rst8F+-+-+-++--+-++-+---+-+-+----++-07Rst8E++++++----+-+--------+--+-+--+-+-++-+07Rst8C+-+--