PDA

View Full Version : What's Working With ATmega128

ki55tory
10-27-2003, 04:27 PM
Wouldn't it be nice to have a list of functioning NAwapoM/NNW21 programs? Let the games begin Charles ....
I'm calling on my fellow ATmega128 testers for some feedback on which NAwapoM/NNW21 is working for you. Just your NAwapoM/NNW21 version and IRD Model/Firmware version. That's all! Thanks for your feedback, and feel free to add any other version of NAwapo that I may have missed.

27/28/3700 IRDS
NAwapoM16 (797P NOT TESTED RECENTLY)
NAwapoM18 (797P NOT TESTED RECENTLY)
NAwapoM18-X (797P NOT TESTED RECENTLY)
NAwapoM18-X2 (797P NOT TESTED RECENTLY)
NAwapoM19 (797P NOT TESTED RECENTLY)
NAwapoM20 (797P NOT TESTED RECENTLY)
NNW21 (797P NOT TESTED RECENTLY)
NNW21B (797P NOT TESTED RECENTLY)
NNW21D (797P WORKING WITH VALID ROM3 CAMID)

301.01x IRD
NAwapoM18 (214P NOT TESTED RECENTLY)
NAwapoM19 (214P NOT TESTED RECENTLY)
NAwapoM20 (210P NOT TESTED RECENTLY)
NNW21 (214P NOT TESTED RECENTLY)
NNW21B (214P NOT TESTED RECENTLY)
NNW21D (214P[.010] WORKING WITH VALID ROM3 CAMID)
NNW21D (201P[.013] WORKING WITH VALID ROM3 CAMID)
Chapster99
10-27-2003, 08:31 PM
dp3010.10 F/W P210 Atmega (wide open - no teirs) Nawapom19 - 110 & 119. D/locks switched 'OFF'. No probs.

2700 P766 Atmega w/RTM D/locks switched 'ON'. No probs.
munro_d44
10-28-2003, 02:17 PM
301.13 @ p200, softlocked, NAwapoM20...OK.
cancom
10-31-2003, 07:33 AM
301.13 @ p200, softlocked, NAwapoM20...OK.


HI

I'm a real newbee to Dish [DTV guy].
Is the DP301 013 receiver functional in with Atmega?
If so, please give me a few hints where to start.

cancom
munro_d44
10-31-2003, 02:02 PM
HI

I'm a real newbee to Dish [DTV guy].
Is the DP301 013 receiver functional in with Atmega?
If so, please give me a few hints where to start.

cancom

At this point in time, yes it is. When the hit came a couple weeks ago, I programmed the good 'ole atmega for the .013 while we figured out what was going on. Seems it was a hit & run, so have the rom 3 back in now. But the atmega was working fine for a couple days w/ NAwapoM20 & tiers from TCFD 5.0d. ;)
LOOKOUT
11-02-2003, 07:15 AM
where can i get naw.20?...thanks,lookout
Darnat
11-02-2003, 04:02 PM
where can i get naw.20?...thanks,lookout

Here ya go ...this is the same as Nawapo 19f2
LOOKOUT
11-02-2003, 04:16 PM
thank you very much....lookout :cool:
11-09-2003, 08:44 AM
11-09-2003, 08:45 AM
11-15-2003, 04:42 AM
11-15-2003, 05:26 AM
11-15-2003, 08:44 PM
11-27-2003, 08:49 AM
munro_d44
11-27-2003, 02:32 PM
Radars 11-21-03 fix is still working. Has a minor problem w/ losing locals after a while, but otherwise it is doing well. ;)
11-29-2003, 07:33 PM
munro_d44
11-29-2003, 09:45 PM
Here ya go. The tier list isn't very current, but most of what ya need is there. ;)
munro_d44
11-29-2003, 10:02 PM
Having problems getting the file to upload...will try again later.
zakolo
12-02-2003, 04:28 AM
nw21 tested for the 2800 with subbed cam--works for 45 min max. Stg is up--tried old and digi lock. The image has got to be good maybe that's it.
ki55tory
12-15-2003, 07:28 PM
^up^
c8a4v7
12-18-2003, 09:05 PM
which atmega is better the 18 or 18.43 mhz xtal?
ki55tory
12-19-2003, 12:18 AM
18.000 is more the 'Standard' but either should do just fine.

which atmega is better the 18 or 18.43 mhz xtal?
12-22-2003, 05:06 PM
cancom
12-28-2003, 09:24 PM
1. Anyone seen a schematic for an Atmega board?
I always have to tinker with it till it breaks anyway...ha...ha

2. For Cemu, what is the simplest working connection from the IRD to the puter?

Thanks Guys
cancom
ki55tory
01-13-2004, 05:18 PM
^up^
aapmcm
01-14-2004, 01:25 AM
3800 (3900 Upgraded) P230 Nawapom20 with JeepersDX (Working)
CountryBoy
01-14-2004, 01:48 AM
have a 2700 with new keys, have half the chanels with old tiers, any way to get all chanels, or new updates to know of, does nnw21 work right now?
munro_d44
01-14-2004, 01:55 AM
What SW version is the 2700 at? You may need to update it to get all the channels back if it's an older version.
CountryBoy
01-14-2004, 02:14 AM
so i should go to channel 101, and turn Dlock off, and let it sit wiht out a card in it for 30 minutes or so?
CountryBoy
01-14-2004, 02:17 AM
the SW version is at 769,
munro_d44
01-14-2004, 03:21 AM
Current SW for 2700 is 795p...that may be your problem. Make sure you have 'download w/out permission' checked in the system upgrades menu & power off the ird. Watch the power led on the box...if it's taking the update, it will come on, then off...back on, off & on for a while. Then it should go off after about 20-30 minutes, maybe sooner. If it doesn't take the update easily, then you may need to erase SA5 in the tsop flash & restream the box. It should update right away using this procedure.
CountryBoy
01-14-2004, 05:37 AM
k , great thanks for the quick reply, il give that a try
01-16-2004, 11:11 PM
sukh77
01-29-2004, 08:42 AM
Nawapom19f (P200 dp301.13)runs for about 30min.
A.pfg (p200 dp301.13)Working with 005 nag.
ki55tory
03-09-2004, 02:54 PM
UPDATED: March 09, 2004
ravs84
04-28-2004, 08:53 PM
2700 with NAwapoM14 (797P WORKING FINE) with 61.5 but get blank screen on 110 after 10 sec. ......

Anyone got a solution for that .....
chippy
04-29-2004, 12:47 AM
Try the new nawapo 20 it is working fine with all channels on 61.5 I have been watching 61.5 since last night.
munro_d44
04-29-2004, 05:16 AM
NNW21d is the ticket at the moment.