Unlocking Mili 311

[Shadow925]

I still haven't gotten my friends 311 fixed. He's having the unknown provider and is unable to unlock with the lock code. It seems to have been caused by writing code into the A500 section of the bin.

I plan to use a Nexus unlocker to see if it can be opened again.

This 311 is a Mili modified version. Can I simply plug the passive interface card into the unlocker or do I have to do some trace cuts before glitching?

Thanks.

[Crazy1_79]

Yes traces need to be cut. there are several methods, some that include the removal of caps and resistors. I have recently been in contact with skinerd who gave me this info. The man knows his shit and if he says it works it works. Here are the three trace cuts he recomends. also saves from removing caps

1. Cut the trace between R283 and C373 (be careful there is another trace really close to that one and easily cut by mistake.
2. cut the trace at C371 that is on the side nearest the I card chip
3. Cut the trace that runs from I card chip to C371.
that should be it.

[traylehr]

Good luck ! unknowen provider on the cardless, not to mention the 102's is near impossible to repair . I know i also read where some have been able to repair , but those people are the ones that were able to do something fast, right after writeing they were able to get back in, but if you were unable to get in right after the bad write more than likely you won't get in at all , modded loader with 4619 chips or not . you can't glitch when you don't get any responses . But who knows , maybe someone will invent a script or a program that can revert that unknowen back . There were rom 10's that done the same thing & with the use of Mrom & a few others they were repaired.

[ELMATRACA]

I have a pict with 4 cuts.

1- from 274 to 372
2- from 274 to 289
3- from 283 to 373
4- from 371 to 274

Those cut will be oK or is a mistake in that How to ?