Unlocking Rev 103 & 105

[Anster]

I'm trying to unlock a Rom 102 Rev 103 & Rev 105 using a white nexus from mili and the ROM102_ND13-A0FF-INTERCEPT-autoVCC_20 script. What should the POT be set to? I've seen posts stating about 200 ohms and some that say 2.2kohms. There is a big difference between those to values so I guess the question is: on an absolute scale, what should the POT be set to? Is it 200 ohms or 2200 ohms or something else?

Thanks

Anster

[mopar611]

Use Nagramaster 2.0

13d, dip 2 and 5 down, 2.2Kohms.. Then walk away..

I swear by this..

Mopar

[Anster]

Thanks for the quick reply!

So it is 2.2kohms.....I was trying 200ohms with no luck.

I'll try NM2.0 with 2.2kohms. Thanks.

Anish

[mopar611]

This is just my opinion of course..

I have unlocked 30 plus cards at this rev with Zero problems.. (Knock on wood)

I have talked to others who use 215 ohms.. Crazy uses this.. And he has
no problems..

The higher revs require more accurate ohms or you will loop them.. Dont know why.. Just the way it is..

Mopar

[gooding]

LMAO. Well I see the Sig ( CROW ) is up mopar611 ---hehe-- And why 102 newer rev are easy to loop is the atempted anti glitch code ( the 83 ) Hit the 83 on glitch and marking will result ! so mark a cam enough and she is done. Thats how i understand it. :) BTW Some use low ohms ( My self mod 4053s loader 30 ohms ) Newer 4619s unlocker 400 ohms Rev 103 to rev 108 , But this was with lots Testing . Never looped yet . Test on guys. ;)