t911 modded my self "green board"

[mustwatchtv]

having some trouble unlocking 2 rom102's at rev 105 I tried just about everything I even modded another t911 green board and still nothing also changed the pot this worked before on some rom 10's but not this time

what are most people using to unlock a rom102 at rev 105 with a self modded green board T911


thanks for any info

[Crazy1_79]

pot around 20 ohms

[gooding]

Try this Dips 2 and 3 on and bring pot down till scrip errors then up just a lttle , then restart script ! should see -----+++---+--++-+norsp--++-------++-----+--+--norsp--------++--+-------+---+--- THen let it run .. I have a self modded T911 Glitches rev 105 Just fine . my pot arround 28 ohms .. Good unlocking :) BTW this is with Newd 13 flashed and Install aoff script V 20 ..

[mustwatchtv]

thanks people i'll give er a try, oh what power supply are ya using I've got a 300 mA universal power supply goes from 1.5 to 12v I usually use 9v or 7.5v


thanks again

[chep]

T-911......


7.5 volts --- (1100-1300) ma
pot at 20 ohms.......

:)

[mustwatchtv]

I would like to thank all those who helped me out.....I finally popped those rev 105's heres what happened, I've always used 5k linear taper pots dont know why they would burn out so quick(I must have 16 burned out ones) cuz I have a nice small fan running on the T911, anyway I went to buy yet another pot but they only had the 5k ohm audio taper pot (I wonder why:)) as soon as I soldered that pot on and hooked er up both rev 105's were opened in less than 15 minutes seems the" 5k audio taper" workes better. so hopefully this little lesson will help out one of the members here.
peace

[btmole]

damm 15 minutes?

[wingster]

I have opened serveral 106's in less that 5 min each.