103 programming

[newto]

i know there lots of info out there on 103 programming, but since this being my first 103rev305, after hearing that some ppls have loop or messed thier cards just by using the wrong version program. so can someone verify which programs are safe to use for testing, someone who has done themselves. for reading and writing n2edti bet9, still looking for a good unlocking script(anyone know of a working one) i do have couple of them, but have not tried till i read and get more confidence on using the right scripts programs, penga's blocker, dtierworks. i read in another forum to patch the blocker before the tierworks, or can cause problems,can someonoe verify if thats true. and finally did i missed anything. i know there not whole lot of threads here, so more the better.

[lightning0009]

Safe for testing? That is a contradictory statement. I have unlocked rom103 rev105 with the FM Final interceptor script. I did have one that would say it was unlocked, but then wasn't, I put it aside. n2edit betad9 will not read/write rom103's. n2edit 2.57 will. Or the new n2edit2.58 will also.

I have never patched the blocker before adding the tiers. I usually just patch the same gopher32 tiers that I use for rom102's on rom103's after reactivating the bin of course. If it's a 322 or 522 I then move the dataspace to start at A700 like the cards and then patch the new penga blocker.

I've ruined a few, mostly testing new blockers (pengas first rom103 blocker, I verified for him that it made my card provider unknown) or unlocker programs (romx utility when it frist came out), but that is testing. Good luck.

[fibrechunk]

I have two 322 I'am working on. The first unlocked and read fine. Number 2 went provider unkown....I ran Fubar script and got it glitched and read. (still says provider unkown..but reads fine)

Now on the first bin I followed this and it worked perfectly!!!!
Here are the steps I use on my 103 I-cam 322 ird
I'm pretty sure is the cam programming.
I had same results after programming my first 322.
What I did in order to get it working was
Open copy of original bin with nagraedit 5.1
Click on data space editor tab
click on consolidate space button
click on defragment button
click on relocate data space > select from A700 to BFFF
save bin as moved data
open dttierworks v27.5
Click file > clear all checks
click file > clear all info
organize & wipe tiers > select moved data bin
set ppv tiers > wipe ppv from bin > select moved data bin
generate ppv > done
select tiers
select zipcode, time zone & remap locals
Select date
get keys > save & write keys
Modify bin file > select moved data bin
close dttierworks
Open N2edit v2.57
Open file mod with dttierworks
Apply patch > select blocker v3L
verify your password at $9FE8
Apply patch
save bin as bin with blocker *.bn103
Read cam
Clean codespace
clean codespace
clean codespace
open bin with blocker *.bn103
write to cam
read cam to check is locked
conect cam
enjoy
This has worked for me
watch TV

All said and good but now for number 2!!!! If I reprogammed with the above will it still read provider unkown???? Does anybody have a good virgin bin for the 322 so I can write it to first and get rid of provided unkown. Maybe I don't have to but I really like these irds.....and with the bin already kind of screwed I don't want to f**k it up more.

[REALLY PISSED]

103 are very easy i have unlocked 386-388... all work fine... just move data space first, then open tier works, then open bin in nagra 2.57 and add blocker and write to card...sounds easy enough

[chris.n]

Not hijacking a thread here, but just trying to learn. If anybody knows whether a rom 103 @ Rev 300 will work on a 301.10 yet. When I asked earlier this year I was told yes and no, so I decided to hold off for a while. If it works on a 301.10 I would like to learn about writing to it!

[skinerd]

Not hijacking a thread here, but just trying to learn. If anybody knows whether a rom 103 @ Rev 300 will work on a 301.10 yet. When I asked earlier this year I was told yes and no, so I decided to hold off for a while. If it works on a 301.10 I would like to learn about writing to it!

No.......now it will not........

[tyfon]

FIBERCHUNK...

I have a question on the data move...
on a 311 Ird the info starts at a500 to a700
and that data is moved below were is empty space..
I have done several of the 311 and they are working..

NOW.. on the 322 is going to be the same?
because you mention to moved data from A700 to BFFF
and that is all the way down..can you clarify that
like I said is it going to be tha same from A500 to A700 and that to empty space below?

here is what I have some info I have edit
to protect info of Ird.........


$A480=83838383838383838383838383838383
$A490=83838383838383838383838383838383
$A4A0=83838383838383838383838383838383
$A4B0=83838383838383838383838383838383
$A4C0=83838383838383838383838383084C6C
$A4D0=1C0202046767C80202220303C7020212
$A4E0=0202150202260707274747166F6F2902
$A4F0=026502026412121A0202320505330202
$A500=0000000000000000000000000000000C
$A510=000414140413127080010200010102FF
$A520=FFA8BF00000A7FFF0C01000B0B000000
$A530=00000000000000000C00020F0F020000
$A540=00010101000000000058A8BE0C00050D
$A550=0D050000000100000000051ACDD10C00
$A560=070D0D0714524E560101130000CF1490
$A570=0C010042420000000000000000000000
$A580=00000000000000000000000000000000
$A590=00000000000000000000000000000000
$A5A0=00000000000000000000000000000000
$A5B0=000000000000000C0008090908000000
$A5C0=01000120000C00061B1B060000000101
$A5D0=00000918103A9C19BAB592DBBFFF4F30
$A5E0=09C8BA168C0C00066B6B060000000101
$A5F0=0000191060430D7576082EA98CC969E6
$A600=09515EEA584BE244C0AC6DD90A9FD31E
$A610=4E7AF5C6BF64C35AD46C46FD9FB99D7D
$A620=3565B901B70205EFBF3CF5365ED12163
$A630=D135566029E86613C1CF26F0E3467A48
$A640=3692F48A11AD7612133F9BE6848EC75D
$A650=A04E045F930C00061B1B060000000101
$A660=00000B1810C82E2BD594599E6A34A88C
$A670=260C55F8C60C00062323060000000100
$A680=0000011018999A811650503D44F9869C
$A690=205B7EC376EBC5FAE9C40E00180C0006
$A6A0=1B1B0600000001000000001810454865
$A6B0=27D17D0A303CA8AA342BD52C8A0C0006
$A6C0=2323060000000100000002101844108F
$A6D0=178A617999CCA13DB04FC16269A914AC
$A6E0=3FC00C80250C00061B1B060000000100
$A6F0=00000318101195CFCBBA30ADDE6240E5
$A700=C1FC53AEAF0C00066B6B060000000100
$A710=000011106027853EC19A05D58D01F60B
$A720=23CE65757BF0D4D0ABD916D11E6596B1
$A730=40AE5E04FADCDA760371A672BDA7C721

empty space starts at....B0A0

can you comment on this data movement.

thanks..

[REALLY PISSED]

copy a500-all the way down... then paste at a700, then zero everything from a500 to a700

[fibrechunk]

I used nigra 5.2 and it gives you a tab button to move all info for you...no need to highlight and move I guess. Still kind of new at some of this I guess.

[crazyworld]

hi i was just wondering how i would re-program my card for my satellite dish ?? I am not sure exactly how and here to download the program from and how i would use this program any help would be greatly appreciated