PDA

View Full Version : Junkyard

gordonc
10-28-2003, 04:06 AM
I have a old 4500 and a 3500 I used a volt meter and got my boxkeys and use a emu of course I got ecm and the ird's are locked I got my 3100 up and running using a valid cam# and have been fine for 48 hours does anyone no if there is a way to unlock my 3500 and 4500?
there is no j-tag port on these ird's
CALL4DSSTV
10-28-2003, 04:27 AM
I have a old 4500 and a 3500 I used a volt meter and got my boxkeys and use a emu of course I got ecm and the ird's are locked I got my 3100 up and running using a valid cam# and have been fine for 48 hours does anyone no if there is a way to unlock my 3500 and 4500?
there is no j-tag port on these ird's


You can buy the jtag tool from www.spacetwister.com
gordonc
10-28-2003, 04:31 AM
you can't use a j-tag on these ird thanks for trying to help :)
Chapster99
10-28-2003, 04:31 AM
No need. Just do the 'Junkyard fix'.
gordonc
10-28-2003, 04:34 AM
what is the junkyard fix never heard of it?
Chapster99
10-28-2003, 04:36 AM
Read this...

http://www.dssftp.com/forum/upload/showthread.php?t=6422
gordonc
10-28-2003, 04:37 AM
thanks will try
gordonc
10-28-2003, 04:45 AM
That link syas it's for a 4000 ird will this still work on a 4500 ird?
jvc
10-28-2003, 05:42 AM
That link syas it's for a 4000 ird will this still work on a 4500 ird?

Model 4000 and 4500 exactly the same,

Your Ird still connect to stream, remove access card
The junkyard fix for your receiver is the square silver or #1 pin that is around the tsop. it is u19.solder a wire to it and ground the other end. it should flicker--the picture, do not turn off power, wait for 5-7 minutes. They will ask please insert the card, that done.
gordonc
10-28-2003, 06:08 AM
Thanks work like a dream I am up and running I thought my old 4500 was scrape :) thanks again guys
gordonc
10-28-2003, 04:28 PM
Well thanks to everyone who help me with my 4500 and 3500 junkyard worked like a dream.
will junkyard work on a 2700 and 3100 aswell?
Chapster99
10-28-2003, 04:47 PM
I wouldn't recommend doing that on any model other than the 'grey' boxes (x000, x500).

Use a Jtag for all others.
CALL4DSSTV
10-28-2003, 05:03 PM
I wouldn't recommend doing that on any model other than the 'grey' boxes (x000, x500).

Use a Jtag for all others.

Anyone have pics of this junkyard fix?
is it safe to do?
CALL4DSSTV
10-28-2003, 05:08 PM
Anyone have pics of this junkyard fix?
is it safe to do?

Here is the tool at xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
"Our F040 Jtag is a stand alone unit that will automatically repair all older IRD's (1000, 2000, 3000, 4000 4500) with no tsop port and with out the removal of the TSOP chip. Simply drop the probe on to the TSOP and the unit will read/save/write/repair your IRD automatically! Get those old IRD's that you though were goners and bring them back to life in a snap with the PRO-Jtag, or simply read box keys from non ecm'd units."

Its a jtag tool!!

trying to help
Chapster99
10-28-2003, 05:19 PM
From what I read from DssHacker, the F040 costs about 400US.

Yes, I have pics for the Junkyard fix. I'll upload it in the files.
CALL4DSSTV
10-28-2003, 05:28 PM
From what I read from DssHacker, the F040 costs about 400US.

Yes, I have pics for the Junkyard fix. I'll upload it in the files.

Thanks