white nexus unlocker and software

[lennstrom14]

i recently bought a white nexus unlocker from mili and have a couple questions...
i am trying to unlock a rom 102 ver 108 card do you know what dip switch settings should be used to unlock card...and ohm setting for the 4619 pot...

also since this card is going to be used in a coolsat 5000 with updated x2 card reader ...what software do i use to unlock the card? i did some reading on sites and since card reader programs the card instead of an iso ...do i use xp atmel 1.31 to flash unlocker....do i tnen use n2 edit 2.52 to read and write card or do i skip this since it is c/s card reader....
do i need to run win explorer 5.0 to program unlocked card or is this too bypassed since i have the c/s card reader....i am confused what is really necessary ...
i am aware that there is a script software for rom102 ver 108 card do i just use this ?
thanks for your help ...i dont want to go thru unnecassary steps ...

[adastra]

click on the blue icon on any page that says "Rom 102 Unlocking", and READ. then go to "Nagra Glitching and Unlocking" on the main forums page and READ. no one gets spoon fed around here.

[fellah]

click on the blue icon on any page that says "Rom 102 Unlocking", and READ. then go to "Nagra Glitching and Unlocking" on the main forums page and READ. no one gets spoon fed around here.It is peeps like you that give bad rap to a wonderful forum. poor dude just asked a question, if you can't spoon feed him then chill, somebody else will. I bet you acquired all of your 4 posts by being un-helpful. Geeze!!!

[crazycat]

Trust me. that guide will get you no where. Just keep asking. Someone will help you. I just unlocked my 1st card yesterday, thanks to mopar! There is always someone that says to read the guide, and if you are like me, you read it 100 times and still got nothing. right?

[refixed]

Hey bud, disregard that idot about spoon feeding. If you get any luck with their unlocking forum, you got more brains than i do.(wouldnt surprise me)
The forum here is for helping peeps like you. I wish i could help you but like yourself, i keep gettings answer like " no one will spoon feed you here. Hell, he probably cant do it himself the arse!
goto other forums thast might help, I probably cant mention it in case they boot me, lmfao
take care and keep trying,
ps , dont loop your card heh

[refixed]

by the way, i forgot to menttion that after youve been reading and reading, you will then be asked to downlaod , probably a winex configuring setting , guess what, it'll probably cost you another 25,00 a year. Even tho it states that you can download at a later time because this site is for VIP (suckers whom have paid

[adastra]

4 posts after mine bitching about me not spoon feeding a newb, and none of them offer any help. i checked ur 56 posts fellah, lot of attaboys and gee thanks in there, very little help. and i've been in the game for 9 years, refixed. the guides help people know the terms and sequences of doing things. lennstrom still doesn't have a grasp of the difference between the glitcher and iso, and until he knows that, what can he do? dip switches and ohm settings has its own thread, under the glitching thread. "give a man a fish and he eats for a day. teach a man to fish and he eats the rest of his life" use the search tool to find what u need and u don't have to wait a week and have to read 20 posts to your question from nimrods that can't help

[rob24_365]

Suckers who can download! :rolleyes:

You guys (except adastra) need to get a life! People say to read (if you've properly completed the fifth grade, you'll know how to do that) and you encourage people to go on whining until somebody helps you. How gauche!

Somebody clear the munchkins out of the ballroom! I don't think this post should go on.....

Rob24_365

[lennstrom14]

i wish to thank adastra for not helping ...thanks to others that responded regarding this lack of support in response to my questions. i did read that section and it is not answered in relation to those of us that set up our coolsat card readers to program cards.. i am new to this part of satellite programming ..but have a 10 1/2 ft satellite c/band ku dish for over 20 yrs and programmed it myself . I am computer help desk person and technical as well as an accountant...also adastra i am not a man ...i am a professional woman that is working on unlocking with a friend of mine that installed my dishes with me .. a 4 lnb satellite dish and the weingard 10 1/2 ft. i i have had fta for over a few years (strong receiver) ...and recently c/s 5000 and 4000 units ...i read alot and the answers there are not clarified for those of us with the coolsats ...i was told by another website that most of that is for users that have other types of receivers...thanks for not helping ....sorry if i bother you for asking a question --i thought this was your job...

[lennstrom14]

if you read what i wrote when i asked the initial question i wanted to verify what i had to to with the coolsat 5000 and 4000 models that i already installed the 127 bins in so that they read and program the 102 cards....
i have mili white nexus unlocker that i am going to unlock a rom102 ver 108 card with ...i wanted to verify the correct ohm setting so i dont mess up the card ...i read on one of the forums that someone set it at 700 ohms ...to unlock a 107/108 card ...does anyone know if this is correct for sure...
i did read your 102 unlocking section as well as other sites ...
i also read milis forum that nexus unlockers are already flashed ....otherwise i assume you run xp amel 1.31 to flash the unlocker ...is this the best version for unocking or is another version better when unlocking a 102 ver 108 card?
i also asked since i have updated coolsat bin do i still need to run win explorer 5.0 since this programs the unlocked card...
i would appreciate confirmation of this without any snide comments ..i do read alot and am techncal ..i just dont want to mess up the card..thanks

[adastra]

Have you looked in the FTA section?
http://www.dssftp.com/forum/t66143-coolsat-how-toos.html

[cejarret]

Set Your Ohms to 700.
Ignore those here who do not know how to write any thing other that "read the forums" or "no one gets spoon fed here".
In most cases, they themselves had to be spoonfed a lot when they first got started.

[rob24_365]

The general philosophy of this board has always been "Read, read, read" and I am only trying to continue it.

I suppose if someone still wants to help, that's perfectly fine with me and the others, but if you learn it yourself, you are less likely to need to be spoon-fed the next time.

Rob24_365