Pansat**Viewsat

[FRESENG]

It this possible?

I triying to set a Pansat 3500 and a Viewsat Xtreme.

Have dish 500
Double twin Legacy LNB'S
Two 4X1 switch

Switch 1 for Vewsat Xtreme

119 set to port 1 from LNB 1 left side
110 set to port 2 from LNB 2 right side

Switch 2 for Pansat 3500

119 set to port 1 from LNB 1 left side
110 set to port 2 from NB 2 right side

I have tried different ways but I can not get both sats in the viewsat . IMy 3500 works, but sometimes sat disapperars, I have use my 3500 Pansat with no problems , once I added the Xtreme box nightmare started.

Is this set up possible or there is a discrepancy setting these two boxes.

Need advise

Thanks

[FRESENG]

What a bout you Crow 492, you may have an answer? Anybody else?

[poolboy31]

I had a pansat 2700a and a viewsat working togeather and not a whole lot of problems.Did you get the extreme to work properly,this is poolboy31.Also got another extreme and that works a whole lot better,also make sure that you use the viewsat switches!

[Crow 492]

It this possible?

I triying to set a Pansat 3500 and a Viewsat Xtreme.

Have dish 500
Double twin Legacy LNB'S
Two 4X1 switch

Switch 1 for Vewsat Xtreme

119 set to port 1 from LNB 1 left side
110 set to port 2 from LNB 2 right side

Switch 2 for Pansat 3500

119 set to port 1 from LNB 1 left side
110 set to port 2 from NB 2 right side

I have tried different ways but I can not get both sats in the viewsat . IMy 3500 works, but sometimes sat disapperars, I have use my 3500 Pansat with no problems , once I added the Xtreme box nightmare started.

Is this set up possible or there is a discrepancy setting these two boxes.

Need advise

Thanks



In antena setup in your menu check to see if you got your Diseqc setting right. You will half to change it to the port setting you have settup.

[honkey]

I had a pansat 2700a and a viewsat working togeather and not a whole lot of problems.Did you get the extreme to work properly,this is poolboy31.Also got another extreme and that works a whole lot better,also make sure that you use the viewsat switches!

wwwwaaatts up POOLBOY? HONKEY

[FRESENG]

Thank you guys,

It seems I fix the problem. My settings where ok , the problerm were the swictches. I have 2 new switches , but both have problems on port 1. I changed to port 2,3 and 4 on both and , it works.

.

[MetM]

Always turn the back switch to OFF when changing/trying ports.