Need Help 510 and 301-013

[Gene2u]

Hi
I have a pvr510 i am paying for everything but ppv and i have pull the IRD number and box keys on it i got tsop on it 510 now i have 301-013 single chip and i want to write this tsop to 301-013 and clone the card rom 102
so i can get everything what program do i use and address is the ird number and box keys and both of them have session keys
Thanks
Gene2u

[mopar611]

What is the rev of the 510??

[Gene2u]

Hi Mopar611
it rev109 I want to be ready when the break come
Thanks
Gene2u

[bartman0916]

What is the rev of the 510??

109 is not revision of the 510 its the revision of the Rom102
dont you mean software revision mopar ?

[Texas Trophy]

Hi
I have a pvr510 i am paying for everything but ppv and i have pull the IRD number and box keys on it i got tsop on it 510 now i have 301-013 single chip and i want to write this tsop to 301-013 and clone the card rom 102
so i can get everything what program do i use and address is the ird number and box keys and both of them have session keys
Thanks
Gene2u

If the card image for the 510 is at rev 109 you won't be able to get into it right now.

If you want to get the 301 running then get a working image from the downloads (http://dssftp.com/files) and follow my How-To (http://dssftp.com/forum/t65015-unmarried-301013-single-tsop-amp-rom-102-howto.html). You can use the IRD & BK that came with the 301 and use the cam # from your 510.

[Gene2u]

Hi Texas Trophy
That sound good i will try that i had to pay $25.00 so i could download the GenDT08-SK-v3.3 as soon i can get on that site i will try this and thanks alotts What is the cam# is it the IRD # on my 510?
Thanks
Gene2u

[Texas Trophy]

If you look on the info screen with the 510 hooked up you will see a S00...#. Use that # for your cam # for your 301. By the way, you do have another card to use for the 301 right?

[Gene2u]

Hi Texas Trophy
Yes Rom 102 rev103 chip card i bought off this site. How do i load the (Frist add this to GenDT)
Thanks
Gene2u

[willy_152]

hi i have a 510 and i download the new bin 10B but i don't have ppv,300 and other channel please help

[Gene2u]

Hi
I need help how do i load this in ( Frist add this config to ) GenDT ?
Thanks
Gene2u

[Texas Trophy]

Rename the original GenDT08 to GenDT08_All. Open GenDT08_All and delete everything. Copy and paste the 301 config below and save as GenDT08.
Current Ird Idea Key
ideakey = 00000000101924314051647990A9C4E1
; Default to use session keys option (1) or DT08 (0) when program starts
usesk = 1
;======================
;Dishnetwork IRD models
// 301-13 10ENP
// 31 30 45 4E 50
[301-13]
model = 301-13
modelid = 10ENP
modelpoint = 3DFFF4
softwarepoint = 3DFFF8
checksumstart = D0000
checksumend = 3DFFFC
checksumpoint = 3DFFFC
checkpoint = 3DFF90
bootstrappoint = 3FBFE0
bootcspoint = 3FBFE8
buildconfpoint = 3FFFA8
irdnumpoint = 3FFFC0
boxkeypoint = 3FFFC4
rsa1 = 0
rsa2 = 0
sk = 3FFF40
dualtsop = 0

[Gene2u]

Hi Texas Trophy
Well the info. you gave me i save as ( GenDT08_All.txt ) and then i rename that file to ( GenDT08_ALL.cfg ) i made a folder ( Gen08_all ) and i put GenDt08_sk_v3_3.zip in that folder unzip it and then i delete
(datatype.cfg, gendt08.cfg, patch101.cfg, patch.cfg, defaultkeys.cfg, localremap.cfg, patch102.cfg, release3notes.txt, readme.html, and all i got in that folder now is GenDT08_SK.exe, and Gent08_ALL.cfg, and now i got GopherX 42 TiersRev109for0001-V28G block...BN102 file and my TSOP for my pvr510 and my TSOP for my 301_013
R0012345678-PVR501-23AB-CAEA-10S-653P22.bin This is my pvr 510

R0043218765-301-18DB-DANA-10E-P342-3.bin This is my 301-013
it tell me to load card Image it will not load do i need change BN102
to a image files? Do i use 510 TSOP or 301-13? Do i need a file to change
bin file to a image?
Thanks
Gene2u

[Texas Trophy]

You need to start all over. You weren't suppose to delete any of the files in GenDT.

My instructions were to simply rename the original config file to GenDT08_All (DO NOT ADD .txt or .cfg or anything) Then open GenDT08_All (should ask you what to open with. Select Notepad) Delete all of the information that it is showing and copy and paste the information that I provided. Then save that file as GenDT08.

Get back to me after you have gotten that straightened out.

[Gene2u]

Hi Texas Trophy
I have got it the way you ask (My main Folder is (GenDT08) in side it i have GenDT08 unzip it got all the files back in it I got Gent08_ALL .cfg the way you ask now what
Thanks Thanks
Gene2u

[Texas Trophy]

Open GenDT08_ALL.cfg using Notepad. Erase/delete all of the info. and copy & paste the info I provided a few posts back. Now save that file as GenDT08. This will be your new config file.

[Gene2u]

Hi Texas Trophy
OK i have a GenDT08.cfg now. What now?
Thanks
Gene2u

[Texas Trophy]

Just use my How To (http://dssftp.com/forum/t65015-unmarried-301013-single-tsop-amp-rom-102-howto.html) and go through the steps. If you have any problems then ask.

[Gene2u]

Hi Texas Trophy
Well i open GophersX 42 Tiers Rev 109 for 0001 v28G blocker expires New Keys 1-1-07.bn102 i put my Pvr510 card number and zip code and time zone and zero out key 86 key 96 in Model: Blank Modle ID: Blank solfware: P243 Bootstrap: 13EB Build Config: EAEA Idea Key. Empty Secondary key - SK: Empty Non SK ird number/boxkey/crc Check by FF out old ird Number/Boxkeys 28 Fs in it App Checksum: is Blank Boot Checksum: is Blank Checkpoint: is Blank MyTSOP is (R0011223344-PVR501-23AB-CAEA-10S-653P.bin ) i am putting this in a 301-013 i am lost. It tell me to open TSOP Image and mine is a bin i am paying for the Pvr510 and i want to put it in the 301-013 dose this make cents to you? and at bottom it got (Error 10: CAN NOT DETERMINE MODLE
Thanks
Gene2u

[Texas Trophy]

You have the first part right with the card image but you are not suppose to be using the PVR501 TSOP. You are suppose to use the 301 TSOP. The only thing you will be using from the 510 is the cam # and that is it.

I don't remember if it came up before but please tell me that the 301 has been vid modded? If not then we might as well stop right here because that needs to be done before anything.

[Gene2u]

Hi Texas Trophy
Yes i have did a vid modded it is ready
Thanks
Gene2u

[Texas Trophy]

Where you at on this Gene?

[Gene2u]

Hi Texas Trophy
Ok on the (Card Infomation screen) i put my Pvr510 Cam# in Cam ID and put my zip code, time Zone, ED And then i open my tsop.image i put my 301-13 Ird # R0011223344 and then i put the Box keys in all from 301 but can not put Model: Blank Model ID: Blank Solfware: P243 Bootstrap: 13EB and Build Config: EAEA. My 301 has Model ID: 10E, Solfware: P342, Build Config: DANA, Iam lost
Thanks
Gene2u