Newbie 102 Glitcher

[Soldermonkey]

Hi I bought a 510 with a ROM 102 Rev 103 from Fleabay. I tried to read the card with N2Edit and got Rom102 Rev103 provider D*sh Network etc. but after that got a read error. I have an orange Nexus unlocker with the old 4053 chips and am trying to unlock it using Smiling Jack's sticky and ROM102_ND13_A0FF-INTERCEPT-autoVCC_20.XVB with the unlocker flashed with NewD13. My pot only measures 0-5 ohms on my meter though so I set it at 2 and when I turn on dip 1 I get:

Let the 102 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 037A
VCC = 27

--------------------------------------------NoRsp+---+------+---NoRsp+---+---+---+-- hit VCCLimit, back up to &h40 vcc ---------------------

So I tried with all dips off and get this but it goes on forever.

Let the 102 Glitching continue....
LETS TRY NEW DELAY
Glitch Delay = 0385
VCC = 18

-------------------------------------------- hit VCCLimit, back up to &h40 vcc --------------

Now when I stick it into my ISO and try to read it I just get NO ATR.
Did I loop it? What am I doing wrong?

[smilingjack]

0-5 ohms Is not enough,

NoRsp+---+------+---NoRsp+---+---+---+-- hit VCCLimit, back up to &h40 vcc ---------------------

I was at the top of the scale when I get it.

Did you try the stetting I used too ?

[Soldermonkey]

Yes I tried all your settings in the script but my potentiometer wont adjust to that high of range. Should I change it? If so what part # at Radio Shack is it?
Thanks
PS I bought this from Milis store I wonder why it has the wrong pot on it?

Edit: My bad(drunk) I had my dmm on the wrong setting, the pot actually has a range of about 25-650 but it wont adjust to the 50-70 range no how(junk).

[Texas Trophy]

You're reading the meter wrong. To set the pot at 700ohms if you are on a 2000ohm scale then it should read 700ohms. If you are on a 20kohm scale then your reading is 0.70 kohms and if you're on a 2000kohm scale your reading is 00.7 kohms.

[Soldermonkey]

Thanks Tex I had it on the 2K scale. I realized this is the wrong category so I opened a new thread in the glitching forum. Please close this one and dont spank me.