10/10/06 Keys

[Bandit5906]

Key0:0CFA3973915FF554E9561C428B7ACAB2
Key1:2F1F8F265118BA335F951CDBEE1868D9


DN keys!

BTW Guys: changing the keys in the settings.ini doesn't get much easier than that! Simple C&P and then program in RC as usual!

[Lauralee]

Are these the new codes for today and if so are they for the coolsat 6000. I am a newbie here and am just learning about everything. Please let me know if I just need to enter the codes or do I have to download a new file? Thanks to anyone who can help!! Us newbies need all the help we can get!! lol:)

[rosscraig]

used the above keys and have no channels at all.

[lamdog]

have coolsat 5000 and im up and running with these keys

[rosscraig]

did u input them under nagra 1 or 2? My coolsat isn't working now.

[lamdog]

under nagra 1

[Zabeer]

These keys are working and tested. Have fun!!
Satellite Encryption Keys
Bell ExpressVu (Last Update: 2006/10/10/ 11:20 EST)
Key 0: C9 BB A9 83 ED AE 55 D6 62 DE 45 C1 EF 14 B5 D3
Key 1: 99 AB 62 AB 10 07 1C E8 A2 6B 2A 2A B5 B0 9C 57 Active
Echostar DishNetwork (Last Update: 2006/10/10 17:47EST)
Key 0: 0C FA 39 73 91 5F F5 54 E9 56 1C 42 8B 7A CA B2
Key 1: 2F 1F 8F 26 51 18 BA 33 5F 95 1C DB EE 18 68 D9 Active

[omare]

Key0:0CFA3973915FF554E9561C428B7ACAB2
Key1:2F1F8F265118BA335F951CDBEE1868D9
DN keys!
BTW Guys: changing the keys in the settings.ini doesn't get much easier than that! Simple C&P and then program in RC as usual!


And your posting of the keys makes it even easier at times like this.

Thank you Bandit for your timely effort.

[rosscraig]

ok here is what I have inputed and still no channels:

Key 10: 0C FA 39 73 91 5F F5 54
Key 11: E9 56 1C 42 8B 7A CA B2
Key 20: 2F 1F 8F 26 51 1B BA 33
Key 21: 5F 95 1C DB EE 18 68 D9

Is this correct?

[BirdieMod]

They get entered under nagra 2


Only key 1 has changed key 0 is the same yet since oct 6th

[rosscraig]

they have to be entered under nagra 1 or 3, 2 is bev for me. I had them under 3 last time. I tried the keys under 1 and 3 as I posted them above but no channels yet.

[njtiger007]

What's going on ?

I tried new keys and still Down...

[BirdieMod]

hey this is a romcode thread hijacked to fta

[mdfsandman]

I have two cards. One took the keys in the .ini file setting the other I had to do using nagramaster. Both up! Thanks for the speedy key post

[rosscraig]

Sorry about that never noticed the thread heading.

[tomok]

When you get the message that it's time to imput new keys....turn on the autoroll for a few minutes.....then go into and you will only have to change 2-3 letters/numbers instead of imputting them all....turn autoroll off again

[donkey3]

Thanks Zabeer............:)

[Lauralee]

Does everyone with the using Nigra 2 for bell have all channels? I got them to work but there are a few channels that are not coming through like hgtv and the toon e/w. Some have strong signals but say scramble channel or bad signal. The others have low signals. Can anyone help me out with this problem? Or tell me if you are having the same problem. Thanks again to everyone who keeps our tv's working!!!!Gotta love those ppl!! lol

[LocoMex]

Problem with RomCode here. I c/p the Key 1 into the ini file. Save it and double check to make sure it stays in the ini file. Program card. Black screen. Recheck Key 1 in ini file and it is still there. Reprogram card, but check private bin. Still black screen. Clean card again, and read in Nagramaster. Key 0 is there, but says no Key 1. Try romcode again, still same thing. No key 1. So, I manually typed in the Key 1 in the ini file and try again. Same thing. No Key1 when I check in nagramaster. Redownloaded romcode 4.21 and try again. Still no Key 1. Is there something I'm doing wrong here? Is there a problem with the newest version of Romcode? Or, could this be a card issue? Any help is appreciated. Thanks in advance.

[budme]

ok here is what I have inputed and still no channels:

Key 10: 0C FA 39 73 91 5F F5 54
Key 11: E9 56 1C 42 8B 7A CA B2
Key 20: 2F 1F 8F 26 51 1B BA 33
Key 21: 5F 95 1C DB EE 18 68 D9

Is this correct?key20 2f 1f 8f 26 51 18 ba 33

[LocoMex]

Don't bother answering my questions. Used N2edit and Tierworks to get the Key 1 to write back to the card. Reprogramed with Romcode and all is well. Still can't figure out how I lost Key 1 and why it would not write itself back in via the romcode ini file. Oh well.

[NoC]

the Keys are changed in the settings.ini but still back also.. Why are you some of you up?

What's going on ?

I tried new keys and still Down...

[slave2fishing]

I have the same problem LocoMex. No key1 being found. How do you write it back?

[Homer J. Simpson]

i tried new keys and also DOWN!

[rosey]

Hi guys and gals

Can anyone confirm if the new keys for dish is working???

much appreciated
rosey

[madmadmad]

loco
i never used tierworks to do this. i read card with n2edit saved image then went to tier works got keys. what next

[madmadmad]

guys are we talking about the sub cards w/ romcode or the private bin? my problem is the private bin card sub card took the new keys w/out a problem. private bin not working

[pswine1]

Hi guys and gals

Can anyone confirm if the new keys for dish is working???

much appreciated
roseyYes they are working.

[pswine1]

loco
i never used tierworks to do this. i read card with n2edit saved image then went to tier works got keys. what nextTry using Nagra Master 3.x which includes a key grabber.

[Nine]

I have cardless Coolsat 4000 plus.
Please,tell me curent :
Keys 10,
Keys 11,
Keys 20,
Keys21.

[madmadmad]

i tried and it just won't write the second key to the card using nagra master. it reads epromm is there any program that i could do this manually. somehow this card doesn't want to take the new key one. any suggestions ideal key 96 reads no key found

[EGG SUCKER]

I,m in the same boat, key 1 will not program, I installed and unistalled romecode, niagramaster 3, tryed n2edit with dt tier works 2.67. still wont read key 1,did I MISS SOMETHING OR PROGRAM WRONG? thanks

[Bandit5906]

guys are we talking about the sub cards w/ romcode or the private bin? my problem is the private bin card sub card took the new keys w/out a problem. private bin not working

Both married/sub and private bin are working fine!

What version of RC are you using?