NagraEdit vs NagraMaster

[jrod1162a]

Nagraedit vs NagraMaster
I have a rom 102 rev 103 card that in NagraEdit says basckdoor not installed run interceptor but I can use NagraMaster and read and write to card all day long whats up with this

[Ohms]

It sounds like NagraEdit is lying. You would not be able to read or write if the intercept was not installed.

[JoeSixpack]

Make sure you are using NagraEdit 5.2, you may also have to use the "install NagraEdit compliant Intercept D2C", should take care of your prob! Here is the D2C:
; Convert N2Edit Intercept to NagraEdit Intercept
; By The Code Warriors (packaged by Hack_kid)
; This will check for a public intercept on your card then test to see if it is
; valid with NagraEdit if not it will replace it with a valid NagraEdit Intercept
; And you will then be able to read and write again in nagraEdit.

RS
CP 3F FF 95 00 FF 91 81 71 .. 47 00 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
JF StartATRInvalid
CP 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50 31 30 32 20 .. .. .. .. .. .. ..
JF BadRomType
TX 21 C1 01 A0 **
WT 00 05
RX
CP 12 .. 01 A0 **
JF BadIFS
TX 21 00 6D A0 CA 00 00 67 04 65 00 00 86 00 AA 9D 9D 9D 9D 9D 9D 9D 9D CC 7A 95 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D BC 88 02 **
WT 00 08
RX
CP 12 .. 04 84 .. 90 00 **
JF BadPublicInterceptTestPrep
TX 21 00 07 A0 FF 00 00 02 48 00 33
WT 00 06
RX
CP 12 .. 02 90 00 **
JS PublicInterceptTestSuccess
CP 12 .. 04 78 .. 90 00 **
JS PublicInterceptNotPresent
JP PublicInterceptTestFailed
:PublicInterceptTestSuccess
TX 21 00 6D A0 CA 00 00 67 04 65 00 00 86 00 AA 9D 9D 9D 9D 9D 9D 9D 9D 18 64 A6 4B B7 6B 71 80 CD 7C 16 31 76 9C 08 CC 7A 95 00 00 01 05 05 00 7D 2A 00 88 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D 9D BC 88 02 **
WT 00 08
RX
CP 12 .. 04 84 .. 90 00 **
JF BadWriteBugsPrep
TX 21 00 07 A0 FF 00 00 02 48 00 33
WT 00 06
RX
CP 12 .. 02 90 00 **
JS WriteBugsSuccess
JP WriteBugsFailed
:WriteBugsSuccess
MG Conversion_successful
JP ExitScript
:WriteBugsFailed
MG Writing_new_NagraEdit_interceptor_appears_to_have_ failed
JP ExitScript
:BadWriteBugsPrep
MG Failed_to_prep_for_writing_NagraEdit_interceptor
JP ExitScript
:PublicInterceptTestFailed
MG Public_Intercept_test_failed
JP ExitScript
:PublicInterceptNotPresent
MG Public_Intercept_not_present
JP ExitScript
:BadPublicInterceptTestPrep
MG Failed_to_prep_for_public_intercept_test
JP ExitScript
:BadIFS
MG SetIFS_failed
JP ExitScript
:BadRomType
MG Card_is_not_a_ROM102
JP ExitScript
:StartATRInvalid
MG ATR_at_beginning_appears_to_be_invalid
JP ExitScript
:ExitScript
MG Script_Exiting

Hope this helps! Happy holidays!

[dank]

where do I get NagraEdit compliant Intercept D2C ?
Dank

[Caddylover]

Use N2Edit 2.58 and all your problems will go away.

[dank]

I did USE N2EDIT 2.58 and it shows me my ATR and says rom 102 rev 108
and then error cant read card
DANK