bruiser1
11-22-2006, 01:18 PM
I am having trouble reading and extracting information from two opus cards. Both were working until a recently. I also have a blank Rom11 card which I want to programme to use on either a Sammy dht or pace. I need to retrieve my box key and ird numbers.
I am running the infinity in vcp mode, and all the settings for 3rd party software has been setup correctly using various tut’s. “Mainly the novice angle guide to cable”. I try to open my opus rom10 card (this 1 was used on pace dht- nthell) using nagra edit 5.2. This is what appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 32 40
ROM ID: DNASP010 (unknown)
REV ID: RevA82
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 32 40
ROM ID: DNASP010 (unknown)
REV ID: RevA82
Error, unsupported card type
Closing COM1.
There is no data in the “data space” section
Xtreme Nagra Card Studion v1.8a
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
Along with a seperate window with the heading “BUG TITANIUM2 SETTINGS”
General settings
ID5401 Delay 150 TwB 880 KO yes K1 no 0000000000000
Jump $009B Maxl $0366
Emm and Loader
Ticked-_Code to /execute/emm (80..BF [To Be Loaded $0360])
FA5FD6D021E7C05CA30826F6CD919AD011C00881
Not- tickedAlternative Loader (80..CF)
9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9
GO
I press Go and this appears………
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
BugKey=3e7e9d7816F79327
BugTableBuild: Building Bug Tables 0..$7FFF…
BugTableBuild: Ok
The same thing happens in vcp mode when try to open my other opus rom10 card (this one is used on sammy dht-nthell) using nagra edit 5.2.This Card displays a muted lock on the sammy engineer screen and This is what appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM ID: DNASP010 (unknown)
REV ID: RevA86
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM ID: DNASP010 (unknown)
REV ID: RevA86
Error, unsupported card type
Closing COM1.
EXACTLY THE SAME AS THE PACE ROM10 CARD.
HOWEVER THE XNCS ACTS DIFFERENT ON THE SAMMY CARD………..
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Xtreme Nagra Card Studion v1.8a
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
BugKey=3E7E9D7816F79327
BugTableBuild: Building Bug Tables 0..$7FFF...
BugTableBuild: Ok
SendTwkEmm: Tweak emm accepted...
Ecm Being Sent:21005DA0CA0000570355FCFF1088059D9D9D9D9D9D9D9 D0CCD320C5AEA2D2D0CCD320C5AEA2D2D0CCD320C5AEA2D2D0 CCD320C5AEA2D2D0CCD320C5AEA2D2D0CCD320C5AEA2D2D907 8CA8E5FF3897676A35D3FE4FEF4C42C3EB13468EF913805
--------------------------------------------------------------------
Remeber You Can Press ESC at anytime to Halt the process...
Exiting due to iso_error...
using nagra edit 5.2. on the brand new rom 11 card and This is appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Error, unsupported card type
Closing COM1.
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Xtreme Nagra Card Studion v1.8a
----------------------------------------------------------------------------
TitaniumBug2 – Rom11 settings
Provider 5A01 Key 0000000000000000 Ecm Fake Size $88
Send Delay 0 Bug Delay 15700 Hash: 8DFFDCA147D68012
----------------------------------------------------------------------------
[Data to Write]
C08E [Dts Len] 27050D0B0D38791D262923120000 C09C(Firmware) 00000000
C0A0 [UpS/Nb 0000 CoA2 [NipperK] 000070504572204973206120
----------------------------------------------------------------------------
Misc Vars
Un ticked box +/-Varriation 000 ticked box +Attempt Attempt* 2
----------------------------------------------------------------------------
Ticked box Find Initial Delay un ticked box Ignore BAD Rx GO
I press GO………..This appears
ATR=3FFF9500FF918171A04700444E41535030313120526576 4230443C
Info=DNASP011 RevB0D
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 3000.16671758027 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Found the Delay for 1000 @ Time:157000
HeHeHe....Seems the Rom Is Open @ Time:157000 !!!
Then the Xncs jammed. I did the process again and got this……..
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313120526576 4230443C
Info=DNASP011 RevB0D
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 3000.17745610044 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Found the Delay for 1000 @ Time:158000
HeHeHe....Seems the Rom Is Open @ Time:158000 !!!
I then re-open Nagra 5 and the same message appears
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Error, unsupported card type
Closing COM1.
I’m lost now. Is my reader faulty? Are my cards burnt out? What shall I try next? Any Ideas let me know thanx. :o
I am running the infinity in vcp mode, and all the settings for 3rd party software has been setup correctly using various tut’s. “Mainly the novice angle guide to cable”. I try to open my opus rom10 card (this 1 was used on pace dht- nthell) using nagra edit 5.2. This is what appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 32 40
ROM ID: DNASP010 (unknown)
REV ID: RevA82
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 32 40
ROM ID: DNASP010 (unknown)
REV ID: RevA82
Error, unsupported card type
Closing COM1.
There is no data in the “data space” section
Xtreme Nagra Card Studion v1.8a
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
Along with a seperate window with the heading “BUG TITANIUM2 SETTINGS”
General settings
ID5401 Delay 150 TwB 880 KO yes K1 no 0000000000000
Jump $009B Maxl $0366
Emm and Loader
Ticked-_Code to /execute/emm (80..BF [To Be Loaded $0360])
FA5FD6D021E7C05CA30826F6CD919AD011C00881
Not- tickedAlternative Loader (80..CF)
9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9D9
GO
I press Go and this appears………
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
BugKey=3e7e9d7816F79327
BugTableBuild: Building Bug Tables 0..$7FFF…
BugTableBuild: Ok
The same thing happens in vcp mode when try to open my other opus rom10 card (this one is used on sammy dht-nthell) using nagra edit 5.2.This Card displays a muted lock on the sammy engineer screen and This is what appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM ID: DNASP010 (unknown)
REV ID: RevA86
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 38 36 44
ROM ID: DNASP010 (unknown)
REV ID: RevA86
Error, unsupported card type
Closing COM1.
EXACTLY THE SAME AS THE PACE ROM10 CARD.
HOWEVER THE XNCS ACTS DIFFERENT ON THE SAMMY CARD………..
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Xtreme Nagra Card Studion v1.8a
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313020526576 41383240
Info=DNASP010 RevA82
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
BugKey=3E7E9D7816F79327
BugTableBuild: Building Bug Tables 0..$7FFF...
BugTableBuild: Ok
SendTwkEmm: Tweak emm accepted...
Ecm Being Sent:21005DA0CA0000570355FCFF1088059D9D9D9D9D9D9D9 D0CCD320C5AEA2D2D0CCD320C5AEA2D2D0CCD320C5AEA2D2D0 CCD320C5AEA2D2D0CCD320C5AEA2D2D0CCD320C5AEA2D2D907 8CA8E5FF3897676A35D3FE4FEF4C42C3EB13468EF913805
--------------------------------------------------------------------
Remeber You Can Press ESC at anytime to Halt the process...
Exiting due to iso_error...
using nagra edit 5.2. on the brand new rom 11 card and This is appears when I press the green standby sign…reset card ATR
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Error, unsupported card type
Closing COM1.
I Then open xtreme nagra card studio v1.8a and select the yellow warning triangle “under derv” option. This appears
Xtreme Nagra Card Studion v1.8a
----------------------------------------------------------------------------
TitaniumBug2 – Rom11 settings
Provider 5A01 Key 0000000000000000 Ecm Fake Size $88
Send Delay 0 Bug Delay 15700 Hash: 8DFFDCA147D68012
----------------------------------------------------------------------------
[Data to Write]
C08E [Dts Len] 27050D0B0D38791D262923120000 C09C(Firmware) 00000000
C0A0 [UpS/Nb 0000 CoA2 [NipperK] 000070504572204973206120
----------------------------------------------------------------------------
Misc Vars
Un ticked box +/-Varriation 000 ticked box +Attempt Attempt* 2
----------------------------------------------------------------------------
Ticked box Find Initial Delay un ticked box Ignore BAD Rx GO
I press GO………..This appears
ATR=3FFF9500FF918171A04700444E41535030313120526576 4230443C
Info=DNASP011 RevB0D
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 3000.16671758027 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Found the Delay for 1000 @ Time:157000
HeHeHe....Seems the Rom Is Open @ Time:157000 !!!
Then the Xncs jammed. I did the process again and got this……..
Opening of port was sucessfull.
ATR=3FFF9500FF918171A04700444E41535030313120526576 4230443C
Info=DNASP011 RevB0D
Retrieving card info...
Card info retrieved :)
--------------------------------------------------------------------
1) Calibration is: 3000.17745610044 Mhz , Acc:5,Use Tsc:Yes
2) Building Bug Table...
2) Using Simple Send method!
3) Encrypting Ecm...
--------------------------------------------------------------------
Found the Delay for 1000 @ Time:158000
HeHeHe....Seems the Rom Is Open @ Time:158000 !!!
I then re-open Nagra 5 and the same message appears
Nagra edit 5.2
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Closing COM1.
I then press the blue arrow read from card…….
Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 31 20 52 65 76 42 30 44 3C
ROM ID: DNASP011 (unknown)
REV ID: RevB0D
Error, unsupported card type
Closing COM1.
I’m lost now. Is my reader faulty? Are my cards burnt out? What shall I try next? Any Ideas let me know thanx. :o