005 nag 2800 rom 102

[flogvil]

Trying to run 2800 rom 102 rev 103 using mrtierworks and codespace blocker.Getting 005 nag with everything i try.Followed 102 guide and had to generate OA datatype.Followed it exactly many times,always 005 nag.Card is from a 301-013 that i couldnt get going.Redid tsop so everything matches.Receiver has been updated.When i read completed image in romexplorer the tier dates and ird exp. dates are 2-1-2007.getting previews and guide is not red.What the heck am i missing.I am using the entire blocker,do i only need part of it?Also tried new11-25 autoroll off of ftapirate it didnt work either.Any ideas to try?Any help very appreciated.Been at this heavy for a month.

[flogvil]

Sorry failed to add if i read image in nagramaster the current keys are right on image.

[hacker]

Are you using the latest version of the blocker? It shoud spoof the rev to 10b.

[flogvil]

Yes it is spoofing to 10b.

[GallDurnit]

Assuming that your card is not married to the reciever it sounds like the SK of the IRD doesn't match the Bin. You'll need to jtag your IRD again. Use GENDT08-V3.3 1st load your card image making sure a bullet is in the 102 circle, then load your tsop image, bullet in IRD seconday key, fill in the proper tsop info, click on Calc SK, You should get successfully generated now save TSOP image. JTAG and you should be watching TV. For what its worth I spent about a month on one too. Good luck!!

[mackscb]

The 2800 does not use the SK. He will need to use a DT08. In GenDT08-SK click the Use IRD RSA radio button instead of the Use IRD SK button.

Once you create the new card bin and tsop file, you will need to write the new tsop file to the reciever. This will require you to jtag the receiver if you haven't previously done that.

[flogvil]

I followed the 102 programming guide that shows the 102 card.I did everything in the guide.Followed every step.If every step in the guide is all you need than i guess the blocker isnt right or you dont use the entire blocker?The blocker or the tiers seems like the only variable that i could have wrong or is the guide missing something?Also i was running 10 to 102 mod on this 2800 receiver earlier.All i did was flash sa5 and streamed till it updated to 854p.Than i changed info to match card.Should i have rewritten the hole original tsop instead?

[mackscb]

I haven't used the codespace blocker, but if it is like the Penga blocker, and you are using private numbers, which I assume you are trying to do, then you would only use the first half of the blocker. If you do this, you will semicolon out the line with the cam ID and change the password to your own. These are at the top of the file in the Penga blocker.

The second half of of the Penga blocker is an AIO with a public cam ID and a broad set of tiers. If you are writing this to your cam that is married to the receiver with a different ID that the public number, that is your problem.

What Tsop image did you bring into GenDT to marry to you cam? If it is the 10 to 102 tsop image, that could be a problem. You should use your original tsop that you saved off the receiver before any modification, or perhaps go back to a virgin image.

[flogvil]

Mackscb, could you please PM me a working blocker that only needs password changed,so i can use my private info.That way i can compare it to what i am using.If that doesnt fix it i will probably have to redo receiver to original.Thanks for your help.

[hacker]

I can pm you a blocker

[mackscb]

Mackscb, could you please PM me a working blocker that only needs password changed,so i can use my private info.That way i can compare it to what i am using.If that doesnt fix it i will probably have to redo receiver to original.Thanks for your help.
Check PM

[hacker]

Nevermind mackscb beet me! :)

[flogvil]

Tried blocker from mack.thanks but that is still giving me 005.Put current keys on image with blocker ran 15 min. still 005. Pulled card unlocked and read and the right keys were on image.Any thoughts on the receiver not being right ? Like i said i was running rom 10 to 102 no rsa with it before and just reflashed sa5 and updated then changed info to match cam.Do i need to totally redo tsop and eeprom back to original and start over or did it matter? Any thoughts?

[mackscb]

The blocker and addon I sent you last night did not roll with the key change that occured around 6:30 tonight, so that can be a varible now. If you're absolutely sure you have the current keys on the bin, then this is probably not the problem.

Do you have an copy of the original tsop and eeprom from this receiver before any modification was done? If you do, I would marry that image to the card. Write this image and the eeprom back to the receiver and see if that gets it going for you.

[flogvil]

SUCCESS!! Started going thru all the steps again checking everything that i had done.I got to checking the tsop i created with gen with the DTO8 modification to match the card.For some reason it was reading and looking fine on the older comp in garage,but when i read it using gen on new pc in house it was showing Wrong info on bootstrap box keys etc.?The same file getting 2 different reads? Cant explain this at all.Went back to scratch with card and receiver and worked great.I did however leave receiver alone as far as using original tsop.So receiver with rom10 to 102 norsa can just be flashed at sa5 and updated and will work.Thanks to mackscb and Hacker for the assistance.Time for cold beer!

[mackscb]

Glad to hear you got it running. Persistance usually pays off.

[hacker]

Happy you finaly got it! That's very wierd you got different info on the old computer. :)