View Full Version : card loop in stream
jailbird
12-12-2006, 07:32 PM
Merry christmas.. card loop in stream as you read this
Public blockers that autoroll are getting looped. RomCode appears to have made it through ok. I'm pulling them too just in case.
hacker
12-12-2006, 07:36 PM
Yup, I was looped charlie go fuck yourself!!
hacker
12-12-2006, 07:39 PM
I was using penga 8b add on. Everybody pull your cards now!!!!!
Yup, I was looped charlie go fuck yourself!! I hear you & feel your pain also and will repeat Charlie Go Fuck yourself! now it's time to turn on my FTA
cold iron
12-12-2006, 07:42 PM
Got me too, it will not read anymore.
Error 019 in receiver probably means looped rom. No ATR in N2Edit for sure means looped. I was running Penga and got hit. Anyone running Codespace get hit?
hacker
12-12-2006, 07:46 PM
I hear you & feel your pain also and will repeat Charlie Go Fuck yourself! now it's time to turn on my FTA
Damn your lucky you have fta, all I have is 3 looped cards and basic cable now.:(
hacker
12-12-2006, 07:49 PM
Did anybody who was changing keys manually, like I should have been doing get hit? And does anybody know if any subs were hit?
jailbird
12-12-2006, 07:49 PM
hang on to your cards.. you can bet an unlooper will emerge now
Subs are up
Romcode is up
VERY private blockers are up
ironhand
12-12-2006, 07:55 PM
I think now's the time for a working unlooper to come out.
jailbird
12-12-2006, 07:55 PM
K i know some of you are pissed.. BUT lets not flood the server with "yes looped also" responses..
What survived???
I only lost one rom, but at todays prices, that's about $150 down the drain. Let's make an effort to outline what made it and what didn't. So far, looks like everything public is getting looped. Havn't heard anyone confirm codespace getting hit, but pretty sure anyone passing B1 EMM on rom102 except romcode is looped. I'd pull that romcode card too until we know for sure they don't hit that one this afternoon. Could be all they need to do is make a minor alteration to the EMM and then even romcode might go down. Better safe than sorry at this point. Charlie has a new toy. Until we know how much he can do with it, better to err on the side of safety.
OverEasy
12-12-2006, 08:12 PM
I'm running Penga's 28J WITHOUT Autoroll so far it's still up and running .
jjjohnson
12-12-2006, 08:19 PM
running codespace.all is ok but just pulled my card to be safe
People are reporting being up with cablehater's blocker too, so it looks like they only hit Penga's blocker, and only hit the autoroll version. Sounds an awefull lot like the B1 morphing EMM Mili warned us about last week.
Please tell us which blocker your using and whether or not your running autoroll when you post.
Romcode autoroll up and running
dishman84
12-12-2006, 08:43 PM
Well Dont Cry Everone Was Warned By A Little Bird Now For Days But I Guess Nobody Listens.....................thats Ok I Couldnt Help Channel 492 Either.
jailbird
12-12-2006, 08:56 PM
Any bin passing B1Emms.....a.k.a..... autoroll bins are the target.
hacker
12-12-2006, 09:06 PM
This really sucks! I have no sattelite and I can't watch anything on my hard drive. I hope dssdoda ships the enigma cards soon, I just ordered one. I think I will try to program a rom 10 so I can get into my hard drive. Did anybody with cablehater's blocker get hit?
0zone
12-12-2006, 09:11 PM
Did anybody with cablehater's blocker get hit?
I heard NOT !!!
signalsnatcher3
12-12-2006, 09:13 PM
Running 4 cams with ex subbed private numbers and V28j and CableHater's 1.51B. All 4 survived, good ATR and unlocked fine. I pulled them untill the problem has been resolved.
Later
chavo_fan
12-12-2006, 09:17 PM
Hi, yesterday I read what Mili wrote about a possible ECM. This morning before going to work, I unplugged the receiver from the electrical outlet and unhooked the satellite cable from the reciever, but I dont recall pulling the card from the receiver. Two questions: Is my card safe since when I unplugged everything the system was ok? and, When is safe to reconnect everything, I mean if I reconnect everything tonigth will it be safe? Thanks but I am practically a Newbie , Thanks
I suggest pulling your roms or running non-autoroll blockers until the guru's have a chance to go through this EMM very closely. I'm no coder, but I'm pretty sure all you need to hit cablehater's and codespace autoroll blockers is to very slightly modify the EMM. They could pull this off easily by this afternoon I'd guess. I'm not even going to run RomCode until this evening just to be safe.
signalsnatcher3
12-12-2006, 09:19 PM
Hi, yesterday I read what Mili wrote about a possible ECM. This morning before going to work, I unplugged the receiver from the electrical outlet and unhooked the satellite cable from the reciever, but I dont recall pulling the card from the receiver. Two questions: Is my card safe since when I unplugged everything the system was ok? and, When is safe to reconnect everything, I mean if I reconnect everything tonigth will it be safe? Thanks but I am practically a Newbie , Thanks
Leave it unhooked untill this thing is figured out. All you had to do is either pull the card or unhook the sat feed for them to be safe.
later
chavo_fan
12-12-2006, 09:34 PM
he, he, I probably Overreacted next timie I will not shutdown the electricity from the panelbox,
Thanks my friends
your not safe with the affected blockers until the ecm is no longer in the stream, SO use a diferent blocker unless the one your using is one of the safe ones!
Good Job pulling power and cable while not using it.
cancom
12-13-2006, 12:00 AM
I suggest pulling your roms or running non-autoroll blockers until the guru's have a chance to go through this EMM very closely. I'm no coder, but I'm pretty sure all you need to hit cablehater's and codespace autoroll blockers is to very slightly modify the EMM. They could pull this off easily by this afternoon I'd guess. I'm not even going to run RomCode until this evening just to be safe.
Hi JT
We were warned several times!
That is the beauty of running a max&mel emu.
ECM warning last week = pull the ROM cards, fire up the Cemu computer and slide in the fake card.
ECM that Charlie!
CMD 64 in the stream for over a month tells me that we are not done yet!
I see no reports of IRD loc id 0000001.
For those that were not hit, may I suggest AUXing your ROM card and running PGM's ST19X. For those that were hit, my sincere condolences, there is CEMU10b that requires no card at all.
On the bright side, biz just tripled as it does after every ECM.
cancom
Guroojee
12-13-2006, 12:15 AM
There is ATR repair kit out on one of site but the guy is saying it is in other language may be German and he can read only start and stop . it is on hashhu. just putting it here for info don't think that will work.
josmed
12-13-2006, 12:24 AM
Did anybody who was changing keys manually, like I should have been doing get hit? And does anybody know if any subs were hit?
mine was working fine when I got to it, have been changing keys mannually all along
changing over to my sub but getting 013, This is a subscription channel which has not been purchased have had it on 102 for awhile and nothing
stormy777
12-13-2006, 12:30 AM
i'm certain they will expand this ecm
i'd keep all plastic out for now
even the no roll and be safe
this could stay in the stream for days
i'm guessing we will see a rev update when the
smoke clears
spanga
12-13-2006, 12:31 AM
if sub was out of stream for a while you may want to phone in to get it updated
running codespace.all is ok but just pulled my card to be safe
Yup it survived, but am also pulling card
josmed
12-13-2006, 12:40 AM
if sub was out of stream for a while you may want to phone in to get it updated
mine was out about a month and keys should have rolled, never had to call them before but this time I am going to have to it looks, almost a hour and no channels
Hi JT
We were warned several times!
....
Thanks for rubbing it in Cancom!:cool: I do have some max/mels going. I was being lazy with the old lady's set up. Guess it's time to take my laptop over to her place and get her set up with emu now too. I can only absorb the loss of so many roms before it really starts to suck. I did notice some weird responses even with the emu this morning though. Had to reboot and loaded new keys manually then all's been fine since.
woods
12-13-2006, 01:55 AM
hitting pengas blocker that passes b1 emm, from what i have read its marking otp, then if it sees mark it loops cam, and disables map forever. So even if we managed to get back into cam, map is done. no map no picture.
o2world
12-13-2006, 02:17 AM
COdespace here,..manual keys,..still going,..pulled card now just in case. Thnx for the heads up everyone.
the_mod
12-13-2006, 02:37 AM
Is there or has there...... ever been a "No ATR".. Rom102 card come back to life with any means?
I got hit by the latest ecm loop card...... :(
Now it says card not inserted correctly or something like that...... any way to fix this or is my $220 dollar ROM 102 card officially a ice scrapper now?
Thanks, in advance.
mcarthur70
12-13-2006, 02:38 AM
i must have a 4 leaf clover stuck up my ass ..... just got home 7:45 est had autoroll passing everything .seen this post jumped up and went and checked and was working . i pulled but its been in there all day long !!!! was a bga on a waffer ... but it did not get hit ...
mcarthur70
12-13-2006, 02:39 AM
also its running on a 501 ...
spanga
12-13-2006, 02:43 AM
haven't seen anything from 103's or bga revs....was this only a 102 whacking?
made it through so far with pengas and cablehaters addon bring it bitches i have many more cards
hacker
12-13-2006, 02:49 AM
i must have a 4 leaf clover stuck up my ass ..... just got home 7:45 est had autoroll passing everything .seen this post jumped up and went and checked and was working . i pulled but its been in there all day long !!!! was a bga on a waffer ... but it did not get hit ...
You lucky son of a bitch! Lol just kidding. But seriously I was running pengas auto-roll which hardly passed anything and got hit, your passing everything and your telling us your card wasn't fuckin looped!? You should probobly pull your card just in case though :D
jojobinks
12-13-2006, 02:55 AM
lost mine...running public info with penga and cable hater...lost it before i could pull it after work...guess ill reflas with sub sw02 info for now
r40kh
12-13-2006, 03:32 AM
I've been using the firebird AIO dated Nov 26 non autoroll for Bev and am still good but have pulled my card. Funny thing is my buddy next door had the same file and he got looped. I don't know what to put on it now to be safe
I see everyone is saying that Cablehater blocker was not hit - First there is no CH blocker - just add-on to the penga's blocker. I was running P + CH add-on with public image and was hit. I know many people running the same blocker but with private numbers and are OK. Was it directed to the public numbers? Was anyone hit with private numbers and public AR blocker?
mcarthur70
12-13-2006, 03:41 AM
yep was a 102 bga out of a 311 .was passing everything ! public info was stilling running when i pulled .lol
spanga
12-13-2006, 03:52 AM
all they gotta do now is gestapo ebay and there's going to be a few testers dead in the water.......do that fta quick step that mili mentioned a coupla months ago and save themselves a cam swap......
old school
12-13-2006, 06:20 AM
I was using "ROM102-REV10Bfor0001-V28J-BLOCKER-CableHaters v1.51 Add-on" with all 4 of my receivers, with autoroll enabled and everything was fine late this evening when I pulled them. You should have seen me racing around the house.:D Public info on 2 and private on the other 2.
philwood
01-03-2007, 08:06 PM
i was and still am running ROM102-REV10Bfor0001-V28J-BLOCKER-CableHaters v1.51 Add-on , still running never pulled ....NO PROBLEM yet.
helpless5
01-03-2007, 08:43 PM
Not sure what is going on. checked net early, nothing going on. Pushed card in got Not Authorized screen. Checked keys, no change, checked expire date, OK. reiserted card now lots of red channels few OK and working. Runing Codespace allowing nothing to pass on a 102 for dish. It's an exsub card receiver matched. Could this ECM be doing this?
studmonkey76
01-03-2007, 09:43 PM
helpless5, i dont think your problem is due to the ecm. double check your expire date for your ird and tiers, red in guide is expired tiers....
Philwood, you want to change your blocker ASAP. There are all kinds of holes in the cablehater patch. Switch to non-autoroll anything.
helpless5, your tiers expired is all.
moneyfarmer0
01-04-2007, 02:42 AM
i am useing rom102 w/10b non auto roll, and got a 005 smart card not auth. error. man, i am so use to changeing keys w/ codeblocker sw, i am lost when real thinking is involved. of course i am a green horn. any help???? obviously not a key change. how do i check and fix expired tiers? i think i know, and will check it out, but please advise...thanks bros.
peace,
mf:cool:
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.