black screen

[CrownRoyal]

I have an enigma , and i followed the instructions to a T , everything works like it should, but all i get is a black screen, i even tried updating the keys.

I have a 4900 p324

am i mising omething or did i ger screwed?

CR

[ToUgHsPoT]

My friend I have the exact same problem. I asked the same question and 1 person responded saying maybe its the public keys. But those keys are correct. If you were able to solve the problem please post what you did for me. If I find what the problem is I will do the same for you.

[CrownRoyal]

I tried 3.6 with same resluts, just black screen

:(

[mili]

Must be your bin.
Also zero out the private keys if you are doing DishNet in those fields.

mili

[ToUgHsPoT]

Must be your bin.
Also zero out the private keys if you are doing DishNet in those fields.

mili

Ok buddy I'll give that a shot and post my results...

[CrownRoyal]

I am using the supplied bin...so i would assume there would be more problems if it was that one

[mikebrat]

I have had black screen also with 2 cards , never have ever got picture, i have tried everything also even on 4 different receivers,013 and 010. i have used all enigma versions also, i just don't get it

[ToUgHsPoT]

Must be your bin.
Also zero out the private keys if you are doing DishNet in those fields.

mili

I followed those instructions to the letter and still getting black screen buddy. I am getting locals though, but that's it.

[mili]

Must be tier issues. I will try geting a good patch out of them in the meanwhile if someone has a good one that is using group tiers don't be shy to pot them.

mili

[m252066]

I also only get a black screen with the enigma. I've got a 301.013 and used the supplied bin files.

[coolgrin]

I also only get a black screen with the enigma. I've got a 301.013 and used the supplied bin files.

did your reciever ever run public numbers on any other card like 102 or atmega?Black screen usually means keys or boxkeys.When entering the keys make sure they are right and make sure there are spaces between the numbers like 00 00 00 00.The card does not roll at the present time so if you are using the default bin you have to change the keys either on the eeprom bin file before you load it or after bin is written to card.If you put keys in before writing the eeprom they will change to the default keys that are on the file.
the update keys button on the program works but not like some think it does not pick up new keys but it will write them to card once you put them in the provided boxes.So basicaly write rom wait till done,write eeprom wait till done change keys to current ones,choose provider and ird type then program card.Once your card has been programmed every time after that to change keys all you have to do is put new keys in(with spaces) and click update keys.nothing else.I hope this helps in some way.

[m252066]

did your reciever ever run public numbers on any other card like 102 or atmega?Black screen usually means keys or boxkeys.When entering the keys make sure they are right and make sure there are spaces between the numbers like 00 00 00 00.

The last time I used this receiver was with ans AVR-X, so if that constitutes a public number, then yes.

As far as boxkeys, I c/p from keyRipper 3.0 and entered 16 pairs of double "00" s all with spaces in between for the private ECM keys.

[ToUgHsPoT]

did your reciever ever run public numbers on any other card like 102 or atmega?Black screen usually means keys or boxkeys.When entering the keys make sure they are right and make sure there are spaces between the numbers like 00 00 00 00.

I know that question wasn't for me, but I would like to throw something in the mix here. I also have rom102 cards that I'm using and I have no problem. When I use the exact same bin (without blocker ofcourse) on my enigma, I get black screen. Sometime in systems info CAM ID S00000000000 and error message "YOUR RECEIVER HAS NOT BE AUTHORISED" I know the bin is good and the enigma card is good, so by the process of elimination sw 3.6 must be seriously flawed. Now, why it works for some people and not others, Bishop gonna have to answer that one. Another thing, when I update my keys then read keys, its never what I updated them to. I zero out the private keys and update it, when I read the card its not zero'ed out.

[coolgrin]

I know that question wasn't for me, but I would like to throw something in the mix here. I also have rom102 cards that I'm using and I have no problem. When I use the exact same bin (without blocker ofcourse) on my enigma, I get black screen. Sometime in systems info CAM ID S00000000000 and error message "YOUR RECEIVER HAS NOT BE AUTHORISED" I know the bin is good and the enigma card is good, so by the process of elimination sw 3.6 must be seriously flawed. Now, why it works for some people and not others, Bishop gonna have to answer that one. Another thing, when I update my keys then read keys, its never what I updated them to. I zero out the private keys and update it, when I read the card its not zero'ed out.
Is now a good time to send you a bin to try just to see.

[coolgrin]

The last time I used this receiver was with ans AVR-X, so if that constitutes a public number, then yes.

As far as boxkeys, I c/p from keyRipper 3.0 and entered 16 pairs of double "00" s all with spaces in between for the private ECM keys.

what I mean by public numbers are the ird and boxkeys your ird must be changed over to one of these
Dishnetwork IRDs
IRD #: 01 1C 74 6C
Boxkeys: 8C A6 A8 8C FD E2 E2 63
ExpressVu IRDs
IRD #: 02 AF 04 CA
Boxkeys: FD BF 2E 56 AF FA 72 64

[robm661]

i had the same problem with 3.5/3.6 so i tried 3.1b and it works just dont roll

[m252066]

what I mean by public numbers are the ird and boxkeys your ird must be changed over to one of these
Dishnetwork IRDs
IRD #: 01 1C 74 6C
Boxkeys: 8C A6 A8 8C FD E2 E2 63
ExpressVu IRDs
IRD #: 02 AF 04 CA
Boxkeys: FD BF 2E 56 AF FA 72 64

yeah, I put in the new boxkeys according to the installation How To. Then I verified the receiver took them by checking with jkeys.

[CrownRoyal]

coolgrin - could you help me out with that ?