Enigma Edit 3.9!

[hacker]

EnigmaEdit3.9 is released. Autoroll bug fix.

hxxp://enigmacards.com/apps/EnigmaEdit3.9.zip

[RaceFan409]

Looking good so far.....Put in old keys and it rolled on 508 in about 2-3 minutes

[hacker]

Glad to here. I am going to try it now and will post back. I am very happy with the support lately...there making great progress!

[hacker]

Wow rolled in 10 seconds!

[Ohms]

Works with public tsop on 501, but 019 error on married ex-sub key set 510.

510 software @ P365. Has never worked on this box. Always 019

[JT]

Works with public tsop on 501, but 019 error on married ex-sub key set 510.

510 software @ P365. Has never worked on this box. Always 019

Using same card in both boxes Ohms?

[Ohms]

yes. I have two but the problem does not follow the card.
The enigma card does not really use the EEPROM you provide. It only uses pieces of it. If Enigmaedit is looking for a particular piece of data at a specific location, but your eeprom, for whatever reason, has that data in a different location, then the result is corrupted data being written to the card.

This card is not anything like the armulator. Based on my observations, it will not be able to accept a REV update from the stream unless the way it is programmed is completely changed. If it would, it would be a great way to get REV dumps, and to test home made blockers and such. I just don't expect that to happen. IMHO

With that said, If what you want is to watch TV, then it is working very well with Enigmaedit 3.9 and public no-rsa tsop on my 501. No freezing (yet) and keys rolled very quickly. This is the same IRD/TSOP combo that works well with CEMU. I switch back and forth depending on what I am trying to do.

[lalfie]

Any comments on how it's working with the Dish/ Bev. 2700 receiver?

[babacan]

Hello,

let me explain to you what I did...step by step..

1. I opened negramaster with EEPROM_Dish
2. I changed my timezone, my ird, box keys, and build cfg code
3. then I saved everything
4. I opened enigma 3.9
5. I did a test card and everything went ok
6. I loaded rom
7. What I saved in eeprom, I then loaded (step in number 3)
8. I then chose my ird under the "501" and then I hit program card.

After doing all this, all of my channels are coming out black (except for 101, 103, 500, etc. of course). In some channels like ch 300, I only hear sound and see no picture.

I need help fixing this problem please and Thank You.

[ToUgHsPoT]

My friend trust me, its not you. I and many other people have the exact same problem. I've been testing for more than 8 years so I believe I know a thing or two on how to follow instructions in this regard.

I do however have the ExpressVu running on the public bin with 3.9

But no matter what I do, the dish bin does not work public nor private

[Ohms]

Here is what I did to get it running on dish with public numbers. There is a ton of info on how to setup your IRD for CEMU. It's basicly a no-rsa tsop with public numbers. That's what I did. I got CEMU running first. As soon as I did that, enigma started working with the included bin. I did not edit the bin at all. Just programmed and it's running perfectly right now. I say perfectly because it's rolling keys quickly as I put in the wrong ones to make sure, and it is not freezing. It's not perfect because I still have not figured out how to change my time zone and tiers. I only have 2 ppv channels and no locals and the guide is off.

I have tried MrTierworks, Nagramaster, and GenDT08 to set the timezone and none would get any video after I edited the included bin. The unedited bin works fine.

If the application included a place to set the timezone, blackout string, and PPV tiers, it would be SWEET!

[hacker]

I have problems with using my own bin or editing theres too. Works good with the supplied bin with some freezing. BTW my enigma rolled the latest key change and my atmegas didn't! First time that ever happened.

[tommyoz]

I have problems with using my own bin

Same here. I have only gotten one private bin to work and that was with an earlier version of Enigma with a Bev 3100. I can't get it to work now with the latest version.

Their provided public bin works great which leads me to believe that it must be something with either Tierworks or the private bin not having the proper data in the right place. I don't know just guessing.

[babacan]

Hello,

Let me explain again to you what I did...step by step..

1. Use jKeys to save your TSOP flash.
2. Open Flash Edit
3. Select your IRD's model from the "Model" drop-down.
4. Browse for your own ird tsop file (the one you just saved with Jkeys)
5. "Open" your TSOP image in Flash Edit
6. Click on "Advanced"
6. Change IRD#(HEX) to the one we have provided you with:
IRD #: 011C746C
7. Change Box Keys to the one we have provided you with.
Boxkeys: 8CA6A88CFDE2E263
8. "Check" on Fix CRC
9. Click on "Save As..." to save your modified TSOP flash.
10. Use jKeys to write the new modified TSOP to your IRD.
11. Disconnect the cable and insert the card in your IRD. Keys will roll in less than 60 seconds, if not then change to channel 202 and wait. Alternately you may just enter the current keys in the software and click Update Card or edit your BIN.

MY 501 WORKS WITH ENIGMA CARD :p

[Ohms]

I have problems with using my own bin or editing theres too.


Same here. No matter how I try, I can't get that friggin timezone fixed. as soon as I edit the bin, WHAMO... no workie no more

[mili]

It seems their host once again dropped the ball. I will be happy to arrange for a host for you Bishop just email me if you need my help.
I am happy to see that you guys are on top of the software lately.

mili

[tommyoz]

Hello,

Let me explain again to you what I did...step by step..

1. Use jKeys to save your TSOP flash.
2. Open Flash Edit
3. Select your IRD's model from the "Model" drop-down.
4. Browse for your own ird tsop file (the one you just saved with Jkeys)
5. "Open" your TSOP image in Flash Edit
6. Click on "Advanced"
6. Change IRD#(HEX) to the one we have provided you with:
IRD #: 011C746C
7. Change Box Keys to the one we have provided you with.
Boxkeys: 8CA6A88CFDE2E263
8. "Check" on Fix CRC
9. Click on "Save As..." to save your modified TSOP flash.
10. Use jKeys to write the new modified TSOP to your IRD.
11. Disconnect the cable and insert the card in your IRD. Keys will roll in less than 60 seconds, if not then change to channel 202 and wait. Alternately you may just enter the current keys in the software and click Update Card or edit your BIN.

MY 501 WORKS WITH ENIGMA CARD :p

If you are answering me, I am talking about Private bins not Public. I have public working fine.

[ToUgHsPoT]

Hey Mili, did you receive my most recent email regarding one of the enigmas I received?

[tommyoz]

So far this is what I got on the 3.9 version of Enigma. I got that same 3100 Bev unit with private info running again. It turned out my tier dates had expired.

Public Bins
301.013 - Dish - Booted up no problem, no freezing and autoroll worked.
2700 - Bev - Booted up no problem, no freezing and autoroll worked.

Private Bins
301.010 & 301.013 - Dish - No picture just black screen. It did however autoroll because the 005 message went away on both.
3100 - Bev - Had the dredded 019 error for a while until I just left it there and it finally booted up, Autorolled and no freezing. However, when changing channels it seems to take a while before the picture comes in.

[litedir4650]

It might be me but after programing it rolled once then no video. Used supplied eeprom bin. testing with 301.010. tried many times , then went back to other bin thats been working.
Also there are cards out there that can't accept a program at all. Something bad with the chip( I have one). Wonder if I send it back Mili will replace it?

[algreek3]

4.0 is out on enigma site...People are FINALLY reporting no freezing, no 019 nag and keys rolling fast...

It looks like the Enigma is finally worth a shot..

I expect source code to be realesed very soon..

[squegee]

3.9 Was a no-go for me. BUT - after loading 4.0, wiping out the private ecm keys and reprogramming with default bn102 file, it came up to black screen, then 019. Took it about 8 minutes to pick up keys and get auth. Now it's going, finally. Will keep posted if it goes down.