Crow 492
03-05-2007, 01:24 AM
ProgDVB basic installation
How I program progdvb
be sure there are not previous instalations that need to be removed.
I test with a Nexus s but there must not be a big difference with cheaper cards except for the need of a cpu in the computer that can handle the load.
install main program as it expected in C:/
Open progdvd program using desktop shortcut and go to "device list" and check that it found the card that you are using.
Open "setting" and go to device option Change from PAL to NTSC also check it below enable remote. enable osd and auto spectral inversion. close it with ok
Back on main screen open: diseqc and mark 1.0 or 2.0; mark distinguish by LNB hit the first *** and in the new screen type lnb :circular, lof :11250
go below where sat are listed and find echo7 and hit it .
Do the same with LNB 2 but find echo5 and hit it.
close and go to channel search menu en channels menu. go to echo 7 and scan all the tp and them do the same with echo 5.
Once finished got to e\a green free channel like NASA and you should get a pictura.
place all the vplug files in the root directory of c:/progdvb
place a keys updated copy of softcamkey in the root of progdvb.
restar the program and toy should have all the channels open
good luck.
play with the list properties to arrange channels. I like "no group" and "order by channel" and "show channel number".
this is up to the tester.
good luck
How I program progdvb
be sure there are not previous instalations that need to be removed.
I test with a Nexus s but there must not be a big difference with cheaper cards except for the need of a cpu in the computer that can handle the load.
install main program as it expected in C:/
Open progdvd program using desktop shortcut and go to "device list" and check that it found the card that you are using.
Open "setting" and go to device option Change from PAL to NTSC also check it below enable remote. enable osd and auto spectral inversion. close it with ok
Back on main screen open: diseqc and mark 1.0 or 2.0; mark distinguish by LNB hit the first *** and in the new screen type lnb :circular, lof :11250
go below where sat are listed and find echo7 and hit it .
Do the same with LNB 2 but find echo5 and hit it.
close and go to channel search menu en channels menu. go to echo 7 and scan all the tp and them do the same with echo 5.
Once finished got to e\a green free channel like NASA and you should get a pictura.
place all the vplug files in the root directory of c:/progdvb
place a keys updated copy of softcamkey in the root of progdvb.
restar the program and toy should have all the channels open
good luck.
play with the list properties to arrange channels. I like "no group" and "order by channel" and "show channel number".
this is up to the tester.
good luck