dp 811 disk netword

[vbytesdc]

DP811 High Definition TV Receiver with OPEN INTERNAL ROM102 and an Interface card SIMPLE PROGRAMMING.

I just received the receiver and all the channels are red except the 101 etc.

I thought i was get a yellow 102 but i got some green wired card

can i used my old atmega 128 programmers or any old programer or do i need to buy a new one?

do i need to subscribe to the script service?
thanks

[Satan]

RoFlMfao..that's priceless....pure and simple

[vbytesdc]

and your point ???

[mopar611]

I can see where satan can get a little excited here bud.. This is basic stuff..

You need to read the directions on top of the pages on how to program
that 811.. It has an internal card on the board.. It does not have
a yellow card.. You need to use that green programmer to communicate
to it..

If you open your receiver up, you will see pogo pins glued to the board..
You connect those pins and then insert the green card into your loader..

The receiver does not come programmed.. So your tiers are expired.. You
need to hook it up and get it going..

You spent alot of money for a first timer.. I hope you carefully read on the
site on how to get it going so you dont fuck it up.. You also need an internal
blocker for the Icam..

Read alot before you continue.. And feel free to ask more questions..

Mopar

[Crazy1_79]

the card is open vbytesdc, but not programmed, highly illegal to send a programmed card, the 811 has a internal card on the board they have taken the chip off the board and mounted it to a card to you can use the card slot (makes programming much easier for you) now you have to find a current blocker and a tier creator. dttierworks is what i use to make tiers for the card. goto www.bellexpress.vu and read up on how to make tiers and blocker, it is this sites sister site and has how to's on it. My first suggestion is to read that card in a iso three or four times and save the image each tiime, you lose that image, you will not have tv until mili's emails you the image he has for it. that takes time for him to dig it up.

[The Lizard King]

and your point ???
That you're too stupid/ignorant to read explicit instructions, and that you probably stream-locked your IRD, and you'll probably never get back into your icam.

An expensive mistake, but funny nonetheless.

TLK :cool:

[vbytesdc]

how would i know if i stream-locked the ird?

[old school]

Should have went fta. The 811 is not for newbies to start learning on. You need to read, read, read and read some more before diving in to this hobby. So many things could go wrong trying to program your chip if you don't know what you are doing. One bad write, and you could be SOL.

[The Lizard King]

how would i know if i stream-locked the ird?
With the IRD connected to the TV but NOT to an outside d!$h antenna, go into the third system info menu with your remote (Menu --> 6 --> 1 --> 3 --> Next --> Next). What does it say after DNASP?

TLK :cool:

[vbytesdc]

102Rev103

[The Lizard King]

102Rev103
Good news! You're not locked out of our card.

TLK :cool:

[vbytesdc]

Hey , alright cool and thank god!!!!!!

[vbytesdc]

so do I need a programmer and need to subscibe to 6 months Private DishNet Blocker for ROM102 cards. (http://dssftp.com/xcart/product.php?productid=59&cat=0&page=1) ?

can I try one of my older programmers to read the card. I have no hookups like the pics on ...311.html

[vbytesdc]

Opening COM1.
ATR String: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50
31 30 32 20 52 65 76 31 30 33 64
ROM ID: DNASP102 (ROM102)
REV ID: Rev103
IFS has been set.
Backdoor found.
Backdoor ready for communications.
Reading EEPROM...
Card read successfully.
Efficiency: 100.0%, Packets: 292, Retries: 0, Time: 4.58s
Closing COM1.
card with programmer

[The Lizard King]

so do I need a programmer and need to subscibe to 6 months Private DishNet Blocker for ROM102 cards. (http://dssftp.com/xcart/product.php?productid=59&cat=0&page=1) ?
Yes to the ISO programmer part. No to the RomCode subscription.

can I try one of my older programmers to read the card. I have no hookups like the pics on ...311.html
I don't know. Depends upon what you have.

TLK :cool:

[ghost71799]

Oh my lord or goodness is this the shit I have to post?

I am still here I am not dead yet!

They shit on Devils Zombie.

Your Mo= mma "Not mine."

Ghost

[ghost71799]

This shit is easy "stick a fork in it it's done."

Ghost

[ghost71799]

This is a new saying to all "Fuck-em feed them fish heads."

Ghost

[ghost71799]

Dodge ball, I don't play with others.

I skipped recess because I dont play.

Ghost

[ghost71799]

Do you know how to HACK?

i don't K now SHIT.

Ghost

[old school]

Must be on the sauce again. :D

[vbytesdc]

thanks Lizard King for your help

Ghost what are you talking about "quit it"

[ghost71799]

I can't take it no more "He or she loves me."

Peace out for a while.

Ghost

[ghost71799]

I am not formed out of the box yet.

Please have fun on Milis forum "I guess it's for-um."

I here ya, Don't something out of ghost yet.

Ghost

[vbytesdc]

Thanks again to all for your help


Has anybody use PRIVATEBLOCKER ROM 102 BY SPIDER.zip (http://dssftp.com/files/index.php?m=category&CATID=46#)does it work?:)

[The Lizard King]

Thanks again to all for your help

Has anybody use PRIVATEBLOCKER ROM 102 BY SPIDER.zip does it work?:)
Just use the FREE public c0d3sP4c3 blocker. I've been using it for about a year with no problems.

TLK :cool:

[vbytesdc]

I Down loaded free blocker and autoroll form files section

Not clear on
; write clean image first
; PENGA
what is PENGA ?

what is the code space I need to Clear?

; Firmware Requirement TO JTAG TO IRD:
; Boxkey - 8C A6 A8 8C FD E2 E2 63
; IRD - 01 1C 74 6C
; CAM ID - 03 9A 31 74
; OR DO YOUR OWN BY CHANGING INFO IN
; DATA AREA $A700-$BFFF AND $30D8 CAMID

I do not change boxkey but not clear on how to DATA AREA $A700-$BFFF AND $30D8 CAMID?

so the plan is to
1) read card
2) change patch to fit me
3) apply the two patches
4) watch tv

did I miss anything? do i need to create tiers?

following http://www.bellexpress.vu/311.html instructions as best as i can

can anyone help?

Thanks



read your card clean the code space first then apply

(ROM102-REV10Bfor0001-V28J-BLOCKER-9800v0-PART1.txt) then apply (auto roll add on.txt)
remember to change password at ; YOUR password XXXXXXXXXXXXXXXX
$9878:AABBCCDDAABBCCDD only apply the auto roll addon to this block only

ROM102-REV10Bfor0001-V28J-9800v0-BLOCKER
; REV 10B FOR PROVIDER 0001
; LOAD ENTIRE PATCH OR YOUR PRIVATE INFO
; TO DATA AREA
;
; use n2edit newest or
; other recomended PROGRAMS in an ISO
; not loader
;
; write clean image first
; PENGA
;
; Firmware Requirement TO JTAG TO IRD:
; Boxkey - 8C A6 A8 8C FD E2 E2 63
; IRD - 01 1C 74 6C
; CAM ID - 03 9A 31 74
; OR DO YOUR OWN BY CHANGING INFO IN
; DATA AREA $A700-$BFFF AND $30D8 CAMID
;
; PATCH IN TWO PARTS,
; PART1=BEGIN-A6FF
; PART2=A700-BFFF
;
; your cam ID ,date-Time

[Crazy1_79]

you need to goto the www.bellexpress.vu and read read read the rom 102 programming section. now I am gonna assume that image on card is the married image, read that SOB three tiems and save them as read1, read2, and read3 before you loose that image playing around. you are reading the card so i am gonna say whatever you are usign is fine. the private romcode blockeer is a piece of cake, all tiers and blocker built into one! it is great for someone of your experience if you don't have time to learn the other way. the otehr way is easy too once you do it a few times.

[vbytesdc]

READ READ READ is that like measure 3 times cut once! LOL
Thanks very much

[vbytesdc]

error see jpg and red channels still

[vbytesdc]

updated tiers now i get blank channels

Is this Keys?

[hacker]

If I were you I would get the romcode blocker. That is very very easy and it's a lot safer then public blockers. I used to always use public blockers on my 102's but they all got looped because of it. If I ever get another good 102 card I would definately get romcode.

[Crazy1_79]

not familiar with nagraedit. I us n2edit 2.8 for writing cams. nagraedit is just a pain in the ass, I miss it from the old days though.

[vbytesdc]

bought romcode service installed on card

I get error 122 An internal communication failure

[Crazy1_79]

shit, you have to start with the orignal uncleaned image of that card so romcode knows it is a icam. email mili, there should be a number on that recevier in black marker on the back, he will need that nubmer, tell him you want uncleaned bin from receiver. so romcode will recognize it as a icam and not as a plastic rom.

[vbytesdc]

reloaded virgin image and romcode

and I am up

[Crazy1_79]

good! welcome to 1200 channels and there still isn't shit on. Glad we got ya goign man. enjoy

[vbytesdc]

thanks for all your help again

thks thks