Cemu 1.96.2: red guide

[drwho]

I upgraded to cemu 1.96.2, and AR now works but I am getting red guide (subscription expired) for b4v after about an hour. I used updtiers.exe to set the .bin expiry 30 days from now, but no go.

Any ideas? Its not hardware related as I didnt have problem with earlier versions..

[Crazy1_79]

it is the famous desub, once a hour is bad, I also have this issue with private info 510 however since using seaboards newest cemu, I have yet to see it, been over a day. I can live with every other day or so. but man, once a hour would be rough

[drwho]

This is v1.3.10? I obtained it with the 8/15 emu6805.cc and 8/7 morph2.cc updates. It finishes compile and makes exe that runs but the following error occurs-- did you get this?

gpp -funroll-loops -frerun-loop-opt -fomit-frame-pointer -O3 -Wall -g -DFAST_CEMU -c morph2.cc
morph2.cc: In member function 'int c6805::Run(int)':
morph2.cc:701: warning: large integer implicitly truncated to unsigned type
morph2.cc:702: warning: large integer implicitly truncated to unsigned type


When I run it, guide OK but black screen (I assume no AR)? Using b*v, public ird

[Dnk]

My Cemu used to desub really bad, I tried everything with the software side of thngs (bins, patchs, cemu versions, atmel flashes) in the end it was my computer. Oddly enough the newer p4 based computer is far worse at emu then a 10 year old p2.

[JT]

I have to agree with Dnk. No desubbing on two machines I know of, but have a friend that desubs every couple days. Reboot and no worries. I've come to the conclusion it's something to do with her computer. (I almost wonder if her machine isn't approaching getting so warm it shuts down, then desubs for some reason) I'd say every hour is something different though. Still might want to check for over heating just as a curiosity.

[drwho]

My same hardware was working last week with an earlier emu version (running for weeks without desubbing).. My system crashed though and I had to reinstall. I couldnt recover my own d*sh.bin, so I had to use an old one someone posted months ago.

I am desubbing with cemu 1.96.2, and in 1.3.10 after I manually entered keys.

I think my new (old!) BIN file is the problem.. Could someone please post a working b*v bin (there is only one for d&sh network in the file sections)?

[smilingjack]

Running v1.3.10, I get the Red channel guide, every so ofter. I just pull the card and put it back in.

I am running it as C:/CEMU , in dos box

Seaboard say I if run it from a Floppy I won't get this, but I need the computer for other things as well.

[ruciz]

red is usually 99% bin, and 1% something else.

try another bin, redo tiers, ensure its patched for the extended CMD07's...
really all you can do. also turn off the automatic tier update in the cnf file as that could be frigging you up.
also change your nbcomp 50 to something like nbcomp 5000, its near the bottom of the cnf and may not be called nbcomp - but something close. i found upping this usualy helps with random desubs.

If you are still getting it, you may need to add the reset mod to your maxMel board.. seems to help people with 6000 IRDs I think.. not sure if it has an effect on like the famous 2700s or 3100s.

[drwho]

What is the reset mod for max/mel? I do have the 6000 ird but have been using the same flash for >6months, havent came across this..

still looking for a working b*v bin :confused:

[ruciz]

This should do.