tigert422
10-12-2007, 06:33 AM
I restarted up my DVB-s card and mytheatre. Forgot how to set this up and scan all of my post in the past and came across this set-up instrction from another tester and thought it would be great to have it re-posted as I myself forgot how to go thru these step. Enjoy and Have a Great day!!
Originally Posted by casemodgod
I'm going to give you my settings in MyTheatre because its what I use. I know this works at least with N1, as I'm testing N2 plugins and stuff now (cleaned it all out, fresh plugins dir to eliminate problems).
If you have a DishPro 500 first off you need to edit your ini files, all the Horizontal's need to be changed to Vertical's. You do that via the following method:
Take this # 25600 - the Horizonal TP Frequency for example 12231 = 13369
You change the line that says 12231,H,20000,5/6 to say
13369,V,20000,5/6 ok.
The reasoning behind this, someone else can care to explain to you, I just plain know it works ok. I just edited a freshly made ini file from Lyngsat to verify all the TP's and it is updating as I type.
So, lets continue on to the relevant satellite settings in the LNB/DIseqc area in MT
For Echo7 you want the following if you have a DP500 and a single cable coming from it (which you do, DO NOT PUT SWITCHES INLINE OF THIS CABLE, IT WORKS FINE STRAIGHT SHOT FROM THE DISH):
Echo7: Diseqc CSW-LNB1 (Committed LNB Slot 1)
LOF: 11250000, SW: 1220000 LOF2: 11250000
Import the ini file you edited previously for Echo7 at this point, and check your settings again, make sure its all correct as I put it above.
Echo 6,8: Diseqc CSW-LNB2 (Committed LNB Slot 2)
LOF: 11250000 SW: 12700000 LOF2: 11250000
Import your inif file for Echo6,8 at this point, and check your settings again, make sure its all correct as I put it above.
Now, you want to pick either sat and select all TP's, and scan. I have a total of about 700 channels that just got pulled in (I'm sure some are mirrors, but thats not the issue really at this point ok).
Originally Posted by casemodgod
I'm going to give you my settings in MyTheatre because its what I use. I know this works at least with N1, as I'm testing N2 plugins and stuff now (cleaned it all out, fresh plugins dir to eliminate problems).
If you have a DishPro 500 first off you need to edit your ini files, all the Horizontal's need to be changed to Vertical's. You do that via the following method:
Take this # 25600 - the Horizonal TP Frequency for example 12231 = 13369
You change the line that says 12231,H,20000,5/6 to say
13369,V,20000,5/6 ok.
The reasoning behind this, someone else can care to explain to you, I just plain know it works ok. I just edited a freshly made ini file from Lyngsat to verify all the TP's and it is updating as I type.
So, lets continue on to the relevant satellite settings in the LNB/DIseqc area in MT
For Echo7 you want the following if you have a DP500 and a single cable coming from it (which you do, DO NOT PUT SWITCHES INLINE OF THIS CABLE, IT WORKS FINE STRAIGHT SHOT FROM THE DISH):
Echo7: Diseqc CSW-LNB1 (Committed LNB Slot 1)
LOF: 11250000, SW: 1220000 LOF2: 11250000
Import the ini file you edited previously for Echo7 at this point, and check your settings again, make sure its all correct as I put it above.
Echo 6,8: Diseqc CSW-LNB2 (Committed LNB Slot 2)
LOF: 11250000 SW: 12700000 LOF2: 11250000
Import your inif file for Echo6,8 at this point, and check your settings again, make sure its all correct as I put it above.
Now, you want to pick either sat and select all TP's, and scan. I have a total of about 700 channels that just got pulled in (I'm sure some are mirrors, but thats not the issue really at this point ok).