no signal on some transponders

[kglsz]

Im using a vs pro
i recieve most of my channels on sat nimiq i recieve only odd TP with a s 80% & q 75%
on echostar i recieve only the even TP
with s 80% & q 75%
ive changed lnb's
ive changed cables
my settings are:
LNB frequeancy 11250
22khz tone off
diseqc1.0 none
diseqc1.1 none
lagacy sw none
motor type disable
tp freq 12224
it is a direct connection from dish to reciever
and the LNB is the one that came with the B*ll 3100 reciever
so far i've tried changing the cables and the LnB
still the same results
and im missing some channel i think do to this
what am i missing or doing wrong? and what should i do now?

[calin]

Thanks for your info, but lacks some important data, which reciever are you talking about??? With that we can give you more specific procedures.

[kglsz]

view sat vs pro

[richard g]

i don't have a vs pro, but on my extreme make sure you have lnb type-- standard or universal. otherwise try factory defalt and rescan. hope this helps

[vegaslightsss]

I am going through the same thing with my converted Pansat 301.13 I am only getting the same transponders you are exactly,Vegas

[kglsz]

I have done that, and there is no setting for the lnb type, i have even tried adjusting the satellite for the best signal, still nothing... could it be a bad reciever?

[richard g]

did you load the file with a memory stick or the usb port? i did 1 and i think i had to use the usb port. i also think you might need a vs pro loader program , am not sure

[kglsz]

Usb
that wasn't the problem
i figered it out the lmb need to be set to 11250 lgctwin1 and i got all the channels and signal on all tp
thanks 2 everyone who tried to help :)