301.013 proglem with flash...

[nesjei]

Hi everybody, my reciever is a 301.013 DALD 1 stop, it has Tomiko..... and i wanna flash to No_RSA... . Ok here is the problem, i did my jtag i made my conection, i did my vidmod with 12v with a zener diode and r79 grounded ok fine.The problem is when i wanna click in flash programming its said this:
http://ezimage.us/out.php/i481_NOSE.PNG

I cannot erase anything ...
Can you tell me what to do for fix this problem ??? thanks

[skinerd]

R79 grounded, zener diode mod, you make trace cut......cause that looks like a bad flash chip error.

Zener mod sucks, better is either the 7812 or reisitor/voltage divider methods.

[nesjei]

It has a trace cut, can i make a vidmod with a 9v baterry right ??. But anyway i will make a cut again and good. This reciever wasnt mine. thanks !!!! I'll let you know.

[duffybno1]

i never seen that error before_i'd recheck all connections real closely
i also ground pad 1 of the ird jtag pads to the r79 spot, i think that holds the trap better

[skinerd]

It has a trace cut, can i make a vidmod with a 9v baterry right ??. But anyway i will make a cut again and good. This reciever wasnt mine. thanks !!!! I'll let you know.


Yes, 9v battery works fine.......and like another poster said, make sure R79 is grounded good, he said pin 1 , but really all even numbered pins are ground.
Normally I use pin 2 for R79 and pin 8 for jtag ground. (jtagging from top)

[nesjei]

Yes, 9v battery works fine.......and like another poster said, make sure R79 is grounded good, he said pin 1 , but really all even numbered pins are ground.
Normally I use pin 2 for R79 and pin 8 for jtag ground. (jtagging from top)

http://img3.freeimagehosting.net/uploads/556e686429.jpg


http://img3.freeimagehosting.net/uploads/17cf29cdfe.jpg

http://img3.freeimagehosting.net/uploads/36082c0bcd.jpg

Look R79 is good like that ?? i did like that so if its no like this plss tell me.

[skinerd]

R79 looks ok from this angle.

Make sure the voltage from the diode/resistor is about +12v or so.

[nesjei]

The same, nothing happend. when i click the jkey it said 301.3100 with out 1 flash and i opened nother jkey and in 301.3100 it show everythiing but in 301.3100 i flash it show R00 0000 96 something like that, and BK FFFFFFFFF, so i odnt know what to do, i did everything good and nothign happended. I can watch tv but it cannot take the signal of 110 because i had different reciever NO_RSA that reciever took the signal. im krazy here :--(

[skinerd]

You have to select 301 single flash from drop down receiver window.....

Some no-rsa flashes require the data be relocated, and the receiver will show correctly as a 301/3100......you gotta remove SKs and relocate data.......

Relocated data will show correctly as a 501 "moved bootstrap" too......as the numbers wind up at the same addresses as that flash.

BUT SKs GOTTA COME OUT.

[nesjei]

You have to select 301 single flash from drop down receiver window.....

Some no-rsa flashes require the data be relocated, and the receiver will show correctly as a 301/3100......you gotta remove SKs and relocate data.......

Relocated data will show correctly as a 501 "moved bootstrap" too......as the numbers wind up at the same addresses as that flash.

BUT SKs GOTTA COME OUT.

Can you explain more, because IM trying to understand you. Sorry for my ignorance :confused: