ST19 convert for CEMU

[smilingjack]

it runs from floppy only
it gets PPV & Pron
it runs with any set up / any nembers
(rolls slow, [will get channles] add 5 min for 106 to kick in)

http://bellexpress.vu/forum/local_links.php?catid=64

[felix the cat]

Smiling Jack
I first got card not valid for this receiver.\Then i edited my AIO prvt numbers in Gendt08 and saved as ST19.COR, and replaced in floppy.
Now after aquiring sat all i get are the preveiw ch. all other 005 nag.
I know there are some files i might have to patch to ST19.COR
but i don't witch ones and where to find them ?

Using same setup as in all other CEMU versions:
cpu 1 gig/256 ram win xp
232/2313 board flashed to 10bar .hex

[rbz]

Smilingjack

It worked for me, I was running cemu. Now I can see PPV channels, but after 20-30 mins all the channels go black. I have a 2800 IRD and the st19 is running in an XP pc through COM1. What seems to be the problem?

[felix the cat]

rbz , i supose you can tell us exactly how you got it running in the first place ?

[rbz]

Felix

I was running the last cemu version, I have the files st19.cor, st19.rom, st19xl.exe in a folder and I start it from a batch file st19.bat with the following commands ST19XL.EXE -e4 -d -m75. After several minutes I can see PPV but after 20-30 mins everything goes black. I tried to upload the files but I couldn´t. If you have any idea how to fix this let me know.

[smilingjack]

Try this one, this is the one I am using, just put it in and run "My Disk"

http://bellexpress.vu/forum/local_links.php?catid=64

[Kazy]

Hey smilingjack

You say that it works with any number. Do I need to replace the st19.cor for private?
I tried the original version of this and only received free channels with my own st19.cor.

Kaz

Try this one, this is the one I am using, just put it in and run "My Disk"
http://bellexpress.vu/forum/local_links.php?catid=64

[ruciz]

ST19 works without aux or auxed card due to lack of maps in stream..
history has it this is a good sign of an update coming. Enjoy it while it lasts.

copy st19xl.exe, ST19.ROM and ST19.COR files to your CEMU floppy
edit your autoexec.bat file to say this:

ST19XL.exe -m -pe(COMM PORT of IRD)

replace (COMM PORT of IRD) with your actual comm port number, like 1, 2 etc.

That should be all you need to get ST19 working right now if you have a CEMU setup with a maxmel. not sure about you 1-chippers or 8515/AVR.

[smilingjack]

I just put and it ran

[felix the cat]

It works ,just as sj said.( ppv's and all) ( in rec with same ird/bk/and cam )

Now if i can get my miami locals.

I tried to edit st19.cor file in gendt08 by selecting my tz,zip,and b.o.string

hit patch / check patch/apply patch/save card/save as all files/named
ST19.COR and replaced original in floppy.

Now i can't get anything but preveiws.

changed cor file to original ,and get everything again !

1. How can I get my locals ?

2.Also Is there any way to edit ird/BK/cam to get it to work in my 501 receiver
witch has an AIO public #'s converted to private #'s from MIli's PK's ?

Tried to edit $'s in gendt08, no go.

[JT]

Use one of the tier generaters to add your tier list to the .cor file provided. (I like Mr. Tierworks, but others should work) Erase all tiers, then add your tiers with local and ppv string. Then rename that st19.cor and watch some TV. Don't overwrite the IRD info. It's already in the .cor provided. You will have to add the .bn102 file extention to the .cor file so the tiermaker will recognize it as a rom102 eprom.

[felix the cat]

Use one of the tier generaters to add your tier list to the .cor file provided. (I like Mr. Tierworks, but others should work) Erase all tiers, then add your tiers with local and ppv string. Then rename that st19.cor and watch some TV. Don't overwrite the IRD info. It's already in the .cor provided. You will have to add the .bn102 file extention to the .cor file so the tiermaker will recognize it as a rom102 eprom.

JT I tried over & over every way i can imagine with no luck

I rename to ext .bn102,open in Mr teirs, organize&wipe teirs successfully
Enter my blackout string ,zip.expire dates, ird/bk/cam , modify bin. and save .
message says succssfully written .

Now i rename as ST19.COR and place in floppy,
If i open floppy it was saved as (ST19.COR bn102 )

when i fire it up i get all. but still not the locals i modified in Mr teirworks
only the same ones i had before! (in high or low ch's )

Also tried to patch modified bin from Mr teirworks in Gendt08

Opened the modified bin in Gendt08 patchcard/check/apply/save card
saved as ST19.COR /saved as file type All files.

This time was saved as ST19.COR cor

Replaced in floppy,and now i can't get anything ,even after doing check switch.
:mad:

[JT]

You have to remove the .bn102 extention before writing back to your floppy. Make sure your setting the tier expiry for the future a bit. I altered my .cor images with Mr. Tierworks, so I know it works.

[felix the cat]

You have to remove the .bn102 extention before writing back to your floppy. Make sure your setting the tier expiry for the future a bit. I altered my .cor images with Mr. Tierworks, so I know it works.

I set expiry for may 08
I DO rename my ST19.bn102 to ST19.COR before writing to floppy evry time,but when i open floppy it shows ST19.COR bn102

The only way i know how to remove the bn102 ext. is by using Gendt08
selecting modified ST19.bn102 (with new teirs and my locals)
patch card/check/apply/save card/save as ALL FILES and rename to:
ST19.COR

now when i open floppy I get ST19.COR.cor

However all i get is free ch.'s :mad:

I think I'll just wait a few weeks till things calm down :)

[ruciz]

you simply rename it, by removing the extra .cor
you don't need to use GENDT08 or any other program.

Things are not going to get any calmer if the mapcalls are out of the stream btw.. ROM10's are likely working right now...

[felix the cat]

[quote=ruciz]you simply rename it, by removing the extra .cor
you don't need to use GENDT08 or any other program.

Things are not going to get any calmer if the mapcalls are out of the stream btw.. ROM10's are likely working right now...[/quote

I did that ,but in floppy it shows as ST19.COR
BIN102 file > in light grey
18KB > 1n light grey
With icon of a note pad

Is this correct ?

And still the same ,without my locals