St19xl 2.6.05

[norton]

just saw it posted a bit ago
hxxp://rapidshare.com/files/71822659/st19xl-2.6.05.zip

thanks PGM!!

[vuboy]

Downloading...
Thanks for the linky.

VB

[retiredguy]

confirmed working, thanks for link

[kjp1007]

Confirmed working, thanks for the link and thanks to PGM

[chemlab]

If you have the reset mod on your emulator, there's a bug in the new ver that causes constant resets/error19... Just FYI so nobody pulls their hair out.

[JT]

Could one of you guys that's already downloaded this please upload it to the files section here? Sure appreciate it. I'm not a rapidshare member and I use a common proxy, which means that I can never get a file from rapidshare due to other downloaders.

[t160hq]

tried but seems i am not allowed to upload JT.

seems to be some issue with the dos version too.

works fine with windows auxshare can't get the dos version to work
though.

t160hq

[achanna]

I was able to download the file from the Rapidshare - there are so many files on the folder and none of them is PGM file - i am new to to this don't know what to do next

[tv2k]

If you have the reset mod on your emulator, there's a bug in the new ver that causes constant resets/error19... Just FYI so nobody pulls their hair out.

good thing i didnt pull all my hair, dos version causing nag 19. Thought my dos disk took a sh*t till i see your post.

[JT]

tried but seems i am not allowed to upload JT.

seems to be some issue with the dos version too.

works fine with windows auxshare can't get the dos version to work
though.

t160hq

I'll upload the file now. It's running great from a dos boot disk....at least the version I ended up with is. Some versions aren't compressed for use with a dos boot disk, but the version I got has .exe files for dos, linux and windoze.

[smilingjack]

Someboady from here post
to the fileshop and the RS
it came from ROM10X

[satellitedream]

Anyone remember off the top of their heads what pins to disconnect on the emu to disable the reset mod on a 1489-2313 emu

Thanks in advance

[studyhard]

Anyone remember off the top of their heads what pins to disconnect on the emu to disable the reset mod on a 1489-2313 emu

Thanks in advance

the easiest way is unsold pin 1 from DB9. but if you have 510, you will get a reset every morning, why don't use cemu, it works great now.

[satellitedream]

Thats the first thing i tried. This is what happened, i plug in the receiver, the lights would light up and then turn off as it should but then would turn on. the 522/625 needs two resets and that causes it not to turn on. What i figured as a fix is that after it turns of the lights the first time, you have to hit reset on the keyboard and it works. Thats just my theory so sorry if i'm wrong.

So anyone getting constant resets, disconnect pin 1 from db9 and if you have 522/625 hit R on keyboard after lights go off

[OverEasy]

Just got home downloaded new version and all I get on dos and windows is constant resets/error019. I do NOT have reset mod guess I will wait for new ver.

[jayel]

Don't have any problem w/resets here, but stilll freezing on PPV.

[boshuter]

I'm running 301-13, single chip 2313 emu , cardless, and it's been working perfectly for me, been running for at least 5 hrs with no freezing and all channels working.

Thanks PGM!

[JT]

I'm running 301-13, single chip 2313 emu , cardless, and it's been working perfectly for me, been running for at least 5 hrs with no freezing and all channels working.

Thanks PGM!

Been running about 5 hours here from a boot floppy with no issues here as well. Make sure you use the st19.exe specifically for the system your running. i.e.- use the dos version for a boot floppy, use the linux version for linux, and use the windows version for running in windows.

[OverEasy]

Downloaded new version from Rapidshare and useing Mili's 232/2313 on two 301.013 one dos bootcd and one useing windows getting reset/019 on both. Update them as I always do. Both setups work fine with 2.6.01 except PPV freezing. Now Im scratching my head reading everyones post. :confused:

[JT]

Try the files that are in our files section. For a boot floppy you will also have to overwrite the cwsdpmi.exe file.

[OverEasy]

JT what flash are you useing my 2313 are flashed with rev10C thats the only differents I can think of. Both setups work with 2.6.01 and I did overwrite cwsdpmi file to the dos bootcd. I have never had any trouble updating ST19. Oh and I tryed the ones from the files section here also with No luck same results for both.

[ljintexas]

Gives me an internal comm error or tells me I am trying to use the wrong version of smart card..both the files from the files section here and rapidshare link..same results...2.6.01 works fine with ppv freezing every 5 min.

:D

[ljintexas]

I have never had a problem updating either..been running a 522/ROM103 combo for a year. Something is amiss in the code timing..10C flash here also.
:D

[OverEasy]

I think it sounds like the 10C flash might be the problem. Im not getting that error you reported just constantly resetting/019 error here.

[ruciz]

The flash revision shouldn't change anything unless they are activly verifying card info the receiver sees rather than the true image its using.

Usually the revision is determined by the COR file you are using, and not what your IRD is displaying for a card. Still running BEV REV 245 and Dish REV108 and no issues here... cor's of course are at 247 and 10C respectivly.

[oldtech58]

using linux boot,pub #,still running 10b on the interface does not seem to matter(yet). it works well on all chans. tried on a 2800 so far,should be ok on a 301 also... (cardless version)

have the .imz for linux don't know if u want that uploaded here.
(only mods input on this)..

[JT]

JT what flash are you useing my 2313 are flashed with rev10C thats the only differents I can think of. Both setups work with 2.6.01 and I did overwrite cwsdpmi file to the dos bootcd. I have never had any trouble updating ST19. Oh and I tryed the ones from the files section here also with No luck same results for both.

My atmels are flashed with 10bar.hex. This flash works with Cemu and st19xl for dish. My bell boxes are flashed with Bev248_232_switching flash. 10bar.hex comes stock with any current version of fbprg16. Pretty sure the 10bar.hex flash is in our files section.

[JT]

...
have the .imz for linux don't know if u want that uploaded here.
(only mods input on this)..

If you think anyone else will be able to use the file and you don't mind sharing, yes please, upload it. If you can, please also virus/spyware scan it prior to uploading just to be extra safe.

[t160hq]

Even downloading the version here still getting the same
problem. all dos mode. windows version works without a hitch.
all three worked with 2.6.01 with only freezing on 106 channels.

301-010 flashed with the 10b flash Two ic interface.
constant reset with error 019.

7200 single chip 8515 flashed over a year ago no idea what flash is on it
works on all channels but ones using new 106 key. Those channels
get blank screen.

7100 two ic interface flashed with 10b flash.
works the same as 7200 mentioned above.

all three use seperate private bins. None of them use public
bins.

this may be some sort of bin issue. the only common factor is
all three were updated to 10c and 106 keys with scripts not
stream updated.


will be playing with them today. I'll let you know what i come up with.


t160hq

[jayel]

Try the files that are in our files section. For a boot floppy you will also have to overwrite the cwsdpmi.exe file.

Why would I need to overwrite cwsdpmi file. It's been the same ver., date etc. since the begining, I've never overwritten it with any update of stl19xl.

[JT]

I'm running private and public numbers with the latest cemu and st19, and both are running fine here. (both versions running on off boot disk) Something is going on that we are missing. I have current firmware on all my boxes. Maybe that's it, even though I doubt it. I run only internal three chip max/mel boards. Running only 301 models here, but I doubt that's relevant either.

[t160hq]

so far i can only get the dos version to run with windows in a dos window with
aux card turned off. weird that.

i'll start over with my dos disk and see where that gets me.

t160hq

[t160hq]

Ok problems solved sort of.

On the 7xxx receivers it turned out to be the cor files. After
redoing them from scratch both worked fine.

on the 301 couldn't find the problem with the constant reset
so i switched it to a linux boot setup and it works like a
charm.

t160hq

[OverEasy]

Well I tryed it with 10bar.hex with the same results. Its got to be some bug in the code. Maybe PGM well release an update soon.

[JT]

Well I tryed it with 10bar.hex with the same results. Its got to be some bug in the code. Maybe PGM well release an update soon.

What kind of emu board you running overeasy?

[OverEasy]

Mili's 232/2313 Max/Mel the one in the store here. I have three on hand 2 flashed with rev10C and 1 flashed with 10bar.hex same results with them all. And they all work with 2.6.01 just freezing PPV. :confused:

[JT]

I don't think there is anything wrong with the code. There shouldn't be any issues with the board either. How are you programming your atmel?

[OverEasy]

With jeepers and Mili's simple atmel programmer never had any trouble till 2.6.05
also I edited my above post with more info.

[OverEasy]

The reason I said there might be something wrong with the code is Im not the only one having problems with 2.6.05. Normaly with these updates to ST19XL no one has problems with it. Some were reporting it not working with the reset mod. Well some IRDs want work correctly without the reset mod right ?

[chemlab]

There's a 100% confirmed problem with the windows, and I think dos versions of 2.6.05; Reset mod causes st19 to constantly reset and display error19.

IRD's don't really need the mod, but the pvr's shutdown every night for maintenence and cause an error in the morning if you don't have the reset mod so you have to manually reset st19 daily.

The reason I said there might be something wrong with the code is Im not the only one having problems with 2.6.05. Normaly with these updates to ST19XL no one has problems with it. Some were reporting it not working with the reset mod. Well some IRDs want work correctly without the reset mod right ?

[JT]

With jeepers and Mili's simple atmel programmer never had any trouble till 2.6.05
also I edited my above post with more info.

Maybe try flashing with fbprg16 boot disk. That seems to be about the best I've found. Even more reliable than xpatmel. If there is something wrong with the code then explain why my boot disk version of 2.6.05 works perfectly? I've been watching it a lot today too. Hasn't frozen once. You have to remember that basically the only thing your going to read on a forum like this is stuff like "it's not working".

[Scoobydooo]

New version of ST19 is not working with the reset mod. As soon as I undid the connection on Pin 1 of the DB9, it fired right up.

Side note, I don't want to hijack the thread, but how do you convert this new st19.exe to work with linux?

Thanks,

Scoobydoo

[pecker88]

New version of ST19 is not working with the reset mod. As soon as I undid the connection on Pin 1 of the DB9, it fired right up.

Side note, I don't want to hijack the thread, but how do you convert this new st19.exe to work with linux?

Thanks,

Scoobydoo

In the original st19 folder from rapidshare, their are win, dos and linux folders. Just pick your poison!!

BTW: treid new dos version with a 508 that had internal 3chip max/mel with reset mod and its worked great all day.

Tried same dos version on 522 with external max/mel with reset mod and get 020 nag. No biggie though, i'm just gonna compile a linux boot disk and run that, heard their are no probs. with linux.

PGM....rock on, thanks for the freeware!!!!!!!!

[Scoobydooo]

In the original st19 folder from rapidshare, their are win, dos and linux folders. Just pick your poison!!


Duh! lol

Thanks,

Scoob

[JT]

In the original st19 folder from rapidshare, their are win, dos and linux folders. Just pick your poison!!

BTW: treid new dos version with a 508 that had internal 3chip max/mel with reset mod and its worked great all day.

Tried same dos version on 522 with external max/mel with reset mod and get 020 nag. No biggie though, i'm just gonna compile a linux boot disk and run that, heard their are no probs. with linux.

PGM....rock on, thanks for the freeware!!!!!!!!

Ok, I failed to mention that I did get the 020 error "card not valid for this receiver" nag a couple times. I've only gotten it during boot up. Once the program is running I haven't seen the nag.

[OverEasy]

JT are you useing Mili's max/mel ? Or is anybody useing Mili's max/mel and it working in dos or windows with 2.6.05 ? I never had to change my setups just to update ST19 to a newer version.

[JT]

Mili's max/mel is an external two chip board. I'm running internal three chip boards. The boards I'm using have the 232 switching chip so I can leave the max/mel installed and still use a rom or other device like Enigma in the same box without doing anything other than powering down the emu computer.

[JT]

Hmmm, this is a stretch, but a thought.....current firmware for most receivers have anti-avr routines. I wonder if some of these devices aren't triggering that trap. I don't see how a card slot device like mili's board would do that, but it might. I know my boards won't because the ground and power source are not supplied by the card slot. They are coming off the receivers MB independently from the card slot in my case. .....damn man, that might be it. How many of you guys having problems are getting your voltage and ground off the card slot? (if you have mili's max/mel, you are getting the voltage and ground off of the card slot)

[OverEasy]

Hmmm, this is a stretch, but a thought.....current firmware for most receivers have anti-avr routines. I wonder if some of these devices aren't triggering that trap. I don't see how a card slot device like mili's board would do that, but it might. I know my boards won't because the ground and power source are not supplied by the card slot. They are coming off the receivers MB independently from the card slot in my case. .....damn man, that might be it. How many of you guys having problems are getting your voltage and ground off the card slot? (if you have mili's max/mel, you are getting the voltage and ground off of the card slot)
.

Well that could explain why yours is running perfect and mine is not. But also mine works with 2.6.01 just fine. The power for Mili's board comes from the card slot. Like I asked before if someone could please confirm Mili's max/mel is working with 2.6.05 update.

[JT]

The more I think about this, the more I think I'm on to something here. Please guys, let us know what style of board your running and where your voltage and ground are coming from. If your using an AVR device or anything that is inserted into the card slot then you are getting your ground and your voltage from the card slot. There are some internal boards that can use the card slot for ground and voltage, but they are the exception to the rule as they are designed specifically to overcome the anti-avr tactics.

[smeggly]

No pulling hair here! It's all been pulled.

Got my 522 going and yes it's the reset line. As soon as I cut pin 1 like mentioned earlier the new dos st code is working for me.

Before cutting reset. Only old ST code would work. New one wouldn't send cam Id to receiver. receiver would show only zeros.


Using P233 dos boot, with aux card for now.
Tiny MaxMel board in card slot

Was getting hit and miss results using linux floppy/no aux before doing this. Will try this next.

Don't mind reseting if it gets everything back.


Hope to get cardless linux floppy going.

[oldtech58]

for what it's worth the 301 i've tested with has not the latest update in it,however the 2800 does have latest update.

and most importantly the "max-mel" 's are home made & i've never gotten power from the card slot,always from a source in the power supplies of any irds. changed this years ago when the newer ird's started sensing the extra current..

st19,cemu both work steadily here.

[pecker88]

earlier stated that a 508 with internal 3-chip c@ncom max/mel was working with reset mod and DOS bootdisk....

This morning turned on the 508 and was at a 019 nag. Inactivity power was enabled.

Just reverted back to 2.6.01. Gonna wait this out...PPV/Porn aren't that important to me.

[t160hq]

I can confirm the mili max mel with 10bar working in dos on a
7200 receiver.

On a 301-010 current firmware mili max mel programmed with with rev10c
or 10bar either one.

works all win lin and dos using 2.6.01

works in win and lin using 2.6.05

constant resets in dos with either smart card not valid or inserted
incorectly nag's.

I think it's on the right track to consider the cardslot power issue.
have a 301 with internal three chip emu it works perfect in
dos mode. when converting i flashed it with rev10c. normally use it
on b3v.

I'm going to try installing the mili max mel internally using a
constant 5 volt supply and see if that has any effect.

t160hq

[pecker88]

I can confirm the mili max mel with 10bar working in dos on a
7200 receiver.

On a 301-010 current firmware mili max mel programmed with with rev10c
or 10bar either one.

works all win lin and dos using 2.6.01

works in win and lin using 2.6.05

constant resets in dos with either smart card not valid or inserted
incorectly nag's.

I think it's on the right track to consider the cardslot power issue.
have a 301 with internal three chip emu it works perfect in
dos mode. when converting i flashed it with rev10c. normally use it
on b3v.

I'm going to try installing the mili max mel internally using a
constant 5 volt supply and see if that has any effect.

t160hq

from my experience, it is the true cardless ird's that are having issues along with single tuner 5xx ird's. All of these ird's require the max/mel to have to the reset circuit otherwise they will not come out of inactivity standby mode. And NO, you cannot dissable this feature on true cardless ird's like 322/522.

With all rom103 ird's, whether the max/mel is internal or external, 2.6.05 will NOT work with DOS or Linux bootdisks. However, when the reset mod is removed on the external max/mel, the DOS boot disk works great. This eliminates the cam slot power issue.

On all older style rom102 ird's like 301/4900 their are NO issues becasue these ird's DO NOT require a reset mod.

Tomorrow gonna test this out by the following:
using an external max/mel WITH RESET MOD on a 301 ird with DOS bootdisk and i almost guarantee it won't work.

Have read that reset mod on internal/external boards with cardless ird's works well in windows?? Going to test that as well.

...test on

[satellitedream]

Just want to throw in what i have tested so far.

On a 522 receiver with internal emu using 1489/2313 emu which has been working for me ever since i made it, using the new st ver 2.6.05, i had problems.

Here's my findings for anyone that is still having issues

1489/2313 with reset mod did not work in dos\windows for me (Constant resets)

1489/2313 with pin 1 disconnected still does not work in dos but works in windows perfectly (have to reboot every morning though which is normal since the reset mod is disconnect and receiver updates at 3am.

So the only sollution that is working for me is windows with no reset mod. All the combinations work on the older st 2.6.01 with reset mod dos/windows.

I have not tried linux version yet so i don't know about that.

I could never get the 522 to work with a max/mel type emu board so i can't test that. Could never sync communications properly from the receiver to the pc. But i know that a few other individuals have the same problem so they switched to 1489/2313 type.

Thats just my two cents, so there is definately a problem with the new st release causing constant resets, anyways i want to thank PGM for the release and all the previous release. THANK YOU!

[ljintexas]

Well, something has changed with the code..reset circuit has worked flawlessly all this time and now the app won't run correctly with it hooked up.
Cut the pin 1 circuit out, and whammo..tv again!

[pecker88]

522 fw L462, DOS bootdisk v2.6.05, external max/mel, NO reset mod...Started it last night and this morning it is still working. Powered ird off over night. Perhaps the latest fw L462 no longer needs the reset mod?

[hughnohoo]

2700 and 3900 232/2313 no reset, running fine. Have read reports tho of peeps using the newer auxshare that get desubbed, but when they change back to the older version, no desubs.
Also, be sure your FW is current...several have reported when they took the update, the reset mod irds began to work properly (as they should).

[lelik]

Just to confirm that "reset mode" problem introduced in win St19xl 2.06.05, always existed on all versions of Linux. I could not make a single version of linux St10xl work unless I would disconect pin1.
Obviously, I have a pvr.
Cheers.;)

[OverEasy]

Ok Im not sure what the reset mod is because I do not use a pvr but with all the problems Im having it's sounds like I have it. Does anybody know if Mili's max/mel comes with the reset mod ?

[pecker88]

Ok Im not sure what the reset mod is because I do not use a pvr but with all the problems Im having it's sounds like I have it. Does anybody know if Mili's max/mel comes with the reset mod ?

is pin1 of db9 connected to max232 pin7 ??? if so, then yes, you have the reset mod.

[jayel]

I am running a 522 with Dos boot disk, ST ver 2.6.05, internal emu with reset mod, I am not having any problem with resets. I am taking 5V from location away from slot.

[smeggly]

jayel:

Where on the board are you getting 5V?

[jayel]

UH! Don't remember right off hand I'll pull the cover and get back.

[smeggly]

Lol, me too
I think I followed a guide but that was 2 years ago

[jayel]

Taking 5V from from "+" side of C742 location on top of board near BGA location. There's no cap. in C742 location. Getting ground from "-" side of same location. By the way I'm using 1489/2313 homemade int. emu board.

[smeggly]

Thanx J

I'm running a homemade max232.
I'll have to do some diggin to see how I hooked up the cardslot. Oldtimers is kickin in, can't member shit.

[OverEasy]

is pin1 of db9 connected to max232 pin7 ??? if so, then yes, you have the reset mod.
Well there is a trace coming off of pin1 of the db9 going to the max232 but I can't figure out witch pin# on the max232. I looked at some of the diagrams for the max232 in SJ's sticky but the pinouts are different and confusing for it . So Im not sure if it's pin7. Most if not all of those diagrams don't show anything connected to pin1 of the db9. So Im assuming this is my problem seeing how all I get out of 2.6.05 is constant resets/019. I still would like someone to confirm a 301.013 working or not with Mili's max/mel running 2.6.05. I also tryed a linux bootdisk with no luck.

THANKS for the help pecker88

[pecker88]

Well there is a trace coming off of pin1 of the db9 going to the max232 but I can't figure out witch pin# on the max232. I looked at some of the diagrams for the max232 in SJ's sticky but the pinouts are different and confusing for it . So Im not sure if it's pin7. Most if not all of those diagrams don't show anything connected to pin1 of the db9. So Im assuming this is my problem seeing how all I get out of 2.6.05 is constant resets/019. I still would like someone to confirm a 301.013 working or not with Mili's max/mel running 2.6.05. I also tryed a linux bootdisk with no luck.

THANKS for the help pecker88
easiest way to check for continuity is to use an ohm meter. Put one contact on pin1 of db9 and the other on pin7 of max. If you get some kind of resistance on the meter, then its connected.

To locate pin7 of max232:
on the top of the chip look for a small dot or circular indention in one of the corners. This would indicate pin 1 and the pin directly across the chip from this dot is pin16.
Like so:
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7 8

good luck.


Jay,
what exactly was your boot up sequence? start emu, then plug in ird, ect...??? Do you have a dummy card in the slot? Do you have reset on cam slot jumped? What flash do you have on your atmel? Something is going on here and i'm bound to fig. it out. One ird will work fine, then a diff ird (same model) with same emu setup will NOT work, WTF???

Thanks

[bud02]

I still would like someone to confirm a 301.013 working or not with Mili's max/mel running 2.6.05. I also tryed a linux bootdisk with no luck.

Running on neighbors 301-013 no video mod no jtag port, popped card and used private info. went over to update st19xl and found their IRD was 020 "The card you have inserted is not valid for use in this receiver." replaced the folders both AUXSHARE and ST19 also new cor file. running fine on pos computer with microXP.
My 501 only lost the premium and PPV channels, running on laptop winXP no reset problems. but it looked like the 301 took a hit did not research it just replaced everything. useing both mili's and those cheep black cards form dooda's the ones that they say dont work on anti tamper IRD's, work fine on 301s and my 501s :D

[satellitedream]

I am running a 522 with Dos boot disk, ST ver 2.6.05, internal emu with reset mod, I am not having any problem with resets. I am taking 5V from location away from slot.


I don't think it is a problem with the 5v, because i also have a 522 running with internal 1489/2313 homemade, and am grabbing power from a 5v regulator on board and not from card slot. But since you are using same ird and same emu as you, would you mind sending me schematic for your emu board. I would greatly appreciate it maybe we could find out why this new version of st is causing problems for some.

[pecker88]

Jayel, as I asked before...
You just might be the solution to this puzzel!!
Please post more specifics of your setup and even the schematic to your board!!

TIA

[OverEasy]

easiest way to check for continuity is to use an ohm meter. Put one contact on pin1 of db9 and the other on pin7 of max. If you get some kind of resistance on the meter, then its connected.

To locate pin7 of max232:
on the top of the chip look for a small dot or circular indention in one of the corners. This would indicate pin 1 and the pin directly across the chip from this dot is pin16.
Like so:
16 15 14 13 12 11 10 9
1 2 3 4 5 6 7 8

good luck

Ok I checked for continuity with a meter and found that pin1 of the db9 is connected to pin14 of max232 also pin2 of the db9 is connected to pin7 of max232

[jayel]

Sorry Guys, I just discovered that I wasn't running the new version of
ST after all. I meant to copy the new ver. to the floppy but somehow didn't get it. I just tried the new version and can't get it to work at all, keep gettin invalid card error. No wonder my PPV's were still freezing. Again, sorry for the mix up.

[studyhard]

Ok I checked for continuity with a meter and found that pin1 of the db9 is connected to pin14 of max232 also pin2 of the db9 is connected to pin7 of max232

if pin1 of your db9 has solder, it means, your board has reset mode. but do not touch the board, you can use the reset mode soon when the new st fix this problem. If you want to dissable reset mode, just disconnect pin1 of the DB9 and you will be all set.

[AnonNewbie]

I'm having issues since yesterday or the day before. I have upgraded to this latest ST19XL, but now I'm getting certain local channels that are all black, as well as most premiums and PPV I've tried resetting, as well as redoing my tiers. No luck. Can anyone offer advice?

Dish, 301.010, MaxMel Internal, Public #'s
Here's a copy of my tiers patch file, if that matters:


;This Nagraedit Patch Created By MR-TierWorks
!Removeall 07 ;Remove all tiers first
!Add 07 27 16B25CF401011100212A16DAA8BE04C6006616B25CF461133B 0000623638A8BE0A04DA90FF00FF ;# 1 [110] (26-1) Chicago IL 8490-8493
!Add 07 24 16B25CF401010100212E16DAA8BE0FAC006616B25CF461133B 0000623638A8BE90FF00FF ;# 2 [110*19] (26-2) Chicago IL 8494-8495
!Add 07 27 16B25CF401011100213016DAA8BE111C006616B25CF461133B 0000623638A8BE0A113A90FF00FF ;# 3 [110*19] (26-3) Chicago IL 8496-8505
!Add 07 27 16B25CF401011100000116DAA8BE0001006616B25CF461133B 0000623638A8BE0A003290FF00FF ;# 4 [119/110] AT100 Part I
!Add 07 24 16B25CF401010100006716DAA8BE0208006616B25CF461133B 0000623638A8BE90FF00FF ;# 5 [119/110] AT100 Part II
!Add 07 24 16B25CF40101010026D716DAA8BE0230006616B25CF461133B 0000623638A8BE90FF00FF ;# 6 [119/110] AT100 Part III
!Add 07 27 16B25CF40101110003B616DAA8BE03B6006616B25CF461133B 0000623638A8BE0A03D190FF00FF ;# 7 [119/110] AT100 Part V
!Add 07 27 16B25CF401011100019C16DAA8BE0190006616B25CF461133B 0000623638A8BE0A01C490FF00FF ;# 8 [119/110] AT100 Plus
!Add 07 27 16B25CF401011100007416DAA8BE0258006616B25CF461133B 0000623638A8BE0A029490FF00FF ;# 9 [119/110] AT200 (Requires All AT100)
!Add 07 24 16B25CF401010100009916DAA8BE02EE006616B25CF461133B 0000623638A8BE90FF00FF ;# 10 [119/110] AT250 Part II (Requires AT100 and AT200)
!Add 07 24 16B25CF401010100039B16DAA8BE039B006616B25CF461133B 0000623638A8BE90FF00FF ;# 11 [119/110] AT250 Part III (Requires AT100 and AT200)
!Add 07 24 16B25CF401010100034616DAA8BE089A006616B25CF461133B 0000623638A8BE90FF00FF ;# 12 [119/110] AT250 Part IV (Requires AT100 and AT200)
!Add 07 27 16B25CF401011100006F16DAA8BE08FC006616B25CF461133B 0000623638A8BE0A0A8290FF00FF ;# 13 [119/110] AT250 Part V (Requires AT100 and AT200)02BC 02D0 000005 00 [119] Super Stations Package 232-238
!Add 07 27 16B25CF401011100000516DAA8BE02BC006616B25CF461133B 0000623638A8BE0A02D090FF00FF ;# 14 [119] Super Stations Package 232-238
!Add 07 27 16B25CF401011100166316DAA8BE7918006616B25CF461133B 0000623638A8BE0A791B90FF00FF ;# 15 [119] East Networks - ATL 5731-5737
!Add 07 27 16B25CF401011100166416DAA8BE7922006616B25CF461133B 0000623638A8BE0A792590FF00FF ;# 16 [119] West Networks - SF 5732-5738
!Add 07 27 16B25CF401011100012C16DAA8BE00CC006616B25CF461133B 0000623638A8BE0AF80090FF00FF ;# 17 [119/110] HBO Package 300-309
!Add 07 27 16B25CF401011100014016DAA8BE00D2006616B25CF461133B 0000623638A8BE0AE00090FF00FF ;# 18 [119/110] Cinemax Package 310-314
!Add 07 27 16B25CF401011100013616DAA8BE00C8006616B25CF461133B 0000623638A8BE0AE00090FF00FF ;# 19 [119/110] Showtime Package 318-323 332-333
!Add 07 27 16B25CF401011100014A16DAA8BE00D6006616B25CF461133B 0000623638A8BE0AC00090FF00FF ;# 20 [119/110] The Movie Channel Package 327-328
!Add 07 27 16B25CF401011100015416DAA8BE00E8006616B25CF461133B 0000623638A8BE0A00FA90FF00FF ;# 21 [119/110] Starz/Encore Package 340-356
!Add 07 24 16B25CF401010100006416DAA8BE2332006616B25CF461133B 0000623638A8BE90FF00FF ;# 22 [ALL] (1) OpenTV/Dish Home -Main 100 9501+ 19000+ 30200+
!Add 07 27 16B25CF40101110007E416DAA8BE07E4006616B25CF461133B 0000623638A8BE0A080790FF00FF ;# 23 [110] (2) OpenTV/Dish Home -Games 19048-19093
!Add 07 24 16B25CF40101010000BB16DAA8BE003B006616B25CF461133B 0000623638A8BE90FF00FF ;# 24 [110] Hallmark Movie Channel 187
!Add 07 24 16B25CF40101010000CB16DAA8BE015E006616B25CF461133B 0000623638A8BE90FF00FF ;# 25 [110] Bloomberg Information TV 203 19029
!Add 07 24 16B25CF401010100015616DAA8BE00E6006616B25CF461133B 0000623638A8BE90FF00FF ;# 26 [119] Western 342
!Add 07 55 0F739B9601013000271016DAA8BE00010011FFFFFF650F8C06 CC7000036300623637A8BE0A7FFF1800002710190001869F64 0F8C0701881D5061792D70657220766965772070726F677261 6D01505056020F8C0001 ;PPV Tier

[pecker88]

I'm having issues since yesterday or the day before. I have upgraded to this latest ST19XL, but now I'm getting certain local channels that are all black, as well as most premiums and PPV I've tried resetting, as well as redoing my tiers. No luck. Can anyone offer advice?

Dish, 301.010, MaxMel Internal, Public #'s
Here's a copy of my tiers patch file, if that matters:


;This Nagraedit Patch Created By MR-TierWorks
!Removeall 07 ;Remove all tiers first
!Add 07 27 16B25CF401011100212A16DAA8BE04C6006616B25CF461133B 0000623638A8BE0A04DA90FF00FF ;# 1 [110] (26-1) Chicago IL 8490-8493
!Add 07 24 16B25CF401010100212E16DAA8BE0FAC006616B25CF461133B 0000623638A8BE90FF00FF ;# 2 [110*19] (26-2) Chicago IL 8494-8495
!Add 07 27 16B25CF401011100213016DAA8BE111C006616B25CF461133B 0000623638A8BE0A113A90FF00FF ;# 3 [110*19] (26-3) Chicago IL 8496-8505
!Add 07 27 16B25CF401011100000116DAA8BE0001006616B25CF461133B 0000623638A8BE0A003290FF00FF ;# 4 [119/110] AT100 Part I
!Add 07 24 16B25CF401010100006716DAA8BE0208006616B25CF461133B 0000623638A8BE90FF00FF ;# 5 [119/110] AT100 Part II
!Add 07 24 16B25CF40101010026D716DAA8BE0230006616B25CF461133B 0000623638A8BE90FF00FF ;# 6 [119/110] AT100 Part III
!Add 07 27 16B25CF40101110003B616DAA8BE03B6006616B25CF461133B 0000623638A8BE0A03D190FF00FF ;# 7 [119/110] AT100 Part V
!Add 07 27 16B25CF401011100019C16DAA8BE0190006616B25CF461133B 0000623638A8BE0A01C490FF00FF ;# 8 [119/110] AT100 Plus
!Add 07 27 16B25CF401011100007416DAA8BE0258006616B25CF461133B 0000623638A8BE0A029490FF00FF ;# 9 [119/110] AT200 (Requires All AT100)
!Add 07 24 16B25CF401010100009916DAA8BE02EE006616B25CF461133B 0000623638A8BE90FF00FF ;# 10 [119/110] AT250 Part II (Requires AT100 and AT200)
!Add 07 24 16B25CF401010100039B16DAA8BE039B006616B25CF461133B 0000623638A8BE90FF00FF ;# 11 [119/110] AT250 Part III (Requires AT100 and AT200)
!Add 07 24 16B25CF401010100034616DAA8BE089A006616B25CF461133B 0000623638A8BE90FF00FF ;# 12 [119/110] AT250 Part IV (Requires AT100 and AT200)
!Add 07 27 16B25CF401011100006F16DAA8BE08FC006616B25CF461133B 0000623638A8BE0A0A8290FF00FF ;# 13 [119/110] AT250 Part V (Requires AT100 and AT200)02BC 02D0 000005 00 [119] Super Stations Package 232-238
!Add 07 27 16B25CF401011100000516DAA8BE02BC006616B25CF461133B 0000623638A8BE0A02D090FF00FF ;# 14 [119] Super Stations Package 232-238
!Add 07 27 16B25CF401011100166316DAA8BE7918006616B25CF461133B 0000623638A8BE0A791B90FF00FF ;# 15 [119] East Networks - ATL 5731-5737
!Add 07 27 16B25CF401011100166416DAA8BE7922006616B25CF461133B 0000623638A8BE0A792590FF00FF ;# 16 [119] West Networks - SF 5732-5738
!Add 07 27 16B25CF401011100012C16DAA8BE00CC006616B25CF461133B 0000623638A8BE0AF80090FF00FF ;# 17 [119/110] HBO Package 300-309
!Add 07 27 16B25CF401011100014016DAA8BE00D2006616B25CF461133B 0000623638A8BE0AE00090FF00FF ;# 18 [119/110] Cinemax Package 310-314
!Add 07 27 16B25CF401011100013616DAA8BE00C8006616B25CF461133B 0000623638A8BE0AE00090FF00FF ;# 19 [119/110] Showtime Package 318-323 332-333
!Add 07 27 16B25CF401011100014A16DAA8BE00D6006616B25CF461133B 0000623638A8BE0AC00090FF00FF ;# 20 [119/110] The Movie Channel Package 327-328
!Add 07 27 16B25CF401011100015416DAA8BE00E8006616B25CF461133B 0000623638A8BE0A00FA90FF00FF ;# 21 [119/110] Starz/Encore Package 340-356
!Add 07 24 16B25CF401010100006416DAA8BE2332006616B25CF461133B 0000623638A8BE90FF00FF ;# 22 [ALL] (1) OpenTV/Dish Home -Main 100 9501+ 19000+ 30200+
!Add 07 27 16B25CF40101110007E416DAA8BE07E4006616B25CF461133B 0000623638A8BE0A080790FF00FF ;# 23 [110] (2) OpenTV/Dish Home -Games 19048-19093
!Add 07 24 16B25CF40101010000BB16DAA8BE003B006616B25CF461133B 0000623638A8BE90FF00FF ;# 24 [110] Hallmark Movie Channel 187
!Add 07 24 16B25CF40101010000CB16DAA8BE015E006616B25CF461133B 0000623638A8BE90FF00FF ;# 25 [110] Bloomberg Information TV 203 19029
!Add 07 24 16B25CF401010100015616DAA8BE00E6006616B25CF461133B 0000623638A8BE90FF00FF ;# 26 [119] Western 342
!Add 07 55 0F739B9601013000271016DAA8BE00010011FFFFFF650F8C06 CC7000036300623637A8BE0A7FFF1800002710190001869F64 0F8C0701881D5061792D70657220766965772070726F677261 6D01505056020F8C0001 ;PPV Tier



Their is an ecm going on right now targeting emu's. Read milli's front page thread.