Atemega 128: Anyone up? [Archive]

mili

11-30-2007, 07:31 AM

Yes everyone else is up and running, you must be doing something wrong. Try ti insert the Atmega in your receiver but this time put the chip end in first. You may need to enlarge teh card slot a bit do succeed, I suggest using a heated steak knife for the operation.
Either that or read the other fucking 1000000 posts that explain why your atmega alongside of everything else except real ROM102 cards is not working.

mili

MaxmMhz

11-30-2007, 08:51 AM

Ok Mili, your also responsible for cleaning up the beer that just shot out my nose when I read that.....:eek:.......:D

Bandit5906

11-30-2007, 01:47 PM

Who was that masked man anyway!

empulse

11-30-2007, 03:43 PM

sarcasm Thats funny shit Mili. But seriously, why isn't my atemga working? /sarcasm

SuperManny

11-30-2007, 04:01 PM

What are you all talking about?:confused:
Both my 128 and 256 are up. I just now checked to make sure.:cool:

tinhorse7911

11-30-2007, 04:11 PM

What are you all talking about?:confused:
Both my 128 and 256 are up. I just now checked to make sure.:cool:
UP way UP....On the top shelf, lol

dw8

11-30-2007, 06:36 PM

Are you completly up I've lost ppv & porn. I don't see to many references to this.
Did I miss something.
using Phoenix 1.1.8

warth

11-30-2007, 06:53 PM

ppv and porn are out yes.. coders know that also.. they are working very hard to get them back you will just have to wait like everyone else unless you have a 102 card.. they are up for now all channels..

POLTERGEIST

11-30-2007, 07:00 PM

Hey Mili, is there a penalty for asking idiotic questions? Didn't see that in the rules but I'm sure it's in there somewhere.
Now that I have your attention, why won't my P4 work in my 301?

billard500

11-30-2007, 07:02 PM

Atmega 128 is down. Noting at all. Is there a fix out there?

tinhorse7911

11-30-2007, 07:37 PM

Atmega 128 is down. Noting at all. Is there a fix out there?
OMG I hope your bloody well joking. If not read post # 2 here

fulmik

11-30-2007, 07:57 PM

oh my god

mardtangewala

11-30-2007, 08:03 PM

OMG I hope your bloody well joking. If not read post # 2 here

U show him tinhotse.

BTW, ATMEGA 128 is down, is there a fix for it?

MaxmMhz

11-30-2007, 08:22 PM

I had regular programming before, but I tried Mili's suggestion using the hot knife and now my IRD won't work........:eek::eek::eek::rolleyes:

billard500

11-30-2007, 08:36 PM

I had regular programming before, but I tried Mili's suggestion using the hot knife and now my IRD won't work........:eek::eek::eek::rolleyes:

LMAO.... To funny

maxheadroom

11-30-2007, 08:41 PM

Atmega 128 is up for me except for ppv, HBO channels, porn, and internationals.
I've read rom 102 is up 100% with dark angel blocker.
FTA is down because of provider 0106 key change, i have not been able to get the new bin as of yet.

mili

11-30-2007, 08:55 PM

I think BEV moved all channels to that new encryption while dish regular channels are still on the old one.

mili

jarmster

11-30-2007, 09:42 PM

i think your right milli

dw8

11-30-2007, 11:54 PM

Thanks I just wasn't sure if I missed something. No problem waiting
not that much on ppv that I can't wait for.

kickemall

12-01-2007, 12:25 AM

Looks like everyone is able to use their keyboards now that porn is down and their left hand is now free.

Bandit5906

12-01-2007, 12:29 AM

I hear they got a new fix for the magic card!

tinhorse7911

12-01-2007, 12:35 AM

I hear they got a new fix for the magic card!
Not only that but a new file is out for the p4 & p5's!!!!

agepag

12-01-2007, 01:59 AM

Well I know that PPV and pron are down, but I just reprogrammed my card and you can still watch alot of the channels 100-300, there are the some of the 300's that you can watch on the high 200 because they are free and I found 3 ppv channels in the upper 8000's but only 3 moives, evan almightly and I don't remember the other 2. Also if you really need a porn fix you can watch those 4 channels 470's? with the strippers and naughty teachers in the 450-460's there no discription on the channel, you just have to find them! Better then nothing I guess!

flippert

12-01-2007, 02:24 AM

what are you using for a file

dudester

12-01-2007, 04:23 AM

Thanks for the smart arse reply Mili, but since there had been nothing in the Atmega forum for the past day or so, and since I was wide open before that, and since 1000000 posts in other forums don't necessarily apply to Atmega, I didn't think it was such a moronic question. By the way, how's Vanilli?

Yes everyone else is up and running, you must be doing something wrong. Try ti insert the Atmega in your receiver but this time put the chip end in first. You may need to enlarge teh card slot a bit do succeed, I suggest using a heated steak knife for the operation.
Either that or read the other fucking 1000000 posts that explain why your atmega alongside of everything else except real ROM102 cards is not working.

mili

POLTERGEIST

12-01-2007, 05:18 AM

Thanks for the smart arse reply Mili, but since there had been nothing in the Atmega forum for the past day or so, and since I was wide open before that, and since 1000000 posts in other forums don't necessarily apply to Atmega, I didn't think it was such a moronic question. By the way, how's Vanilli?

Vanilli, he killed himself didn't he? Ha, ha... that's a good one!! I'm gonna write that one down.
A little out of line aren't ya? When your a guest at someone's home, do you usually lash insults at the host? Milli has every reason to express himself. Have some respect and take your posts elsewhere, your attitude is not welcome here.
Fucking bin-beggers never change, do they.

klamp

12-01-2007, 06:24 AM

bin-beggers ? dis*newbie spill-over:D

mili

12-01-2007, 07:19 AM

Good by dickhead.

mili

agepag

12-01-2007, 07:20 AM

what are you using for a file

I used Popeyes a Losser for over looking satjamming, and new keys, seems to work!

sand7115

12-01-2007, 07:34 AM

whats working with satjamming?

mili

12-01-2007, 07:40 AM

According to Fab5 he fixed the USB Atemga256 cards. We are waiting for the file. This makes Fab5 is the only coder so far who could code around this ECM. Well done man.

mili

MaxmMhz

12-01-2007, 07:53 AM

I hear they got a new fix for the magic card!

Careful Bandit, if the damn fix involves a heated steak knife STAY AWAY! it's an IRDKilla!........................................: D

satnutzz

12-01-2007, 07:56 AM

Good by dickhead.

mili

Mili-you didn't ban him,did you?
[sarcasim]

Ya didn't even answer his question!
[more sarcasm]

lmfao

mili

12-01-2007, 08:27 AM

The fix is out.
http://bellexpress.vu/forum/local_links.php?action=jump&id=1468&catid=29

milil

sand7115

12-01-2007, 08:50 AM

Hi, what can i use that will work on rom103 plastic? And let me say i'm happy i ordered a atmega 256, its on the way.. Thanx for the the news milli thats progress.

gap212

12-01-2007, 06:59 PM

Is anyone up with Atmgega 128...or just 256 is up.

mili

12-01-2007, 07:13 PM

Only USBATMEGA256 cards are up. No Atmega 128, no Atmega256, USBATMEGA256 ONLY.

mili

fubr

12-01-2007, 07:20 PM

so what are you saying?

Domwolf

12-01-2007, 09:00 PM

jajajajajajajaj jajajajjajajaja jajjajajajajajaj can you repeat that , i did not understand milli jajajajajajaj jjajajaajajajjaja

klamp

12-02-2007, 07:35 PM

"you can lead a tester to water, but you can't make them drink".......lol

wolf_gt21

12-03-2007, 08:28 PM

will the clone utility in the atmega files section not work with the current 102 bin to make a working pfg for the atmega?

if not, what is the clone utility for then?

ModDish

12-03-2007, 08:46 PM