st19 xl ver 2.6.06

[smilingjack]

st19 xl ver 2.6.06

Is out in the fles section

http://bellexpress.vu/forum/local_links.php?catid=64

[chemlab]

Working great on both providers, though I don't have the equipment here right now to verify the reset bug from the last version was fixed - release notes say it is.

[mannybeef]

OMG, this is such good news

THANK YOU

PGM is the man.

[90rn10v3r]

Yes, It is working great. Thanks PGM. I am going to send donation on Tuesday when my pay cheque get cleared. Merry xmas.

[mannybeef]

rolls and everything up!!

[day_tona2]

great work coders the end of the world misses us i guess... Right mill

[OverEasy]

C&P from the readme

V2.6.06 - 12/02/2007 - Hopefully the reset bug that was introduced
in the last release is fixed.

Well still get constant resets/error019 with v2.6.06 the reset bug is still there. I realize he worked very hard on this release so Im not conplaining just posting my results Im sure he will fix the reset bug in the next release. THANK YOU PGM

Useing Mili's max/mel with two 301.013 exsubed units both at P346 tryed both dos and win versions.

[mannybeef]

not on 301.010

everything is fine

[OverEasy]

Well I do not need the reset mod with the 301.013 but Mili's max/mel comes with pin1 on the db9 soldered to the max232 chip at pin14 this is a different setup than all the 2 chip max/mel emu schematics posted on here. And I don't want to skrew something up trying to mod the emu. They work flawless with all the older versions of ST19.

[ruciz]

does this work with auxshare, or is a 'true' aux needed now?

[norton]

wow, thats awsome. I just loaded it up and got ppv and 300's back instantly. I am using auxshare 1.2. Great work PGM!!

[sledmanjones]

Working great here,thanks PGM,I'm using Auxshare 1.4 with no issues,thanks to Slasher for that one,you guys rock

[studyhard]

does this work with auxshare, or is a 'true' aux needed now?

no it doesn't need auxshare right now, look like st19 has a function to call map by itself.

[pecker88]

no it doesn't need auxshare right now, look like st19 has a function to call map by itself.

that is not correct. I HIGHLY doubt that pgm would impliment map calls that are specific to the providers. This could potentially put him in hot water w/ the law once again.

DN doesn't have the maps turned on right now, at least for regular channels. Havn't got time to test new version yet.

[studyhard]

all ppv and channels over 300 are openning, without auxshare, so what do you think?

[pecker88]

all ppv and channels over 300 are openning, without auxshare, so what do you think?

I still doubt that they are implimented, but I guess we'll never know casue its not open source.

When auxshare is enabled: tune to a ppv channel, do you see scrolling data in auxshare window?

[JT]

Boot disk versions running here flawlessly. No freezing at all on any channel. Much faster guide in this version than with USB atmega256, and no freezing on 0106 channels. I'm sure this won't last past tomorrow, but it's really great to see this much progress this fast with at least two major ways of playing this game. PGM and Fab5 deserve our support big time.

[studyhard]

I still doubt that they are implimented, but I guess we'll never know casue its not open source.

When auxshare is enabled: tune to a ppv channel, do you see scrolling data in auxshare window?

no scrolling in auxshare when change to ppv channels, It doen't need auxshare, may be no map call at this time? or st19 doesn't need auxshare anymore?

[pecker88]

Boot disk versions running here flawlessly. No freezing at all on any channel. Much faster guide in this version than with USB atmega256, and no freezing on 0106 channels. I'm sure this won't last past tomorrow, but it's really great to see this much progress this fast with at least two major ways of playing this game. PGM and Fab5 deserve our support big time.

yes, I totally agree. Don't know much about the atmega cards, but PGM will always be the king of emu. According to dr. s@gan and others, afraid your right, DN and B3V have the ability to turn us off at any time using their timer routine on any of the maps. Until the full maprom is made public, this will be a reality. Peeps better expect having to update their devices frequently.

Perhaps PGM used a different method of adjusting for the timer routine since their is NO freezing? Maybe he included more op codes and timer routines then what was achieved and made public over on dvbn? Guess only time will tell.

Looks as if ppv/porn/premium channels are not using any maps right now, otherwise you'd see scrolling data in auxshare when tuning to one of thoes ch.'s .

[ruciz]

Thanks for the clearification on the aux situation.

I personally don't care if it works with auxshare, with a true aux, or with no aux at all.. It just amazes me right now that an executable less than 100kb in size can do it all, better than any other solution right now too.. Kudos!

PGM deserves some thank you numbers for this - even if it only lasts a day or 2.

[studyhard]

Does anyone still have constant reset on 510 receiver for this version of st19?

Do your 510 receiver still has constant reset on a board which has reset mod? Please post result.

my have 3 510s one of them ran well now all have constant reset after power outstage.

[ruciz]

Does anyone still have constant reset on 510 receiver for this version of st19?

Do your 510 receiver still has constant reset on a board which has reset mod? Please post result.

my have 3 510s one of them ran well now all have constant reset after power outstage.
Hmm, I am thinkin its related to the power outage..

[studyhard]

me too, but it still ran cemu withou any problem, and I copy over all the files which are used for running 301.13, which is running no reset.

[felix the cat]

I added this to (my disk) a cemu to st19 setup,and it works great!!!:)

My problem is that my 501 ird's have a prvt keyset (from milies PK )

Is there any way to edit any files on floppy to match my private no.s

I preffer not to edit in flashedit / jtag /and marry hdd again.

Also one is many miles away.

[bud02]

I added this to (my disk) a cemu to st19 setup,and it works great!!!:)

My problem is that my 501 ird's have a prvt keyset (from milies PK )

Is there any way to edit any files on floppy to match my private no.s

I preffer not to edit in flashedit / jtag /and marry hdd again.

Also one is many miles away.

Edit the .cor bin
http://www.dssftp.com/forum/showthread.php?t=74481

[jayel]

I having problems with a 522. Works great with old version, but with new 2.6.06 when looking for satellite it stops responding at 2. and gives me an invalid version of card error. I think it may be the flash for 2313 which is still at 38B. Where can I find a new 38C flash for the 522. Or does anyone know what else my problem might be.

[cbpage]

Not sure what I am doing wrong. I changed to the 2.6.06 .exe but I still have no ppv movies or 300's. Just black screen and no sound. Anyone else having this problem?

[t160hq]

Not sure what I am doing wrong. I changed to the 2.6.06 .exe but I still have no ppv movies or 300's. Just black screen and no sound. Anyone else having this problem?
I did with 2.6.05 but it turned out to be the bin. Started from scratch opened
my cor and cleaned it to 103 then rebuilt the bin with tiers and all the current armulator patches and it worked after that without a problem.

Kudos to Bud02. He has put up the entire 10c patch needed for the current update to st19.cor file to bring em from 103 to 10c
with all the necessary code without the hassle of all the patches.

Go to the link in his post a couple posts up from this one

t160hq

[felix the cat]

Tank you bud02 for the reply
Quote:
Originally Posted by felix the cat
I added this to (my disk) a cemu to st19 setup,and it works great!!!:)

My problem is that my 501 ird's have a prvt keyset (from milies PK )

Is there any way to edit any files on floppy to match my private no.s

I preffer not to edit in flashedit / jtag /and marry hdd again.

Also one is many miles away.



Edit the .cor bin
http://www.dssftp.com/forum/showthread.php?t=74481

I still get wrong card inserted messsage .after following all instructions .
Am using Mr teir works and N2edit 2.58

[cbpage]

I did with 2.6.05 but it turned out to be the bin. Started from scratch opened
my cor and cleaned it to 103 then rebuilt the bin with tiers and all the current armulator patches and it worked after that without a problem.

Kudos to Bud02. He has put up the entire 10c patch needed for the current update to st19.cor file to bring em from 103 to 10c
with all the necessary code without the hassle of all the patches.

Go to the link in his post a couple posts up from this one

t160hq

Thanks...I think I did it right. I got the 05 nag initially and then it went to black screen after a few minutes (which everybody else is getting).

When I initially set the emu up, PPVs and movies were already down so I had no real indication anything was wrong.